Qijiang Li

Dr. Qijiang Li

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
QLQijiang Li
Qijiang Li
AWAnjian Wu
Anjian Wu
MZMaolin Zhang
Maolin Zhang
JLJinwei Li
Jinwei Li
JCJianwen Cao
Jianwen Cao
YJYimei Jiang
Yimei Jiang
Iron red, a traditional Jingdezhen overglaze color, is primarily colored with iron oxide (Fe2O3). In traditional processes, the main ingredient for the iron red overglaze color, raw iron red, is produced by calcining iron vitriol (FeSO4·7H2O). Analysis of ancient iron red porcelain samples indicates that the coloration is unstable, ranging from bright red to dark red and occasionally to black. Addressing this, the present study, from a ceramic technology standpoint, conducts a series of calcination experiments on industrial iron vitriol at varying temperatures. Utilizing methodologies such as differential scanning calorimetry-thermogravimetry (DSC-TG), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy with X-ray energy dispersive spectrometry (SEM-EDS), and optical microscopy (OM), this research scientifically explores the impact of iron vitriol’s calcination temperature on the coloration of traditional Jingdezhen iron red overglaze color. The findings indicate that from room temperature to 550 °C, the dehydration of iron vitriol resulted in the formation of Fe2(SO4)3 and a minimal amount of α-Fe2O3, rendering the iron red overglaze color a yellowish-red shade. At 650 °C, the coexistence of Fe2(SO4)3 and α-Fe2O3 imparted a brick-red color to the iron red. As the temperature was elevated to 700 °C, the desulfurization of Fe2(SO4)3 produced α-Fe2O3, transitioning the iron red to an orange red. With further temperature increase to 750 °C, the particle size of α-Fe2O3 grew and the crystal reflectivity decreased, resulting in a purplish-red hue. Throughout this stage, the powder remained in a single α-Fe2O3 phase. Upon further heating to 800 °C, the crystallinity of α-Fe2O3 enhanced, giving the iron red overglaze color a dark red or even black appearance.

31 March 2024 in Materials
Verified
Journal Article
Open access
PDF file
YWYanfang Wu
Yanfang Wu
JLJunjie Lan
Junjie Lan
明吴明轩 吴
明轩 吴
MWMingjun Wu
Mingjun Wu
LTLi Tian
Li Tian
YLYue Li
Yue Li
The restoration of ancient ceramics has attracted widespread attention as it can reveal the overall appearance of ancient ceramics as well as the original information and artistic charm of cultural relics. However, traditional manual restoration is constrained due to its time-consuming nature and susceptibility to damaging ancient ceramics. Herein, a three-dimensional (3D) printing technique was employed to accurately restore Chinese Yuan Dynasty Longquan celadon using hollow Al2O3 microsphere-modified 3D printing paste. The results show that the hollow Al2O3 microsphere content plays a vital role in the printability, physical properties, and firing performance of the modified 3D printing paste. The printed green bodies show no noticeable spacing or voids under moderate rheological conditions. The as-prepared ceramic body modified with 6 wt.% hollow Al2O3 microspheres and fired at 1280 °C exhibits optimal bending strength of 56.66 MPa and a relatively low density of 2.16 g∙cm−3, as well as a relatively uniform longitudinal elastic modulus and hardness along the interlayer. This 3D printing technique based on hollow Al2O3 microsphere-modified paste presents a promising pathway for achieving non-contact and damage-free restoration of cultural relics.

4 September 2025 in Materials
Verified
Journal Article
Open access
PDF file
YFYuyang Feng
Yuyang Feng
CGChenyi Gao
Chenyi Gao
FYFeng Yuan
Feng Yuan
JSJun Sun
Jun Sun
QLQijiang Li
Qijiang Li
This study prepared alkali-activated cementitious composites using high-whiteness kaolin, sodium water glass, and NaOH as the main raw materials. Multiple methods, including FE-SEM, XRD, whiteness/light transmittance tests, shrinkage rate measurements, DSC-TG, flexural strength testing, and hydrolysis resistance testing, were used to investigate the effects of curing temperature and time on material properties. The optimal parameters were determined as kaolin calcined at 1100 °C, activator modulus 1.25, calcined kaolin-to-activator ratio 1:1, and 2.5% deionized water added for molding. The optimal sample achieved a flexural strength of 23.81 MPa, with the bonding strength to porcelain 60.17 times that of gypsum and 1.90 times that of kaolin-bonded materials. Curing below 100 °C slowed polymerization, while temperatures exceeding 100 °C accelerated it, with violent reaction at 120 °C. Curing beyond 10 h reduced flexural strength. A large number of cage-like, ‘zeolite-like’ structures formed, closely relating to material properties. This study provides references for ceramic restoration materials.

25 May 2025 in Crystals
Verified
Journal Article
Open access
PDF file
JLJinwei Li
Jinwei Li
AWAnjian Wu
Anjian Wu
DLDengchuang Long
Dengchuang Long
ZLZiwei Lin
Ziwei Lin
JGJinjun Gao
Jinjun Gao
MZMaolin Zhang
Maolin Zhang
This study investigates the identification of artificial irradiation in thermoluminescence (TL) pre-dose dating of ancient Chinese porcelain to address the challenges posed by sophisticated counterfeiting techniques. While TL pre-dose dating is effective for authenticating ceramics, modern imitations artificially irradiated to mimic ancient doses complicate accurate age determination. By analyzing the TL characteristics of five historical porcelain samples (Song, Yuan, Ming, and Qing Dynasties) and artificially irradiated modern replicas, distinct differences were observed. Natural irradiation samples exhibited lower TL sensitivity, less smooth glow curves, and reduced linear regression fit (R2 < 0.97) compared to artificial counterparts, which showed higher sensitivity, smoother curves, and superior linearity (R2 > 0.97). The following methodology was proposed: annealing samples to erase natural signals, applying equivalent artificial doses, and comparing TL responses. The results demonstrated significant disparities in TL behavior between ancient and irradiated samples, enabling discrimination. This approach enhances the reliability of TL pre-dose dating for porcelain authentication, offering a practical solution to combat forgery in cultural heritage preservation.

10 December 2025 in npj Heritage Science
Verified
Journal Article
Open access
AWAnjian Wu
Anjian Wu
DYDegang Yi
Degang Yi
QLQijiang Li
Qijiang Li
JZJia Zhang
Jia Zhang
JLJinwei Li
Jinwei Li
'Fanhong' (Iron Oxide Red) pigment is an overglaze colorant fired at approximately 800°C, primarily using PbO as a flux and Fe 2 O 3 crystalline phases as the chromophore. Its coloration varied significantly across different historical periods in China, and even within the same era, a phenomenon intricately linked to the complexity of 'Shengfanhong' production techniques. Historical texts such as TiangongKaiwu document the preparation of 'Shengfanhong', but these records remain largely descriptive, lacking technical specificity and scientific explanations of underlying principles. This study employs experimental archeology combined with Differential Scanning Calorimetry-Thermogravimetry (DSC-TG), X-ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Colorimetric analysis, and particle size testing to scientifically decode the "tacit knowledge" embedded in the traditional craftsmanship of 'Shengfanhong' production.

26 May 2026 in Materials
Verified
Journal Article
Open access
PDF file
JSJun Sun
Jun Sun
QLQijiang Li
Qijiang Li
XXXiaoyan Xia
Xiaoyan Xia
MTMin Tang
Min Tang
YLYan Liang
Yan Liang
LOLinxin Ouyang
Linxin Ouyang
This study investigates whether Yuan Dynasty Jingdezhen Luanbai glaze can support cobalt-blue coloration under conditions relevant to early blue-and-white porcelain production. Comparative analyses of archaeological Luanbai and blue-and-white specimens show that the two glaze types have similar average thicknesses, approximately 0.20 mm, and comparable basic chemical compositions, especially in their SiO2 and Al2O3 contents. These results suggest that they belong to related high-temperature calcium–alkali glaze traditions rather than completely isolated technological systems. Simulated firing experiments using five cobalt pigments of different compositions further indicate that Luanbai glaze can support cobalt-blue coloration at 1300 °C in a reducing atmosphere. Compared with unglazed controls, Luanbai-glazed samples showed a more consistent blue appearance and clearer pigment–glaze interaction. XPS and SEM-EDS line-scan analyses revealed differences in the near-surface chemical environment and cross-sectional distribution of Co, Mn, and Fe between glazed and unglazed samples, supporting the role of glaze coverage in color development. Refiring experiments on authentic Yuan sherds further supported the feasibility of cobalt-blue coloration on historical Luanbai glaze surfaces. Overall, the results suggest that the opalescent appearance of Luanbai glaze is not an inherent barrier to underglaze cobalt decoration. This work provides experimental evidence for reassessing the technological relationship between Luanbai and early blue-and-white porcelain.