The number of fault samples for the new nuclear valve is commonly rare; thus, the machine learning algorithm is not suitable for the fault prediction of this kind of equipment. In order to overcome this difficulty, this paper proposes a novel method for the fault critical point prediction of the gate valve based on the characteristic analysis of the operation process variables. The operation process of gate valve switch often contains various fault characteristics and information, and this method first adopts the Shannon entropy to describe the power spectrum of vibration signal relevant to the operation process of gate valve switch, and then employs the mean value of the power spectrum entropy as an indirect process variable and further investigates the differences between the indirect process variable under the healthy state and the fault state with a different fault degree. In addition, the power signal of the gate valve is also employed as the direct process variable and the features of the direct process variable under the healthy state and the fault state with different fault degrees are also investigated. Based on the previous indirect process variable and direct process variable, the prediction approach for the critical point of the gate valve fault is established by analyzing the change in the indirect process variable and direct process variable before and after faults. Finally, the data of a nuclear gate valve experiment are employed to demonstrate the feasibility of the proposed method and the results show that the proposed method can effectively predict the fault critical point of the mentioned nuclear gate valve. If the diagnostic threshold is set properly, the critical point prediction of a nuclear gate valve fault can be realized as 100% or close to 100%. Furthermore, the proposed method can be directly applied to the nuclear gate valve in a nuclear power plant to improve the operation reliability of the valve. At the same time, the method can be applied to the fault diagnosis and prediction of valves in other fields, such as the chemical industry.
The compressor is a critical component of cryogenic separation industrial systems, and its reliable operation is essential for the stable functioning of the entire system. Existing research focuses on predicting compressor conditions using experimental or simulation data, often neglecting analysis based on actual industrial data. To address this gap, this paper presents an innovative prediction model for compressor data utilizing an LSTM–self-attention mechanism, specifically designed for real industrial systems. The proposed model combines the sequential learning capabilities of LSTM with the dynamic feature extraction strengths of self-attention, enabling highly accurate predictions by enhancing sensitivity to critical data features. The actual vibration data from a compressor spanning 12 months are analyzed and compared. The results demonstrate that the proposed model reduces prediction error by in MSE and in RMSE compared to SVR. These findings highlight the model’s potential for real-time monitoring and early fault detection, providing a robust theoretical foundation for condition-based analysis and preventive maintenance in industrial compressor applications.
As a key system in nuclear power plants, nuclear power systems contain high-temperature, high-pressure water media. A steam leak, if it occurs, can at minimum cause system functional loss and at worst lead to casualties. Therefore, it is urgent to carry out steam leakage detection work for high-temperature, high-pressure loop systems. Currently, steam leaks are primarily detected through visual monitoring and pressure gauges. However, if there is a minor leak under high system pressure, the slight decrease in pressure may not be enough to alert the operators, leading to a delay in detecting the steam leak. Thus, this detection method has certain drawbacks. In view of these issues, this paper introduces computer vision technology to monitor the high-temperature, high-pressure loop system and proposes the use of an improved background subtraction method to detect steam leaks in the loop system. The results show the following advantages of this method: (1) It can effectively identify steam leaks at an early stage; (2) it overcomes the difficulty of determining the threshold value for the binarization of grayscale images in traditional background subtraction methods; (3) it eliminates the noise impact brought by the binarization of grayscale images in existing improved background subtraction methods. The introduction of this method provides a new approach for detecting steam leaks in high-temperature, high-pressure loop systems and can be effectively applied in engineering fields. It also offers reference value for the detection of high-temperature, high-pressure media leaks in other fields.
Anodic bonding is broadly utilized to realize the structure support and electrical connection in the process of fabrication and packaging of MEMS devices, and the mechanical and electrical characteristics of the bonded interface of structure exhibit a significant impact on the stability and reliability of devices. For the anodic bonding structure, including the gold electrode of micro accelerometers, the elastic/plastic contact model of a gold–silicon rough surface is established based on Hertz contact theory to gain the contact area and force of Gauss surface bonding. The trans-scale finite element model of a silicon–gold glass structure is built in Workbench through the reconstruction of Gauss surface net by the reverse engineering technique. The translation load is added to mimic the process of contact to acquire the contact behaviors through the coupling of mechanical and electrical fields, and then the change law of contact resistance is obtained. Finally, the measurement shows a good agreement between the experimental results, theoretical analysis and simulation, which indicates there is almost no change of resistance when the surface gap is less than 20 nm and the resistance is less than 5Ω, while the resistance changes rapidly after the gap exceeds 20 nm.