Flexible devices have extensive applications in areas including wearable sensors, healthcare, smart packaging, energy, automotive and aerospace sectors, and other related fields. Droplet printing technology can be utilized to print flexible electronic components with micro/nanostructures on various scales, exhibiting good compatibility and wide material applicability for device production. This paper provides a comprehensive review of the current research status of droplet printing technologies and their applications across various domains, aiming to offer a valuable reference for researchers in related areas.
Flexible temperature sensors have diverse applications and a great potential in the field of temperature monitoring, including healthcare, smart homes and the automotive industry. However, the current flexible temperature sensor preparation generally suffers from process complexity, which limits its development and application. In this paper, a nickel oxide (NiO) flexible temperature sensor based on a low-temperature sintering technology is introduced. The prepared NiO flexible temperature sensor has a high-resolution temperature measurement performance and good stability, including temperature detection over a wide temperature range of (25 to 70 °C) and a high sensitivity performance (of a maximum TCR of −5.194%°C−1 and a thermal constant of 3938 K). The rapid response time of this temperature sensor was measured to be 2 s at 27–50 °C, which ensures the accuracy and reliability of the measurement. The NiO flexible temperature sensor prepared by electrohydrodynamic direct writing has a stable performance and good flexibility in complex environments. The temperature sensor can be used to monitor the temperature status of the equipment and prevent failure or damage caused by overheating.
Electrospray is a typical technology to prepare large amounts of droplets at micro/nano scale. Establishing the relationship between the processing parameters and the motion and distribution characteristics for electrospray droplets is an effective approach to guide the uniform deposition of the electrospray membrane. In this paper, a dynamic model of electrospray droplets based on the fully resolved direct numerical simulation (FR-DNS) method was constructed, and the spatial motion behaviors of charged droplets were simulated. The coupling effect of electric field force, the charge repulsive force, and the gravity on the motion and distribution of electrospray droplets was studied, and the relationship between processing parameters including the applied voltage and distance from the nozzle to the collecting plate and the spatial distribution of charged droplets was clarified in a direct way. The simulation model provided a good approach for the quantitative description of the motion and distribution behaviors for electrospray droplets, which would help to guide the control of the electrospray jet ejection process.
The online monitoring of a multi-jet electrospinning process is critical to the achievement of stable mass electrospinning for industrial applications. In this study, the construction of an ejection state recognition system of a multi-jet electrospinning process based on image processing is reported. The ejection behaviors regarding multi-nozzle electrospinning were recorded by CMOS industrial cameras in real time. The characteristic information regarding the multi-jet cone tip was obtained by processing the images regarding Roberts operator edge detection, Hough transform line detection, and mask histogram analysis. The jet anomalies of the hanging droplets in the nozzle outlet area could be obtained and identified by the vision. The identification accuracy towards the target hanging droplets was more than 85%. This work reports the intelligent control of large-scale multi-nozzle electrospinning equipment.
The accurate and rapid detection and recognition of jet features are key to dynamic monitoring and online control of the electrospinning process. In this study, a real-time recognition system based on OpenCV was introduced into a coaxial laser-assisted electrospinning system to solve the difficulties of accurate jet recognition and to promote an image processing algorithm response. The jet images with laser assistance were more clearly visible than those without laser assistance, and a significant contrast in grayscale levels existed in the jet image to help distinguish jet features. Subsequently, separate algorithms were designed for the jet visible length calculation, and the recognized visible length of the jet and algorithm running speed were compared. The average visible length of the jet with laser assistance was 11.49 mm, which increased by 1.59 mm compared to that without laser assistance. In addition, the running time of the algorithm with laser assistance was 24.89 ms, reduced by 14.84 ms compared to that without laser assistance, indicating the effectiveness of laser assistance to promote the accuracy and running speed of the jet image recognition process. Additionally, real-time detection of the jet angles was achieved to identify instances of excessive deflection during the electrospinning process. Overall, this study has significant potential to promote the dynamic monitoring of an electrospinning jet.
Due to the complex multi-physical field coupling during the multi-nozzle electrospinning process, it is necessary to establish a fast and effective control strategy to maintain a stable multi-jet ejection state. In this study, a multi-jet image processing and jet state prediction system based on OpenCV and PyTorch was introduced to monitor the current electrospinning state in real time and predict the electrospinning state in the next two seconds. The multi-jet ejection process was recorded by a CMOS camera, and the time series images were processed to distinguish different jet states according to the jet area data. Then, the jet area data under different electrospinning jet states were counted as the training data of the neural network, and the prediction accuracy of the best network model after training was greater than 98%. This work has built a significant foundation for the advanced regulation of electrospinning jet ejection and to improve the quality of electrospun membranes.