A low-profile dual-polarized dipole antenna using wideband artificial magnetic conductor (AMC) reflector with stable radiation pattern for use in 2G/3G/4G base stations operating from 1.7 to 2.7 GHz is presented. The antenna consists of a pair of crossed-dipoles and a wideband AMC reflector which consists of an AMC surface, a metallic ground plane, and the air substrate between them. The AMC is designed to operate with 90° reflection-phase bandwidth of 1.64-2.88 GHz (54.8%). Compared with using perfect electric conductor reflector, the profile height of the dual-polarized dipole antenna using AMC reflector is reduced by half from 36 to 18 mm, resulting in the lowest-profile 2G/3G/4G base station antenna. Six metallic ground walls are used to stabilize the radiation pattern, and the resulted half-power beamwidths are around 68±3° and 81±3° in the H- and V-planes, respectively, across the operating band. More measured results show that wide impedance bandwidths of 1.67-2.98 and 1.64-3.05 GHz for the two input ports, isolation of more than 25 dB, and cross-polarization of less than -20 dB are achieved.
26 March 2018 in IEEE Transactions on Antennas and Propagation
A novel miniaturized dual-band dipole array antenna consisting of two parallel $1 \times 4$ subarrays for use in base stations operating in the digital cellular system (DCS) and wideband code division multiple access (WCDMA) bands is presented. Size miniaturization is realized by utilizing band notch dipoles (BNDs) as array elements and artificial magnetic conductors as reflectors for reductions in width and profile height of the array antenna, respectively. Using the BNDs of high radiation suppression at desired notch frequencies, the radiation from DCS subarray is suppressed in the WCDMA band and vice versa. High isolation between the subarrays, therefore, is achieved while reducing the subarray separation. In addition, a dual four-way unequal power divider is designed for beam pattern synthesis. The measured results show that realized gains of 12.1-12.6 and 12.4-13.1 dBi, respectively, within the DCS and WCDMA bands, as well as the first null depth and sidelobe level, respectively, of lower than -20 and -16 dB, are achieved simultaneously, indicating that the proposed array antenna is suitable for potential base station applications.
Detection of breast cancer in its early stage is critical for reducing the death rate. In this paper, a compact and flexible breast tumor sensing system is designed using dual-polarized UWB antenna arrays. Each UWB unit is composed of two orthogonally placed circular monopoles, which are printed on flexible and low-profile Kapton polyimide. The antennas are fed by single-side coplanar waveguides for size reduction. A wide band from 3.9 GHz to 19 GHz is obtained, with an isolation of above 16 dB over the operating band. High fidelity factors are achieved at different solid angles, indicating little distortion of the signal and stable sensing ability. To obtain the image of the tumor, eight UWB units are employed surrounding the breast phantom. Using the reflected and scattered signals from the antennas, 3D images of the breast are reconstructed using delay-and-sum (DAS) algorithm. Attributed to the dual-polarized UWB antennas, accurate location and size of the tumors are retained with little clutter. Moreover, the proposed system can detect two tumors with an edge to edge distance of 15 mm. Experiments have been carried out on rotating platforms, with the tumor successfully detected in the measurement. The proposed tumor sensing system is suitable for wearable applications due to its compact size and flexibility.
5 March 2024 in IEEE Antennas and Wireless Propagation Letters
In this letter, a low-profile dual-band dual-polarized base station antenna system is proposed for 5G applications. Distinct from previous base station antennas using FSS as a decoupling layer, the FSS structure is employed directly as the low band (LB) antenna at 0.69-0.96 GHz. At the same time, the FSS operates as the reflector for the high band (HB) antennas at 3.3-3.8 GHz. Hence, the radiation patterns of both the HB and the LB antennas are restored to match the patterns of the isolated antennas. Stable radiation and high boresight gains are achieved over the operating bands. The antennas are fabricated and measured, with the measurement results agreeing well with the simulated ones. The proposed antenna array is suitable for base stations with large-scale arrays due to its simple structure, low profile and stable radiation features.
16 October 2020 in IEEE Transactions on Antennas and Propagation
In this communication, a novel dipole configuration with reactive loadings is proposed for the design of low-profile dual-band dual-polarized stacked antenna arrays. For lower band (LB1, 3.3-3.6 GHz) dipole, its inductive loadings are implemented at the end of each dipole arm to suppress the basic resonant mode for band rejection at higher frequencies. For higher band (HB2, 4.8-5.0 GHz) dipole, its LC loadings are implemented at the beginning of each dipole arm, where the inductor and capacitor respectively increase the Q-factor for improving out-of-band rejection and balance the impedance matching. Hence, LB1 and HB2 dipoles can be closely stacked with high isolation. Moreover, a dual-band artificial magnetic conductor (AMC) reflector is adopted for reducing the distance between antenna and ground plane. Consequently, the overall height of the proposed one is only 0.16 kL (kL being the free-space wavelength at the center frequency of LB1), which is smaller than the previous dual-band stacked designs. Measurement results demonstrate that the array achieves good impedance matching, high isolation, and stable radiation patterns simultaneously, indicating it a promising candidate for sub-6 GHz base station services.
12 March 2020 in IEEE Transactions on Antennas and Propagation
In this work, a systematic and generally applicable method to synthesize patterns for single antennas is proposed based on characteristic mode analysis (CMA). Both the theoretical analysis and real implementations are taken into consideration. To obtain a desired pattern, we first calculate the weighting coefficient of each mode using the correlation between the characteristic field and the desired pattern. Afterwards, the synthesized current and the feeding vector are solved using CMA, providing feeding information, such as feeding numbers, locations, amplitude and phase. The feeding vector is non-sparse, making practical feeding impossible. In this circumstance, the theory of compressed sensing is applied so that the number of the ports can be greatly reduced, the synthesized pattern is still highly correlated with the desired one. The method is applied to two-dimensional (2D) and three-dimensional (3D) structures, where a mobile handset and a scaled model of the shipboard are utilized as representatives. The prototype of the handset antenna was fabricated and measured, with the desired pattern achieved, having null in the boresight direction and being almost omni-directional on the plane of the chassis. The measured results agree well with the simulated ones. With the synthesized pattern, the handset antenna is robust to the user effects. The method can be generally applied to pattern synthesis for planar and 3D antennas.