5 March 2018 in IEEE Transactions on Antennas and Propagation
A compact single-layer textile MIMO antenna is designed for wearable applications. The theory of characteristic mode is used to guide the antenna design and analyze its performance. The MIMO antenna utilizes a small ground plane as the main radiator, which is capacitively loaded by two strips along two orthogonal edges. The whole system occupies a volume of 38.1 mm × 38.1 mm × 2 mm, with each antenna having a dipole-like radiation pattern of linear polarization. Good isolation of above 12 dB is achieved due to the quasi-orthogonal radiations generated by the two antennas, providing pattern and polarization diversities. The envelope correlation coefficient between the antennas is below 0.01. The proposed antenna, fabricated on a flexible felt with a permittivity of 1.2, has a wide bandwidth of 20%. Due to its broadband behavior, the antennas remain well matched at the target band when worn on the body and bended. The loss of the human tissue results in the drop of the antenna gains to 1.6 dBi and 1.2 dBi, respectively, for the two antennas. The proposed antenna is competitive for wearable applications, due to its compact size, single-layer structure, easy integration, robustness, and reasonable on-body antenna gain.
12 March 2020 in IEEE Transactions on Antennas and Propagation
In this work, a systematic and generally applicable method to synthesize patterns for single antennas is proposed based on characteristic mode analysis (CMA). Both the theoretical analysis and real implementations are taken into consideration. To obtain a desired pattern, we first calculate the weighting coefficient of each mode using the correlation between the characteristic field and the desired pattern. Afterwards, the synthesized current and the feeding vector are solved using CMA, providing feeding information, such as feeding numbers, locations, amplitude and phase. The feeding vector is non-sparse, making practical feeding impossible. In this circumstance, the theory of compressed sensing is applied so that the number of the ports can be greatly reduced, the synthesized pattern is still highly correlated with the desired one. The method is applied to two-dimensional (2D) and three-dimensional (3D) structures, where a mobile handset and a scaled model of the shipboard are utilized as representatives. The prototype of the handset antenna was fabricated and measured, with the desired pattern achieved, having null in the boresight direction and being almost omni-directional on the plane of the chassis. The measured results agree well with the simulated ones. With the synthesized pattern, the handset antenna is robust to the user effects. The method can be generally applied to pattern synthesis for planar and 3D antennas.