The critical structural parameters are optimized and studied using the numerical simulation method to improve the resolution and stability of the Micro-Thrust Measurement Platform (MTMP). Under two different ground random vibration environments, the parameters, such as pivot thickness, pendulum rod length, and pivot structure, are focused on analyzing the influence of the system’s resolution and stability. The results show that when the thickness of the pivot is 0.04 mm or 0.2 mm, and the pendulum rod length is 2 m, the effect of ground random vibration on the MTMP is minimized. At 0.1 mHz, it can reach 0.0057 N/. In the series double-pivot structure, an appropriate increase in the distance between the sheets can further optimize the above conclusions. The results and analysis within this study can provide support for the engineering design of the MTMP.
Space gravitational wave detection missions require micro-propulsion systems with wide-range,high-resolution thrust regulation. Hall micro-thrusters (HMT) exhibit complex nonlinear coupling,as thrust and discharge current are jointly governed by discharge voltage and propellant flow rate.Building the required target thrust–discharge voltage calibration table point-by-point through vacuum experiments is susceptible to noise and drift, and is costly in labor and time. To address this,vacuum experiments yielded 162 valid datasets with measured thrust from 2.34 to 112.12 μN. A residual attention neural network was then built to simultaneously predict thrust and discharge current. Test-set coefficients of determination reached 0.9970 and 0.9990, respectively. Under fixed flow rate, high-resolution thrust calibration was performed with a 0.1 μN step. Adjacent target thrust points required approximately 0.5 V increments in the high-sensitivity region and generally 3–10 V in the high-voltage saturation region. Sensitivity analysis shows thrust sensitivity to discharge voltage reaches about 0.25 μN/V in the low-voltage, high-flow-rate region, while sensitivity to flow rate is more pronounced at mid-to-high voltages, with the two showing complementary distributions. This study provides a data and model foundation for HMT thrust prediction and high-resolution calibration.