A beam shaping assembly (BSA), a neutron moderator system, is a key component of an accelerator based BNCT facility. The neutron energy recommended in the IAEA TECDOC-1223 for the BNCT is much lower than the energy of the neutrons produced by accelerator induced nuclear reactions. The neutron energy depends on the energy of the incident particle and nuclear reaction. Therefore, the BSA should be designed considering the neutron energy dependency. Now, several kinds of accelerators and reactions are used and proposed. Here, neutron producing reaction, moderator system, and activations are introduced.

Neutrons have been used in a wide field of applications by using various neutron sources. Material science is one of the widest research fields. The activity is supported by nuclear research reactors and high-intensity spallation neutron sources based on a high-intensity proton accelerator. However, it is desired to perform a measurement when researchers want to do and to perform adventuresome experiments that have not yet confirmed its importance. Furthermore, trial and error measurements are necessary to improve a measurement method. Compact accelerator-driven neutron sources are suitable for such usage and in some cases can complement the measurement at a large facility. The use of the compact neutron source has sometimes led to new methods. Other than material science, a new application of soft error acceleration test has been performed at the compact accelerator-driven neutron sources. Another neutron application is radiation therapy called as boron neutron capture therapy. In this field, nuclear reactor neutron sources have been used but many of them shut down. It was desired to construct the BNCT facility near a hospital. Therefore, BNCT facilities based on the compact accelerator have been constructed in the world. Here, the neutron sources and new methods and applications developing at compact accelerator-driven neutron sources are introduced.

Neutron imaging has been recognized to be very useful to investigate inside of materials and products that cannot be seen by X-ray. New imaging methods using the pulsed structure of neutron sources based on accelerators has been developed also at compact accelerator-driven neutron sources and opened new application fields in neutron imaging. The world’s first dedicated imaging instrument at pulsed neutron sources was constructed at J-PARC in Japan owing to the development of such new methods. Then, usefulness of the compact accelerator-driven neutron sources in neutron science was recognized and such facilities were newly constructed in Japan. Now, existing and new sources have been used for neutron imaging. Traditional imaging and newly developed pulsed neutron imaging such as Bragg edge transmission have been applied to various fields by using compact and large neutron facilities. Here, compact accelerator-driven neutron sources used for imaging in Japan are introduced and some of their activities are presented.

Fig. 1. Illustraion of the experimental setups of neutron tomography.