In this paper, numerical simulations are carried out to predict the performance of a new designed configuration of the disk magnetohydrodynamic (MHD) generator, which segments the generator into dozens of parts. The behaviors and characteristics of segments are mainly investigated with number of parts at 24, 36, 60, 72, 90 adopted Large Eddy Simulation (LES). The numerical results declared that these division generators approach more stable plasma ionization and better performance than that of the conventional disk MHD generator at the same working conditions. The optimal value can be reached when the angle is 5–10 degrees (36–72 parts). Due to the division of the generator, the internal resistance is larger than that of the conventional disk channel that causes the reduction of Faraday current, hence the Lorentz force, $j_{\theta }B$ , decreased. Therefore, the radial velocity increased and static pressure decreased. Consequently, the reduction of static pressure contributes to improvement to the plasma uniformity and ionization stability. Those features reveal that the designed configuration has the obvious advantage on raising energy conversion efficiency and power output.

A significant growth of research on digital microfluidics has been achieved over the past several decades, and the field is still attracting increasing attention for fulfilling relevant mechanisms and potential applications. Numerous studies have been devoted to actively manipulating droplets in a variety of fundamental and applicational scenarios. In this work, the deformation of ferromagnetic fluid droplets is studied under an external uniform magnetic field. The droplets are precisely dispersed on the bottom surface of a container assembled with polymer methacrylate (PMMA) plates. Mineral oil is applied instead of air as the surrounding medium for easy stretching and preventing water solvent evaporation in ferrofluid. The design and processing of the container are firstly carried out to observe the shape and characterize the wettability of the droplets in the immiscible mineral oil medium. Furthermore, the droplets’ deformation and the working mechanism are given under the action of the horizontal uniform magnetic field. At different magnetic field intensities, the droplet is stretched in the horizontal direction parallel to the applied field. Due to volume conservation, the dimension in the height reduces correspondingly. With the coupling effect of magnetic force, viscous force and interfacial tension, the contact angle first increases with the magnetic field and then basically remains unchanged upon magnetization saturation. Consistent with the experimental results, the numerical method clearly reveals the field coupling mechanism and the nonlinear deformation of the sessile droplet.