Renchuan Zheng

Mr. Renchuan Zheng

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 June 2024 in Shock Waves
Verified
Journal Article
Closed access
PDF file
RZRenchuan Zheng
Renchuan Zheng
JLJ. Li
J. Li
EGE. Gong
E. Gong
QQQ. Qin
Q. Qin
ZFZ. Feng
Z. Feng

26 April 2024 in Energies
Verified
Journal Article
Open access
PDF file
RZRenchuan Zheng
Renchuan Zheng
EGErlei Gong
Erlei Gong
JLJianzhong Li
Jianzhong Li
QYQian Yao
Qian Yao
ZNZhaolong Nie
Zhaolong Nie
This study presents two concepts for integrating a wave rotor combustor (WRC) into a baseline engine: the wave rotor pressure-gain cycle (WRPGC) and the wave rotor work cycle (WRWC). Performance parameters were calculated under different thermodynamic cycles, and a comparative analysis of the thermodynamic cycles was conducted, considering both the ideal- and actual-loss conditions. Furthermore, the impact of the WRC precompression ratio, turbine inlet temperature, and fixed peak cycle temperature on the thermodynamic-cycle performance was investigated. The results indicate that embedding a WRC into a baseline engine with a compressor pressure ratio higher than 24.0 does not lead to an improvement in the thermal efficiency. However, under a baseline engine pressure ratio of 3.6, the actual-loss WRC cycle achieves efficiency improvements of 40.5% and 49.5% in the WRPGC and WRWC, respectively, compared to the baseline engine cycle. Increasing the wave rotor precompression ratio or the turbine inlet temperature ratio results in greater performance improvements for the WRWC compared to the WRPGC. When the peak cycle temperature of the wave rotor is fixed, there exists a narrow pressure ratio range wherein the WRPGC outperforms the WRWC. Therefore, the WRPGC is more suitable for embedment in baseline engines with lower pressure ratios.

31 December 2024 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
ZNZhaolong Nie
Zhaolong Nie
EGErlei Gong
Erlei Gong
JLJianzhong Li
Jianzhong Li
QYQian Yao
Qian Yao
RZRenchuan Zheng
Renchuan Zheng
ZFZhan Feng
Zhan Feng
The centripetal wave rotor combustor can better match the centrifugal compressor and the axial turbine of the reference machine, reduce the size of the engine and simplify the transition section structure. In this paper, we use numerical simulations to investigate the effects of blade shape and blade deflection angle on the unsteady flow mixing characteristics of the centripetal wave rotor combustor and complete the optimization of its structure. It is shown that in all designed channels, flow separation is present. The circumferential shear forces and pressure gradient forces contribute to the uneven distribution of the mixture within the channel, and their effects are irremovable. When the blade curve is tangent to the line connecting the endpoint of the inner diameter and the rotor center, it facilitates a particular configuration. This blade shape can enhance the uniformity of the fuel-air mixture distribution within the channel. The blade deflection angle has little effect on the fuel-air mixture distribution, the pressure distribution, and the prepressurization effect in the channel. Changing the width-to-diameter ratio of the channel, or the size of the ports and the phase difference can improve the distribution of the fuel-air mixture in the channel, and both of them are also the key factors affecting the prepressurization effect.

22 November 2024 in Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy
Verified
Journal Article
Closed access
PDF file
XWXiaonong Wei
Xiaonong Wei
EGErlei Gong
Erlei Gong
WJWu Jin
Wu Jin
JLJianzhong Li
Jianzhong Li
RZRenchuan Zheng
Renchuan Zheng
ZFZhan Feng
Zhan Feng

22 September 2023 in SSRN Electronic Journal
Verified
Preprint
Open access
PDF file
XLXiafei Li
Xiafei Li
JLJianzhong Li
Jianzhong Li
QQQiongyao Qin
Qiongyao Qin
WJWu Jin
Wu Jin
RZRenchuan Zheng
Renchuan Zheng
To realize the stable operation of liquid kerosene/air rotating detonation combustor and explore its fuel mixing and atomization distribution in cold state and detonation combustion characteristics in hot state, in this paper, four kinds of atomization and mixing structures of fuel injection are designed, which are the pairwise combination between direct injection modes of 1 and 4 side wall injection holes and 2 and 3 oil splashing ring injection modes (1, 2, 3 and 4 represent different radial positions from the outer wall to the inner wall). Euler-Lagrange algorithm is used to numerically simulate the cold and hot states of rotating detonation combustor. The results show that in the combination modes of 1-3 and 1-4 that include the external wall direct injection hole, the fuel atomization and mixing effect of the above two structures is better, the fuel evaporation rate is more than 60%, and the fuel mixing uniformity is more than 0.7, because the momentum exchange and the heat exchange per unit area are the highest. Under the condition that the concave wall further intensifies the detonation wave, only 1-3 and 1-4 injection modes of the four injection structures can form stable rotating detonation wave. The phenomenon of partitioning in fuel distribution is observed in the thermal distribution characteristics of liquid fuel. One part is the Kerosene distribution region of slight enhancement in atomization effect caused by heat conduction, and the other part is the Enhanced Kerosene distribution region with significant enhancement in fuel atomization and mixing characteristics caused by back propagation of rotating detonation wave, reduction in gas flow axial velocity and heat conduction. In addition, under the action of enhanced atomization by the pre-film oil splash ring, the cold state evaporation characteristics of the 1-3 mode is better, but its mixing characteristics are slightly worse. With the fuel atomization and mixing characteristics enhanced by hot state detonation wave, the 1-3 injection structure is slightly better than the 1-4 injection structure by virtue of its better evaporation rate, detonation wave propagation frequency and engine specific impulse.