Wu Jin

Dr. Wu Jin


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
GHGe Hu
Ge Hu
QQQiongyao Qin
Qiongyao Qin
WJWu Jin
Wu Jin
JLJianzhong Li
Jianzhong Li
Centrally staged combustion technique is often used in the military high-temperature-rise combustor. The pilot-stage structure affects the flow characteristics in the centrally staged combustor, which further affects the performance of ignition, combustion, and emission of military aero-engines. In order to increase the flow capacity of the swirler, the swirler with a non-rotating channel structure was designed. In this work, the influences of the pilot-stage structure on the flow characteristics in the centrally staged high-temperature-rise combustor are investigated. The flow fields of combustors with different pilot-stage swirl numbers (0.44, 0.60, and 0.71) are analyzed by large eddy simulation (LES). The results demonstrate that the primary recirculation zone (PRZ) becomes gradually longer and wider as the pilot-stage swirl number increases. In the combustors with three different pilot-stage structures, the precessing vortex core (PVC) was formed near the shear layer at the outlet of the pilot stage. The PVC frequency decreased from 1670 Hz to 1425 Hz and 1400 Hz with the increase of the pilot-stage swirl number from 0.44 to 0.60 and 0.71, respectively, and the breakdown position of the PVC shifted forward. The proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD) methods are used to analyze the dynamic flow fields. It was observed that the corresponding frequency of the main pulsation structure decreased, and the flow instability was aggravated with the increase of the pilot-stage swirl number. The results deepen the understanding of the influences of the pilot-stage structure on the flow characteristics in the centrally staged high-temperature-rise combustor.

5 July 2022 in International Journal of Aerospace Engineering
Verified
Journal Article
Open access
PDF file
GHGe Hu
Ge Hu
JLJianzhong Li
Jianzhong Li
WJWu Jin
Wu Jin
JZJingzhou Zhang
Jingzhou Zhang
SGShibin Geng
Shibin Geng
WZWeikuo Zhai
Weikuo Zhai
Reverse-flow combustor is widely used for small engines to overcome high speed shaft whirling problem and to provide a low frontal area. An experimental investigation was carried out to research the flow field characteristics of a reverse-flow combustor in this paper. Different aerodynamic conditions were studied using PIV to reveal the characteristics of both the nonreacting and reacting flow fields. The structure of the nonreacting flow field in the central section shows similarity as the total pressure loss coefficient increases. The penetrating depth, jet angle, recirculation zone position, and the flow streamlines are similar, while the velocity value of the flow field increases. The structure of the reacting flow field on the central section is different from that of nonreacting flow field, but the variation trend of the reacting flow field under different pressure loss coefficient is similar to that of the nonreacting flow field. By examining the nonreacting and reacting flow fields under the same total pressure loss conditions, marked differences were observed in the primary zone close to the swirler outlet. The relative motion between fuel injection, airflow, and combustion affects the flow field in this zone. The velocity with combustion is faster than that of the nonreacting flow because of the increased temperature and heat release.

25 February 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
QYQian Yao
Qian Yao
PLPeixing Li
Peixing Li
CRChaoqun Ren
Chaoqun Ren
CTChaowei Tang
Chaowei Tang
QQQiongyao Qin
Qiongyao Qin
WJWu Jin
Wu Jin
A reverse-flow combustor has a larger liner surface area due to airflow turning, which complicates flow and cooling control, particularly heat transfer efficiency. Effective heat management is essential for maintaining uniform temperature distribution and preventing thermal gradients. This study explores the impact of axial position and diameter of primary holes on thermal performance and flow dynamics. Results indicate that as the primary holes move toward the dome, the recirculation vortex size decreases, leading to insufficient fuel mixing, a reduction in the high-temperature area in the primary zone, and an increase in the high-temperature area of the middle zone. On the other hand, moving the primary holes downstream enhances fuel mixing, increasing high-temperature areas in the primary zone and reducing them in the middle and dilution zones, thus improving thermal boundary layers and convective heat transfer rates. When the primary hole is moved 10 mm downstream, outlet temperature improves significantly with an outlet temperature distribution factor (OTDF) of 0.21 and a radial temperature distribution factor (RTDF) of 0.16. Additionally, reducing the upper primary hole diameter strengthens jet deflection, improving fuel–gas mixing at the dome and heat transfer to the central region. With a 2.1 mm hole diameter, the temperature gradient decreases, resulting in an OTDF of 0.184 and RTDF of 0.15. Furthermore, as the momentum flux ratio increases, the jet penetration depth initially rises and then stabilizes. Momentum flux ratios between 10.6 and 15.1 significantly affect jet penetration, while further increases result in smaller fluctuations. Higher momentum flux ratios create localized high- and low-temperature zones, reducing outlet temperature distribution quality. The optimal momentum ratio for the reverse-flow combustor, ensuring effective jet penetration and better temperature distribution, is between 10.6 and 14.7, with a corresponding penetration depth of 34.3 mm to 35.1 mm. These findings offer valuable insights for improving reverse-flow combustor design and performance.

28 September 2022 in International Journal of Aerospace Engineering
Verified
Journal Article
Open access
PDF file
GHGe Hu
Ge Hu
JLJianzhong Li
Jianzhong Li
WJWu Jin
Wu Jin
JZJingzhou Zhang
Jingzhou Zhang
SGShibin Geng
Shibin Geng
The reverse-flow combustor is extensively applied in small engines due to its compact structure. The cold-state flow characteristics, the ignition process, and flame chemiluminescence characteristics of the reserve-flow combustor were investigated experimentally. Using the particle imaging velocimeter, the cold-state time-averaged flow fields at three different total pressure loss coefficients are examined. The ignition processes of the combustor, as well as flame characteristics during stable combustion at different equivalent ratios , are analyzed based on flame chemiluminescence imaging when is 3%. As increases from 1% to 5%, the flow field of the combustor remains almost unchanged while the flow velocity increases. For =3%, the ignition time drops from 26 ms to 16 ms with an increase of . In addition, the ignition performance is enhanced. Proportions of the T2 phase (quasi-stable phase) are 73%, 68%, and 66%, respectively, suggesting that the quasi-stable phase is the key to successful ignition. As increases, the flame becomes thinner and shorter. Furthermore, standard deviations of continuous image areas of and drop from 0.0143 and 0.0132 to 0.0115 and 0.0109, respectively, which indicates the enhancement of combustion stability. According to the brightness distributions of and along the axial direction of the combustor at different equivalent ratios, the production of is significantly affected by the temperature. It can be adopted as an important sign of heat release during combustion.

24 October 2025 in Energies
Verified
Journal Article
Open access
PDF file
JLJize Liang
Jize Liang
EGErlei Gong
Erlei Gong
JLJianzhong Li
Jianzhong Li
QYQian Yao
Qian Yao
WJWu Jin
Wu Jin
The non-uniform distribution of outlet parameters in a Radial Wave Rotor Combustor (RWRC) significantly impacts downstream component performance. This study aims to investigate the spatial-temporal characteristics of temperature and pressure at the RWRC outlet. Three-dimensional unsteady Reynolds-Averaged Navier–Stokes (RANS) simulations were coupled with a User-Defined Function (UDF) to efficiently model the combustion process. The Shear-Stress Transport (SST) k-ω turbulence model was employed. Quantitative metrics including Relative Standard Deviation (RSD) and Christiansen Uniformity Coefficient (CUC) were introduced to evaluate the non-uniformity. The results reveal significant temporal fluctuations and spatial non-uniformity in both temperature and pressure. At 3000 r/min, the average temperature fluctuation amplitude and uniformity coefficient are 0.38 and 0.9, respectively, while the pressure fluctuation amplitude reaches 0.44. Crucially, temperature distribution expands circumferentially with increasing speed, whereas pressure distribution remains locally concentrated and is less sensitive to speed variations. This study provides a quantitative assessment of outlet non-uniformity in RWRC, highlighting the distinct behaviors between temperature and pressure distributions. The findings offer critical insights for the design and optimization of wave rotors and their integration with downstream components.

22 November 2024 in Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy
Verified
Journal Article
Closed access
PDF file
XWXiaonong Wei
Xiaonong Wei
EGErlei Gong
Erlei Gong
WJWu Jin
Wu Jin
JLJianzhong Li
Jianzhong Li
RZRenchuan Zheng
Renchuan Zheng
ZFZhan Feng
Zhan Feng