Ultrafiltration membranes are often considered a highly efficient technique for purifying oily wastewater. The primary objective of this research was to improve the performance and antifouling properties of PLA/PBAT membranes used in oily wastewater treatment by incorporating banana peel (BP) nanoparticles. Various characterization techniques, including field emission scanning electron microscopy (FESEM), wettability analysis, pure water flux measurement, porosity assessment, tensile analysis, and FTIR analysis, were employed to describe the prepared membranes. The results of the FT-IR test revealed that BP nanoparticles were effectively integrated into the PLA/PBAT membrane matrix. The contact angle decreased from 73.7° for the pristine PLA/PBAT membrane to 38.99° for the membrane incorporating 0.05 wt.% BP-NPs, indicating that the nanoparticles enhanced the hydrophilic characteristics of the membranes. A similar trend was observed for the pure water flux of PLA/PBAT/BP membranes, suggesting that membranes with a BP-NP concentration of 0.05 weight percent exhibited the highest pure water flux. This improvement can be attributed to the synergistic effects of the nanoparticles. Additionally, the presence of BP-NPs enhanced the mechanical properties of the membranes. Finally, an ultrafiltration system using oily wastewater as feed was employed to evaluate the performance of the prepared membranes. The finding demonstrated that PLA/PBAT/BP membranes exhibited a higher flux and a greater oil removal efficiency of 105.3 L/m2h and 95.2% compared to neat PLA/PBAT membranes (62 L/m2h and 88%), respectively.
This study investigates the optimization of fabrication and operating parameters for poly(ether sulfone) (PES) ultrafiltration membranes embedded with Bismuth tungstate and multi-walled carbon nanotubes (MWCNTs) Bi2WO6/MWCNTs for the removal of dye pollutants from wastewater. Response surface methodology (RSM) coupled with Analysis of Variance (ANOVA) was employed to develop regression models for evaluating membrane performance in terms of dye rejection and permeate flux. A central composite design (CCD) was used to conduct a systematic series of ultrafiltration experiments. The effects of key variables, including Bi2WO6/MWCNTs loading (0–0.1 wt.%), operating pressure (5–9) bar, and methyl red (MR) dye concentration (50–150 ppm), on membrane separation performance were comprehensively examined. The developed models demonstrated strong statistical significance and accurately described the experimental data. Optimization results revealed that the operating parameters exerted a more pronounced influence on membrane performance than fabrication variables. The maximum MR rejection of 96.8457% was achieved at an optimal Bi2WO6/MWCNTs loading of 0.08 wt.%, dye concentration of 112.6 ppm, and operating pressure of 9 bar. Experimental validation confirmed the reliability and predictive capability of the proposed models. In order to provide high-performance membranes with enhanced permeability, antifouling resistance, and dye removal efficiency for useful wastewater treatment applications, this study attempts to optimize the operating and preparation parameters for adding Bi2WO6/MWCNT nanocomposites into PES membranes.