The environment and human health are greatly suffering as a result of pollution. The textile sector is a significant generator of dyes, which are colored chemicals that are among the most significant water pollutants. In order to produce and optimize green mixed matrix membranes (MMMs) for the treatment of wastewater discharged from the textile industry, propolis (bee glue) was used as an additive to improve the performance of the PES membrane. This work utilized analysis of variance (ANOVA) and response surface methodology (RSM) to optimize the ultrafiltration (UF) process for the treatment of wastewater contaminated with Congo red. Specifically, the primary and interrelated effects of three preparation and operating parameters, additive content, transmembrane pressure, dye feed concentration on the membrane permeate flux, and CR dye rejection using the PES/PRS membrane were examined to optimize the UF process. Transmembrane pressure (1–5 bar), dye concentration (100–300 ppm), and PRS NP content (0–88 mg) were among the factors examined. Optimization results showed that PES/PRS MMMs were the most efficient, with a dye rejection rate of 99.8% and a flux of 48.44 kg m−2 h−1, at a PRS content of 64.43 mg, operating pressure of 5 bar and CR dye feed concentration of 210.08 ppm. Overall, this research not only shows that innovative PES/PRS UF membranes have the potential to treat wastewater containing dyes very well, but it also offers a useful comprehension of the dye-rejection process, which may direct the logical design of UF membranes. This work showed that the PES/PRS membrane would be a viable option for wastewater industrial applications in terms of its CR dye removal effectiveness under ideal operating circumstances.
Rapid industrial development has led to the discharge of significant amounts of untreated industrial wastewater into the environment, resulting in substantial effects on natural ecosystems and human health. Consequently, there is a need to develop new environmentally friendly alternatives for water remediation. In this regard, chitosan (CS) aerogels possess high porosity, low density, and biodegradability, and act as effective sorbents for the removal of various ionic pollutants from water, air, and soil. The presence of numerous amino (–NH2) and hydroxyl (OH) groups enhances the adsorption of ionic pollutants via electrostatic interactions, hydrogen bonding, and chelation mechanisms. This review provides an overview of the use of chitosan-based aerogels as eco-friendly gels to remove different contaminants from water such as dyes, heavy metals, microorganisms, and pharmaceuticals, by improving the mechanical strength, decreasing hydrophilicity, and increasing acid stability. These improvements are accomplished using different modification methods, such as blending with nanofillers, chemical and/or ionic crosslinkers, and designing composite aerogels. The modified aerogel exhibits excellent adsorption ability against different contaminants, as well as antibacterial properties, making it promising candidates for a wide range of applications.
This study investigates the optimization of fabrication and operating parameters for poly(ether sulfone) (PES) ultrafiltration membranes embedded with Bismuth tungstate and multi-walled carbon nanotubes (MWCNTs) Bi2WO6/MWCNTs for the removal of dye pollutants from wastewater. Response surface methodology (RSM) coupled with Analysis of Variance (ANOVA) was employed to develop regression models for evaluating membrane performance in terms of dye rejection and permeate flux. A central composite design (CCD) was used to conduct a systematic series of ultrafiltration experiments. The effects of key variables, including Bi2WO6/MWCNTs loading (0–0.1 wt.%), operating pressure (5–9) bar, and methyl red (MR) dye concentration (50–150 ppm), on membrane separation performance were comprehensively examined. The developed models demonstrated strong statistical significance and accurately described the experimental data. Optimization results revealed that the operating parameters exerted a more pronounced influence on membrane performance than fabrication variables. The maximum MR rejection of 96.8457% was achieved at an optimal Bi2WO6/MWCNTs loading of 0.08 wt.%, dye concentration of 112.6 ppm, and operating pressure of 9 bar. Experimental validation confirmed the reliability and predictive capability of the proposed models. In order to provide high-performance membranes with enhanced permeability, antifouling resistance, and dye removal efficiency for useful wastewater treatment applications, this study attempts to optimize the operating and preparation parameters for adding Bi2WO6/MWCNT nanocomposites into PES membranes.
The current study offers a deeper understanding of the thermal behavior of AISI 420 stainless-steel drill bits during titanium alloy machining. It utilizes non-linear simulations with the finite element method (FEM) to analyze heat generation, accumulation, and dissipation. The FEM formulation displays the time-dependent temperatures for the tool and hole during the drilling process. The simulation was examined during drilling and subsequent stages, up to room temperature. The study explored a wide range of drill bit lengths (60–160 mm) and tool diameters (2–10 mm). Significant convergence of 4.1% was achieved when compared to infrared thermography data. Furthermore, increasing the tool length beyond 120 mm did not significantly increase the thermal effect. Moreover, increasing the tool diameter up to 10 mm also did not significantly increase the thermal efficiency compared to tool diameters between 2 and 5 mm based on a constant tool length. An exploratory data analysis (EDA) heatmap correlation matrix was used to examine the most efficient variables and the optimum tool geometry. The results obtained provide a clear understanding of the optimal geometry choice for steel drilling tools when used in drilling titanium alloys.
3 August 2026 in Advances in Science and Technology
This research presents a model for calculating the productivity of metal removal during external cylindrical grinding, taking into account the instability of the technological process during the workpiece operating cycle and during the processing of a set of products. The relationship between the productivity of the grinding process using CNC digital control systems and the cutting forces, the physical and mechanical properties of the machined material, the properties of the grinding stone, the rigidity of the technological system, cutting systems, the characteristics of layer removal in areas opposite the wheel rotation, the achieved machining accuracy, and other technological factors affecting the process.