This study evaluated the effect of precursor particle size and calcium hydroxide (CH) incorporation on the microstructure, compressive strength, and rheological properties of clay brick waste (BW)-based geopolymers. Rheological analyses were used to evaluate the fresh state of the geopolymers. XRD, SEM, and EDS analyses were performed to analyze the microstructure. The results showed that the particle size reduction in BW and the incorporation of CH significantly contributed to obtaining better compressive strength in the geopolymers. Furthermore, the particle size reduction decreased the yield stress, plastic viscosity, and hysteresis area of the geopolymers, while the incorporation of CH promoted the opposite effect. Increasing the CH incorporation content accelerated the geopolymerization reactions and reduced the workability of the geopolymers over time. However, since the milling process is costly, milling BW for 2 h was more efficient from a technical–economic point of view. In addition, the incorporation of CH not only promoted the early hardening of the geopolymers when necessary, but also contributed to the improvement of the compressive strength through matrix densification. Therefore, the results of this study show the definition of more efficient material proportions for geopolymers using waste as an aluminosilicate source.
1 January 2025 in Revista IBRACON de Estruturas e Materiais
This study investigated the effect of dolomitic lime incorporation on the microstructure and mechanical properties of metakaolin-based geopolymers activated by alkaline solution. Five geopolymer mixtures were prepared with the addition of 0.0%, 2.5%, 5.0%, 7.5%, and 10.0% dolomitic lime. The microstructure of the geopolymers was evaluated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction analyses (XRD). The compressive strength of the mixtures ranged between 53.2 and 63.0 MPa after 28 days of ambient curing. SEM/EDS analyses showed that the main phases formed were the N-A-S-H gel together with the C-A-S-H and N-M-A-S-H gels in the mixtures with dolomitic lime. In summary, the results showed that the incorporation of dolomitic lime can significantly improve the microstructure and properties of geopolymers.
15 October 2025 in Journal of Building Engineering