A compact isotope ratio laser spectrometry (IRLS) instrument was developed for simultaneous measurements of the D/H, ¹⁸O/¹⁶O and ¹⁷O/¹⁶O isotope ratios in water by laser absorption spectroscopy at 2.73 μm. Special attention is paid to the spectral data processing and implementation of a Kalman adaptive filtering to improve the measurement precision. Reduction of up to 3-fold in standard deviation in isotope ratio determination was obtained by the use of a Fourier filtering to remove undulation structure from spectrum baseline. Application of Kalman filtering enables isotope ratio measurement at 1 s time intervals with a precision (<1‰) better than that obtained by conventional 30 s averaging, while maintaining a fast system response. The implementation of the filter is described in detail and its effects on the accuracy and the precision of the isotope ratio measurements are investigated.

The real-time tracking of moving objects has extensive applications in various domains. Existing tracking methods typically utilize video image processing, but their performance is limited due to the high information throughput and computational requirements associated with processing continuous images. Additionally, imaging in certain spectral bands can be costly. This paper proposes a non-imaging real-time three-dimensional tracking technique for distant moving targets using single-pixel LiDAR. This novel approach involves compressing scene information from three-dimensional to one-dimensional space using spatial encoding modulation and then obtaining this information through single-pixel detection. A LiDAR system is constructed based on this method, where the peak position of the detected full-path one-dimensional echo signal is used to obtain the target distance, while the peak intensity is used to obtain the azimuth and pitch information of the moving target. The entire process requires minimal data collection and a low computational load, making it feasible for the real-time three-dimensional tracking of single or multiple moving targets. Outdoor experiments confirmed the efficacy of the proposed technology, achieving a distance accuracy of 0.45 m and an azimuth and pitch angle accuracy of approximately 0.03° in localizing and tracking a flying target at a distance of 3 km.

Atmospheric turbulence is a key factor contributing to data distortion in mid-to-long-range target observation tasks. Neural networks have become a powerful tool for dealing with such problems due to their strong ability to fit nonlinearities in the spatial domain. However, the degradation in data is not confined solely to the spatial domain but is also present in the frequency domain. In recent years, the academic community has come to recognize the significance of frequency domain information within neural networks. There remains a gap in research on how to combine dual-domain information to reconstruct high-quality images in the field of blind turbulence image restoration. Drawing upon the close association between spatial and frequency domain degradation information, we introduce a novel neural network architecture, termed Dual-Domain Removal Turbulence Network (DDRTNet), designed to improve the quality of reconstructed images. DDRTNet incorporates multiscale spatial and frequency domain attention mechanisms, combined with a dual-domain collaborative learning strategy, effectively integrating global and local information to achieve efficient restoration of atmospheric turbulence-degraded images. Experimental findings demonstrate significant advantages in performance for DDRTNet compared to existing methods, validating its effectiveness in the task of blind turbulence image restoration.

For ground-based lidars in atmospheric observation, their data acquisition unit and control unit usually work independently. They usually require the cooperation of large-volume, high-power-consumption Industrial Personal Computer (IPC). However, the space-borne lidar has high requirements on the stability and integration of the acquisition control system. In this paper, a new data acquisition and lidar control system (DALCS) was developed based on System-on-Chip Field-Programmable Gate Array (SoC FPGA) technology. It can be used in lidar systems with high repetition rate and photon-counting mode and has functions such as data storage, laser control, automatic collimation, wireless communication, and fault self-test. DALCS has two working modes: in online mode, the echo data collected by DALCS are transmitted to the computer for display in real-time and then stored with the current time as the file name; in offline mode, the data are stored in local non-volatile memory, which can be read remotely and can work autonomously when there is no IPC. The test results showed that in the frequency range of 0–70 M, the counting linearity of DALCS reached 0.9999, and the maximum relative error between the DALCS card and the standard signal source was 0.211%. The comparison results showed that the correlation coefficient between DALCS and MCS-PCI was as high as 0.99768. The DALCS was placed in a self-developed lidar sensor system for continuous observation, and the system worked stably under different weather conditions. The range-squared-corrected signal profiles obtained from the observations reflect the spatial and temporal distribution characteristics of aerosols and clouds well. This provides scheme verification and experimental support for the development of space-borne lidar data acquisition and control system.

Single-pixel imaging (SPI) is a new type of imaging technology that uses a non-scanning single-pixel detector to image objects and has important application prospects and value in many fields. Most of the modulators currently used in SPI systems are digital micromirror device (DMD) modulators, which use a higher frequency for binary modulation than other alternatives. When modulating grayscale information, the modulation frequency is significantly reduced. This paper conducts research on multiple discrete objects in a scene and proposes using binary patterns to locate and image these objects. Compared with the existing methods of using gray patterns to locate and image multiple objects, the method proposed in this paper is more suitable for DMD-type SPI systems and has wider applicability and greater prospects. The principle of the proposed method is introduced, and the effectiveness of the method is experimentally verified. The experimental results show that, compared to traditional SPI methods, the number of patterns required by the proposed method is reduced by more than 85%.

Cloud is an important factor that affects weather and climate, and the vertical distribution of cloud determines its role in the atmospheric radiation transfer process. In this paper, the characteristics of different cloud types and their vertical cloud base height distributions over Eastern China are investigated with a four-year 2B-CLDCLASS-LIDAR product. The intercomparison of cloud base height distribution from ground-based lidar, CloudSat and CALIPSO measurements was studied with observations over the Hefei and Jinhua areas. The 2B-CLDCLASS-LIDAR product has the potential to uncover geographical and seasonal changes in cloud base height distribution over the Hefei area and Jinhua area, which may be beneficial for local climate models, although the CPR on CloudSat suffers from surface clutter or blind-zones. The results show that for non-precipitation cloud over the defined region (Eastern China), the occurrence frequencies of altocumulus, stratocumulus, and cirrus clouds are 29.4%, 21.0%, and 18.9%, respectively. The vertical occurrence frequencies of their cloud base heights are 0.5–8.5 km, below 3.5 km, and 5.5–17.0 km. The precipitation clouds are dominated by nimbostratus (48.4%), cumulus (17.9%), and deep convective clouds (24.2%), and their cloud base heights are all below 3.0 km. The cloud base height distributions have large differences below 3 km between the satellite measurement and ground-based measurement over Hefei site. Between the Hefei site and Jinhua site, the difference in cloud base height distribution measured by ground-based lidar is in good agreement with that measured by satellite over their matched grid boxes. Over the Hefei site, the vertical occurrence frequencies of cloud base height measured by ground-based lidar are higher than the satellite measurement within 0–0.5 km during all the seasons. It is suggested that more cloudy days may result from the sufficient water vapor environment in Hefei. In summer, the occurrence frequency of the cloud base height distribution at a height of 0–2.0 km is lower than other seasons over Jinhua city, which may be associated with the local weather system. Over the Jinhua site, the difference in seasonal cloud base height distribution based on satellite is in good agreement with that based on ground-based lidar. However, it does not appear over Hefei site. Thus, a multi-platform observation of cloud base height seems to be one of the essential ways for improvement in the observation of cloud macroscopic properties.