Aims To evaluate tomato epiphyte lactic acid bacteria (LAB) hydrophobicity and auto‐aggregation as an indicator of bacteria adhesion to tomato. Likewise use LAB adhesion and co‐aggregation as mechanisms to antagonize pathogen attachment. Methods and Results Fifty‐four LAB were screened to evaluate their hydrophobic, auto‐ and co‐aggregative properties against Salmonella Typhimurium, Saintpaul, Montevideo and Escherichia coli O157:H7. Subsequently, tomato adhesion of Enterococcus faecium Col1‐1C, Weisella cibaria 11‐E‐2, and W. confusa Col 1‐13 with high, medium and low hydrophobicity and high co‐aggregation was investigated as well as their pathogen antagonism. Results indicate that bacteria hydrophobicity and auto‐aggregation correspond with LAB adhesion to tomato. Ent. faecium Col1‐1C interfered in most of the pathogen adhesion and micrographs reveled that such effect could be related to the inhibition of structures‐type biofilm on E. coli O157:H7 and the aggregate formation on Salmonella. Conclusions LAB hydrophobicity and auto‐aggregation can estimate bacteria adhesion to tomato and adhesive and co‐aggregative properties could serve as a tool to antagonize foodborne pathogens under specific conditions. Significance and Impact of Study This study evidence the interference of Ent. faecium Col1‐1C in E. coli O157:H7 biofilm formation and Salmonella colonization.

Biocomposites were fabricated utilizing polylactic acid (PLA) combined with native starch sourced from mountain’s yam (Dioscorea remotiflora Knuth), an underexplored tuber variety. Different starch compositions (7.5, 15.0, 22.5, and 30.0 wt.%) were blended with PLA in a batch mixer at 160 °C to produce PLA/starch biocomposites. The biocomposites were characterized by analyzing their morphology, particle size distribution, thermal, X-ray diffraction (XDR), mechanical, and dynamic mechanical (DMA) properties, water absorption behavior, and color. The results showed that the amylose content of Dioscorea remotiflora starch was 48.43 ± 1.4%, which corresponds to a high-amylose starch (>30% of amylose). Particle size analysis showed large z-average particle diameters (D_z0) of the starch granules (30.59 ± 3.44 μm). Scanning electron microscopy (SEM) images showed oval-shaped granules evenly distributed throughout the structure of the biocomposite, without observable agglomeration or damage to its structure. XDR and DMA analyses revealed an increase in the crystallinity of the biocomposites as the proportion of the starch increased. The tensile modulus (E) underwent a reduction, whereas the flexural modulus (E_flex) increased with the amount of starch incorporated. The biocomposites with the highest E_flex were those with a starch content of 22.5 wt.%, which increased by 8.7% compared to the neat PLA. The water absorption of the biocomposites demonstrated a higher uptake capacity as the starch content increased. The rate of water absorption in the biocomposites followed the principles of Fick’s Law. The novelty of this work lies in its offering an alternative for the use of high-amylose mountain’s yam starch to produce low-cost bioplastics for different applications.

Sustainable methods such as convective drying have regained interest in reducing the loss and waste of food produce. Combined with techniques like blanching and edible coatings, they could serve as useful tools in food processing development. Composite coatings comprising pectin, soy protein isolate, and xanthan gum were optimized using response surface methodology with the Box–Behnken design. This optimization aimed to investigate their effects on the moisture content, water activity, total color, and rehydration ratio of fresh and blanched chayote slices. Additionally, the study explored the modeling of the drying kinetics and sorption isotherms of chayote (Sechium edule) slices. Soy protein and xanthan gum were found to primarily influence the moisture content (ranging from 5.44% to 9.93%), and pectin influenced water activity (033 to 0.53) of the fresh-coated chayote, while pectin affected the a_w (2.13–8.28) and rehydration of the blanch-coated chayote. The optimized formulations for both fresh and blanched chayote were utilized to assess the drying kinetics behavior and sorption isotherms. The best fit (R²: 0.996 to 0.999) was achieved with the parabolic model for thin-layer materials. Furthermore, the sorption isotherms of chayote displayed a Type IV behavior, with the BET model being the most suitable for describing the sorption behavior of materials with low water activity. The predicted values offer valuable data for optimizing processing conditions to enhance the quality and stability of dried chayote.