This work reports on the effect of the heavy rare earth element Er on Nd–Fe–B magnets by using a simple Er₆₉Fe₃₁ alloy additive, which is much less expensive than Dy and Tb elements. It was found that the corrosion resistance was improved with a minimal reduction in magnetic properties by rationally controlling the Er₆₉Fe₃₁ addition content. The main reason is that Er element partially replaces the Nd element at the edge of the main phase grain to form an (Er,Nd)₂Fe₁₄B shell with low H_A, which leads to a decrease in coercivity. However, the improvement in the corrosion resistance is mainly due to the Er₆₉Fe₃₁ alloy addition, which slows down the corrosion rate. Simultaneously, an investigation was conducted into the different advantages that target magnets when subjected to diverse heat treatment methodologies. The above findings may lead to the development of applications for other rare earth elements, thereby accelerating the development of low-cost permanent magnets comparable to commercially available sintered Nd-Fe-B magnets.

Developing an environmentally friendly material with dual functionality of corrosion monitoring and inhibition is crucial for reducing economic losses. Herein, dual-function phytic acid carbon dots (PA-CDs) were prepared with a hydrothermal treatment method for corrosion monitoring and inhibition. The as-prepared PA-CDs exhibited a distinct color change from brown-yellow to wine-red immediately in the presence of OH⁻, and H⁺ can restore the color of the PA-CDs-OH⁻ system from wine-red to brown-yellow. Inspired by the above phenomenon, a visible RGB-based colorimetric sensor was fabricated by combining PA-CDs coatings with the self-made RGB-sensing device to detect OH⁻/H⁺ during metal corrosion. In addition, PA-CDs had excellent corrosion inhibitory properties for Q235 steel hanging sheets in hydrochloric acid solutions, and the corrosion inhibition efficiency reached 96.40%. The excellent corrosion monitoring and inhibition properties demonstrate the potential application of the PA-CDs in engineering practice.