Orchard thinning can avoid biennial bearing and improve fruit quality, which is a necessary agronomic section in orchard management. The existing methods of artificial fruit thinning and chemical spraying are no longer suitable for the development of modern agriculture. With the continuous acceleration of the construction process of modern orchards, blossom thinning mechanization has become an inevitable trend in the development of the orchard flower and fruit management. Based on relevant reports in the past 20 years, the paper discusses the current level of development of mechanized blossom thinning technologies and equipment in orchards from three aspects: mechanism research, machine development, and intelligent upgrading. Firstly, for thinning mechanism research, three directions were investigated: the rope flexible hitting force, thinning agronomic requirements, and the fruit tree growth model between thinning and fruit yields. Secondly, for marketable machine developments, two types of machines were investigated: the hand-held thinner and tractor-mounted thinner. The hand-held thinner is mainly suitable for traditional old orchards with a messy canopy structure, especially in the interior and top of the canopy. The tractor-mounted thinner is mainly suitable for orchards with the same crown structure, such as the hedge type, trunk type, and V-type. Thirdly, for equipment intelligent upgrading, the research of the intelligent detection algorithm for inflorescence on the fruit tree was investigated, for species including the apple, pear, citrus, grape, litchi, mango, and apricot. Finally, combining the advantages and disadvantages of the research, the authors propose thoughts and prospects, which can provide a reference for the design and applications of orchard mechanized blossom thinning.

As a key component of fertilization equipment, the fertilizer discharger has an important impact on the accuracy of the amount of fertilizer applied during the fertilization process. Countries around the world have been advocating for reducing the use of chemical fertilizers and improving fertilizer utilization, and researchers have also conducted in-depth research on precision fertilizer devices. In order to further improve the precision of dosing and distribution devices for fertilizers, in this study, four types of fertilizer dischargers (spiral fertilizer dischargers, groove wheel fertilizer dischargers, disc fertilizer dischargers, and air-feed fertilizer dischargers) which are currently commonly used are thoroughly analyzed. The operating principle and performance characteristics of the fertilizer dischargers are elaborated upon, and the current research status of their structure and working parameter optimization are discussed and summarized. Overall, the research of Chinese researchers is mainly described. The problems existing in research on the precise fertilizer discharge of fertilizer dischargers are pointed out, and the future development trend is predicted, aiming to provide a beneficial reference for improving the technical level of precise fertilizer discharge.

To reduce pesticide pollution and promote sustainable agricultural development in China, we designed a pilot-scale biofilter system to treat residual imidacloprid wastewater in an orchard. The biofilter system demonstrated a high rate of removal of imidacloprid from the biodegradation wastewater, with removal rates from the outlet exceeding 99% at different concentrations of pesticides. Among environmental factors, imidacloprid concentration at the inlet and biomixture significantly affected the activity of imidacloprid-degrading bacteria. The dominant microbial communities during the stable operation of the biofilter system included Firmicutes, Actinobacteria, Proteobacteria, and Bacteroidetes at the phylum level and Bacillus, Methylobacter, and unclassified_f__Microbacteriaceae at the genus level. In future initiatives to improve biofilter performance and applicability, increasing attention should be paid to the dominant microbial communities, the number of biofilter units, and important environmental factors. Orchard workers in China should improve the existing treatment of residual pesticide wastewater to mitigate agricultural non-point source pollution.

In addressing the challenges of high energy consumption and low efficiency in fertilization borehole drilling for clayey soils in southern orchards, this study utilizes the Discrete Element Method to establish a simulation model for clayey soils. Through this approach, we identify an optimal set of operational parameters that significantly reduces energy consumption. By utilizing simulation technology to model the drilling process, we analyzed the impact of rotation speed and feed rate on the torque and resistance of the drilling apparatus. Initially, this paper describes field measurements of particle parameters in soils from southern orchards. Subsequently, utilizing the Discrete Element Method and particle contact theory, we established a simulation model to represent the interactions between soil and soil, as well as soil and auger in the soil environment of the southern region. For the Southern orchard clay with a moisture content of 16.8% and a measured angle of repose of 35.55°, parameter calibration was performed. The contact model “Hertz-Mindlin with Johnson-Kendall-Roberts” was selected in EDEM. Using Design Expert, a regression model variance analysis was applied to the discrete element model parameters, leading to the determination of the optimal values for significant soil model parameters. The soil JKR surface energy is 5.85 J·m⁻², with a soil–soil restitution coefficient of 0.65 and a soil–steel static friction coefficient of 0.5. Subsequently, discrete element simulation experiments on the drilling apparatus were conducted in EDEM, considering various rotation speeds and feed rates. The simulation analysis indicates that the torque consistently increases with higher rotation speeds, with a maximum relative error of 7%. The torque initially rises from zero to a maximum value, then gradually decreases to a low value, followed by a rapid increase to a higher value, and finally drops back down. This cycle repeats in the observed pattern. The total force experienced reaches its minimum average value of 200 N at a feed rate of 0.05 m/s. Simulation test results indicate that, among the three forces acting on the auger (vertical resistance, horizontal resistance, and lateral resistance), vertical resistance is the primary factor contributing to power consumption. As the rotation speed increases, the maximum value of vertical resistance continues to rise, while horizontal resistance and lateral resistance exhibit a declining trend. As the feed rate increases, the maximum values of resistance in all three directions also increase. When the feed rate exceeds 0.05 m/s, the maximum lateral resistance experiences a sharp increase. Through comprehensive analysis, the optimal operational parameters for borehole fertilization are determined to be a rotation speed of 100 r·min⁻¹ and a feed rate of 0.05 m/s. The aim of this study is to reduce the energy consumption of borehole fertilization operations, minimize carbon emissions, and promote the sustainable development of orchard production.