Pesticide application by unmanned agricultural aerial vehicles (UAVs) has rapidly developed in China and other Asian counties. Currently, tank-mix spray adjuvants are usually added into pesticide solutions to reduce spray drift and facilitate droplet deposition and control efficacy. The currently used tank-mix adjuvants are all derived from conventional ground sprays, and their mechanisms of action in aerial applications are still unclear. In order to clarify the spraying characteristics and control efficacy of those adjuvants in aerial sprays, the performances of various types of tank-mix adjuvants were compared by analyzing droplet spectrum, drift potential index (DIX) in a wind tunnel, field deposition and control efficacy on wheat rust and aphids. The atomization results showed that the addition of adjuvants could change the droplet spectrum of liquid, and the results suggest that droplet size is an effective indicator of spray drift potential. In the field application, the meteorological conditions are complex and uncontrollable, and the effects of adjuvants on droplet deposition and distribution were not significant. Compared with the control solution, there was no significant difference in the deposition amount of each adjuvant solution, and the CVs of deposition were higher than 30%. Adding adjuvants to the spray solution can significantly improve the control efficacy of pesticides on wheat aphids and rust and also prolong the duration of the pesticide. Our results suggest that tank-mix adjuvants should be added when UAVs are used for aerial application. This study can be used as a reference to the research and development or selection of adjuvants in aerial sprays of UAVs.

Orchard thinning can avoid biennial bearing and improve fruit quality, which is a necessary agronomic section in orchard management. The existing methods of artificial fruit thinning and chemical spraying are no longer suitable for the development of modern agriculture. With the continuous acceleration of the construction process of modern orchards, blossom thinning mechanization has become an inevitable trend in the development of the orchard flower and fruit management. Based on relevant reports in the past 20 years, the paper discusses the current level of development of mechanized blossom thinning technologies and equipment in orchards from three aspects: mechanism research, machine development, and intelligent upgrading. Firstly, for thinning mechanism research, three directions were investigated: the rope flexible hitting force, thinning agronomic requirements, and the fruit tree growth model between thinning and fruit yields. Secondly, for marketable machine developments, two types of machines were investigated: the hand-held thinner and tractor-mounted thinner. The hand-held thinner is mainly suitable for traditional old orchards with a messy canopy structure, especially in the interior and top of the canopy. The tractor-mounted thinner is mainly suitable for orchards with the same crown structure, such as the hedge type, trunk type, and V-type. Thirdly, for equipment intelligent upgrading, the research of the intelligent detection algorithm for inflorescence on the fruit tree was investigated, for species including the apple, pear, citrus, grape, litchi, mango, and apricot. Finally, combining the advantages and disadvantages of the research, the authors propose thoughts and prospects, which can provide a reference for the design and applications of orchard mechanized blossom thinning.

Diseases and pests are important factors in vegetable cultivation; they not only affect the growth and appearance of vegetables but also affect the yield and quality. The disease and pest control of vegetables is dominated by chemical sprays, for now. As a result, the excessive use of pesticides has been a crucial factor of pesticides’ non-point source pollution, and it is also the main cause of excessive pesticide residues in vegetables. Therefore, the design of efficient plant protection machinery and technology has become an urgent demand in order to ensure the quality and safety of vegetables. In this review, the machinery and technologies for vegetable protection are introduced from the aspects of chemical control and physical control. In the aspect of chemical control, handheld sprayers, self-propelled or track sprayers, fixed-pipe spray systems, vertical and horizontal boom sprayers, unmanned aerial vehicles (UAVs) and vegetable seed treatment techniques are introduced. In the aspect of physical control, soil physical disinfection, pest trapping technologies and ozone sterilizers are introduced. Finally, the existing problems and perspectives of pesticide application sprayers and physical control equipment for vegetables are summarized. This paper can provide references for vegetable growers and researchers.

Air-assisted sprayers are the mainstream orchard plant protection machinery in China. During the usage of sprayers, the pesticide droplets carried by strong air jets from sprayers enter into the target canopy. Therefore, the distribution of airflow field in the canopy has significant influence on the spatial movement of the droplets and the adhesion and penetration of the droplets inside the canopy. To enhance the working performance of sprayers, it is imperative to study their use in tree canopies. Based on computational fluid dynamics (CFD), the k-ε turbulence model, and the SIMPLE algorithm, a 3D simulated model of the spatial distribution of the airflow field in and around the tree canopy was established based on the porous model in this paper. The model was used to simulate and calculate the air field distribution of an air-assisted orchard sprayer under different operating parameters. The results showed that the optimal operation effect was achieved when the driving speed and the air speed of the fan outlet were 1 m/s and 20 m/s, respectively, while the air speed in the canopy was not less than 2 m/s. The 36 points measured in the canopy were compared with the simulated results through field experiments. It showed that average relative error between the measured and simulated values was 13.85%, and the overall goodness-of-fit was 0.97656. The model accurately simulated the airflow distribution in the canopy and provided a basis for optimizing the operating parameters of the air-assisted sprayers in orchards.

Advances in CFD-based fluid computational dynamics for fruit tree model construction method and airflow regulation equipment