Planning of a fracture reduction is important in order to reduce the surgery time, with the consequent improvement of the recovery process. There are no fully automatic methods that solve an adequate fracture reduction without the intervention of a specialist. Usually there are parameters that must be supervised or adjusted by the specialist, in order to obtain a satisfactory reduction. Furthermore, most of the studies in the literature focus on a certain type of bone and area on it. This paper presents an approach that tries to reduce to some extent the intervention of the specialist, so that it can be closer to an automatic approach. The proposed method can be applied to a wide variety of bones and areas, based on the identification of the complete fracture zone and the use of an ICP algorithm modified to work with the distance between fragments. The cases in which it has been tested are clinical cases of real fractures obtained from CT scan. This method allows working with a wide range of fractures, as well as complex fractures or deformed fragments. Unfortunately, all possible cases and situations could not be obtained and proved, but the method can be successfully applied to cases that meet a set of characteristics. The proposed technique has been validated by experts, both visually and empirically, using a framework based on virtual reality (VR). This VR framework has allowed comparing the reduction performed by the method with a reduction made virtually by specialists. This technique has also been compared with other existing techniques, obtaining a significant improvement over these.
The increase in life expectancy combined with greater bone fragility over the years is causing a rise in the bone fracture cases. Femur fractures are the most important due to their high mortality rate. This multidisciplinary work is carried out in this context and focuses on the experimental reproduction of human femur fractures by compression. We describe a sequence of steps supervised by orthopaedic surgeons for the correct arrangement of specimens on the system set up to perform the experiment. The device applies force by compression until the human bone is fractured. All tests performed have been monitored and evaluated from different knowledge perspectives. The results obtained have demonstrated the repeatability of the fracture type in a controlled environment as well as identifying the main features involved in this process. In addition, the fractured bones have been digitized to analyze the fracture zone to recreate and evaluate future simulations.
1 July 2022 in Computer Methods and Programs in Biomedicine
Obtaining bone models that represent certain types of fractures is limited by the need for such fractures to occur in real life and to be processed from medical images. This work aims to propose a method that starts from the design of specific fracture patterns in order to be projected on 3D geometric bone models, being prepared for their subsequent geometric fracturing. The process of projecting expert-generated fracture patterns has been approached in such a way that they contain geometrical and topological information for the subsequent fracture of the triangle mesh representing the bone model, giving information about the validity of the fracture pattern due to the design process, the validation performed, and the relationships between the fracture lines. Different 3D models of long bones have been used (femur, humerus, ulna and fibula). Also, different types of fracture patterns have been created. These patterns have been used to obtain their projection on three-dimensional bones. In this study, an expert validation of the fracture patterns projected on the bone models is performed. A forensic validation of the fracture patterns used as starting point for the projection is also performed for cases in which this fracture is produced by impact, for which there is scientific evidence based on forensic analysis. This validation also supports the experts, giving them the necessary feedback to complete or modify their fracture patterns according to criteria analyzed from a forensic point of view. The patterns fit the bone models correctly, despite the irregularities of the bone models, and correspond to the expected projection. In addition, it provides us with a clear line of work, by using the topological information of the fracture pattern and the bone model, which allows us to establish a consistent basis for future guided fractures.
Fracture pattern acquisition and representation in human bones play a crucial role in medical simulation, diagnostics, and treatment planning. This article presents a comprehensive review of methodologies employed in acquiring and representing bone fracture patterns. Several techniques, including segmentation algorithms, curvature analysis, and deep learning-based approaches, are reviewed to determine their effectiveness in accurately identifying fracture zones. Additionally, diverse methods for representing fracture patterns are evaluated. The challenges inherent in detecting accurate fracture zones from medical images, the complexities arising from multifragmentary fractures, and the need to automate fracture reduction processes are elucidated. A detailed analysis of the suitability of each representation method for specific medical applications, such as simulation systems, surgical interventions, and educational purposes, is provided. The study explores insights from a broad spectrum of research articles, encompassing diverse methodologies and perspectives. This review elucidates potential directions for future research and contributes to advancements in comprehending the acquisition and representation of fracture patterns in human bone.
12 January 2021 in Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization
Fracturing of osseous models is a field that allows to obtain advances in computer-assisted medical simulations, as well as to prototype fragile objects as is the case of bones. This field of study includes the use of physical features of bones. Not all fracturing methods are valid with osseous models, due to the importance of considering the hierarchical structure of the bones. In this work, we focus on the study of bone fractures at the macroscale level and on obtaining fractures with a realistic appearance. Therefore, a tool has been developed that allows the fracture of osseous models, obtained through a 3D scanning process, by the use of patterns and physics. The different approaches for the fracturing of osseous models are also shown, and discussed the need to obtain more information about the fracturing process.
24 April 2024 in International Journal of Computational Intelligence Systems
The acquisition of bone models to perform simulations is a complex and expensive process. The hierarchical structure of bones is very complex, so that studies are mainly focused on the larger scales of bones. The objective of this work is to perform a fracture simulation at the microscale level. For this purpose, the first part of the process focuses on segmenting a bone model and selecting an area of it to generate a representation of the microstructures that make up the bone tissue from a microscopic point of view. The second part is dedicated to carry out a fracture simulation in the microscopic bone model. The developed algorithm follows a statistical approach and solves the main problems of the traditional approach (FEM) to perform a bone fracture simulation. The method returns the path that a fracture follows and demonstrates how bone structures affect fracture growth. The parameters used are configurable and can be adapted for specific cases. In addition, users can reproduce as many clinical cases as desired within seconds without have to manually segment images obtained from a microscope. The data obtained may be exported to obtain synthetic images that could be used to generate datasets for machine learning tasks or other purposes.