Integrating the graded index (GRIN) waveguide with the 2-D inversely-tapered waveguide, a new design of spot size converter (SSC) has been proposed to couple the light beam between the cleaved single-mode fiber (SMF) and the silicon (Si) wire waveguide on the silicon-on-insulator (SOI) platform. The device demonstrates a low coupling loss of 0.27 dB when it is coupled to a cleaved SMF. The polarization-dependent loss (PDL) is less than 0.25 dB, and the 1-dB alignment tolerance is about −2.0~2.0 µm for both vertical and horizontal directions. At the same time, the starting tip width of the tapered waveguide is kept at the level of the lithography limitation at the current commercial silicon photonics fab. This integrated SSC could be an improved design for reducing the coupling loss between the cleaved SMF and the Si waveguide.

A 2 μm wavelength band spot size converter (SSC) based on a trident structure is proposed, which is coupled to a lensed fiber with a mode field diameter of 5 μm. The cross-section of the first segment of the tapered waveguide structure in the trident structure is designed as a right-angled trapezoidal shape, which can further improve the performance of the SSC. The coupling loss of the SSC is less than 0.9 dB in the wavelength range of 1.95~2.05 μm simulated by FDTD. According to the experimental results, the lowest coupling loss of the SSC is 1.425 dB/facet at 2 μm, which is close to the simulation result. The device is compatible with the CMOS process and can provide a good reference for the development of 2 μm wavelength band integrated photonics.