Biometric measurement of the anterior segment is of great importance for the ophthalmology, human eye modeling, contact lens fitting, intraocular lens design, etc. This paper serves as a comprehensive review on the historical development and basic principles of the technologies for measuring the geometric profiles of the anterior segment. Both the advantages and drawbacks of the current technologies are illustrated. For in vivo measurement of the anterior segment, there are two main challenges that need to be addressed to achieve high speed, fine resolution, and large range imaging. One is the motion artefacts caused by the inevitable and random human eye movement. The other is the serious multiple scattering effects in intraocular turbid media. The future research perspectives are also outlined in this paper.

Structured-light vision methods are widely employed for three-dimensional reconstruction. As a typical structured light pattern, grid pattern is extensively applied in single-shot three-dimensional reconstruction. The uniqueness of the grid feature retrieval is critical to the reconstruction. Most methods using grid pattern utilize the epipolar constraint to retrieve the correspondence. However, the low calibration accuracy of the camera–projector stereo system may impact the correspondence retrieval. An approach using grid pattern-based structured-light vision method is proposed. The grid pattern-based structured-light model was combined with the camera model and the multiple light plane equations. An effective extraction method of the grid stripe features was investigated. The system calibration strategy, based on coplanar constraint, is presented. The experimental setup consisted of a camera and an LED projector. Experiments were carried out to verify the accuracy of the proposed method.

Color phase-shifting fringe projection profilometry is one of the single-shot three-dimensional shape measurement techniques. The color crosstalk of the projector-camera system yields undesired phase errors when using phase-shifting method. In this paper, a color crosstalk compensation method based on phase correction matrix is proposed. In this method, the phase correction matrix is established to compensate the deviations between the actual phase-shift values in the acquired fringes and the standard ones in the ideal fringes. Only two fringe patterns are utilized to obtain the phase correction matrix. The quadratic equations for calculating the actual phase-shift values of the fringes in the three color channels are derived. The actual phase-shift values and the corresponding standard ones are employed to form the equilibrium equations for computing the phase correction coefficients in the matrix. Experimental results demonstrate the feasibility of the proposed method and it can effectively reduce the induced overall phase error caused by the color crosstalk.

For some measurement and detection applications based on video (sequence images), if the exposure time of camera is not suitable with the motion speed of the photographed target, fuzzy edges will be produced in the image, and some poor lighting condition will aggravate this edge blur phenomena. Especially, the existence of noise in industrial field environment makes the extraction of fuzzy edges become a more difficult problem when analyzing the posture of a high-speed moving target. Because noise and edge are always both the kind of high-frequency information, it is difficult to make trade-offs only by frequency bands. In this paper, a noise-tolerant edge detection method based on the correlation relationship between layers of wavelet transform coefficients is proposed. The goal of the paper is not to recover a clean image from a noisy observation, but to make a trade-off judgment for noise and edge signal directly according to the characteristics of wavelet transform coefficients, to realize the extraction of edge information from a noisy image directly. According to the wavelet coefficients tree and the Lipschitz exponent property of noise, the idea of neural network activation function is adopted to design the activation judgment method of wavelet coefficients. Then the significant wavelet coefficients can be retained. At the same time, the non-significant coefficients were removed according to the method of judgment of isolated coefficients. On the other hand, based on the design of Daubechies orthogonal compactly-supported wavelet filter, rational coefficients wavelet filters can be designed by increasing free variables. By reducing the vanishing moments of wavelet filters, more high-frequency information can be retained in the wavelet transform fields, which is benefit to the application of edge detection. For a noisy image of high-speed moving targets with fuzzy edges, by using the length 8-4 rational coefficients biorthogonal wavelet filters and the algorithm proposed in this paper, edge information could be detected clearly. Results of multiple groups of comparative experiments have shown that the edge detection effect of the proposed algorithm in this paper has the obvious superiority.

Camera calibration is a key problem for 3D reconstruction in computer vision. Existing calibration methods, such as traditional, active, and self-calibration, all need to solve the internal and external parameters of the imaging system to clarify the image-object mapping relationship. The artificial neural network, which is based on connectionist architecture, provides a novel idea for the calibration of nonlinear mapping vision systems. It can learn the image-object mapping relationship from some sample points without considering too many uncertain factors in the middle. This paper discusses the learning ability. A binocular stereo-vision mapping model is used as the learning model to explore the ability of image-object mapping for artificial neural networks. This paper constructs sample libraries by pixel and world coordinates of checkerboard corners, builds the artificial neural network, and, through the training samples and test samples prediction, verifies the learning performance of the network. Furthermore, by the laser scanning binocular vision device constructed in the authors’ laboratory and trained-well network, the 3D point cloud reconstruction of a physical target is performed. The experimental results show that the artificial neural network can learn the image-object mapping relationship well and more effectively avoid the impact of lens distortion and achieve more accurate nonlinear mapping at the edge of the image. When the X and Y coordinates are in the range of 100 mm and the Z coordinates are in the range of a 1000 mm, the absolute error rarely exceeds 2.5 mm, and the relative error is in the level of 10 − 3 ; for 1000 mm distance measurement, the standard deviation does not exceed 1.5 mm. Network parameter selection experiments show that, for image-object mapping, a three-layer network and increasing the number of hidden layer’s nodes can improve the training time more significantly.

Real-time measurement of the thickness and group refractive index is crucial for semiconductor devices. In this paper, we proposed a fast synchronous method for measuring the thickness and group refractive index distribution of solid plates based on line-field dispersive interferometry. The proposed method measured the line-field distribution in an illuminated region through a single step. A low-cost spectrometer calibration method using an eight-channel dense wavelength division multiplexer was developed for verification. The line-field distribution of a three-step silicon wafer was successfully measured within 3.3 ms. The combined uncertainties for the geometrical thickness and group refractive index were <50 nm and 4 × 10⁻⁴, respectively.