The separation and recovery of key nuclides such as uranium and plutonium from effluents related to nuclear industry is of great significance for alleviating the shortage of nuclear energy resources and protecting the environment and human health. However, the high temperature, strong acidity and radioactivity of the nuclear effluents pose a severe challenge to the separation materials used in such conditions. The diversity of structure, flexibility of design, and excellent physicochemical stability of covalent organic framework materials (COFs) provide the possibility for the directional design and preparation of adsorbents for use under harsh conditions. Herein, three COFs with similar structure, different pore sizes and connecting modules were synthesized. The ingenious structure predesign enables Dp-COF to have three carboxyl groups oriented toward the pore center and laid out in appropriate spatial positions, which builds hydrogen-bonding bridges between carboxycarbonyl and hydroxyl groups, and thus constructs for the first time a unique COF material with a double-ring pore. The inner pore size of the “double-ring” is slightly larger than the diameter of uranyl hydrate, which leads to a size-matching adsorption of uranium by Dp-COF, thus greatly reducing the effect of protonation. Even in the simulated spent fuel reprocessing liquid with pH = 1.0, the adsorption capacity of Dp-COF for uranium can reach 66.3 mg g−1, and the adsorption capacity reaches 317.3 mg g−1 at pH = 4.5, which is very rare among the reported COFs. More excitingly, the removal rate for uranium reaches up to an unprecedented 99.8% due to the size-matching effect, more than any analogous adsorbents. This study not only proposes new ideas for the design and regulation of the microscopic configuration of COF materials, but also provides an alternative approach for the preparation of efficient uranium adsorbents.
P,P-bis (2-oxooxazolidin-3-yl)-N-(3-(triethoxysilyl)propyl)phosphinic amide (APTES-BOP)-modified SBA-15 (SBA-15-BOP) was prepared by a post-synthesis grafting method for the removal of anionic azo dyes from aqueous solutions. The properties of the prepared adsorbent were characterized by PXRD, FT-IR, SEM, TEM, nitrogen sorption, and elemental analysis. Adsorption equilibrium and adsorption kinetic studies demonstrated that the experimental data fitted well with the Langmuir isotherm model and pseudo-second-order model. According to Langmuir fitting, SBA-15-BOP showed high adsorption capacity for CR and RR2 dyes, with the maximum adsorption capacities of 518.1 mg g−1 and 253.8 mg g−1, respectively. The thermodynamic study indicated that the adsorption processes of CR and RR2 dyes on SBA-15-BOP were spontaneous and exothermal. The prepared SBA-15-BOP can be a promising adsorbent for the removal of anionic dyes from aqueous solutions.
1 October 2021 in Journal of Analytical Atomic Spectrometry
The monitoring of Pu isotopes in environmental samples was essential for radioactive assessment and tracing the geochemical processes. Triple quadrupole inductively coupled plasma mass spectrometry (ICP-MS/MS) has shown strong ability for long-half lived radionuclide analysis with respect to interference removal capability. In this study, we explored the ability of ICP-MS/MS for the ultra-trace determination of Pu isotopes in environmental samples. The Pu sensitivity was improved more than 10 times by using an APEX-Ω high efficiency sample introduction system. The absolute detection limits for 239Pu and 240Pu were about 0.13 fg (0.0003 mBq) and 0.08 fg (0.0007 mBq), respectively. After the introduction of NH3 and He into the reaction cell with appropriate gas flow rates, the U hydride removal capability (UH+/U+: 1.2 × 10−6) was improved, while the Pu sensitivity (7400 cps ppt−1) was still remarkable. A simple one stage chromatographic separation method with a suitable Pu eluent was established for the separation of Pu from soil and sediment samples. The sample matrix effect and the UH+ interference were eliminated with the coupling of the separation procedure and the ICP-MS/MS detection method. Several reference materials were analyzed for the validation of the method. The results revealed that our method was suitable for the determination of Pu isotopes in environmental samples.