The holographic signal-processing method for a single vector scalar receiver (VSR) in the high-frequency band in shallow water is developed in the paper. The aim of this paper is to present the results of the theoretical analysis, numerical modeling, and experimental verification of holographic signal processing for a noise source by the VSR. The developed method is based on the formation of the 2D interferogram and 2D hologram of a noise source in a shallow-water waveguide. The 2D interferograms and 2D holograms for different channels of the VSR (P sound pressure and and vibration velocity components) are considered. It is shown that the 2D interferogram consists of parallel interference fingers in the presence of a moving noise source. As a result, the 2D hologram contains focal points located on a straight line, and the angular distribution of the holograms has the main extreme value. It is shown in the paper that the holographic signal-processing method allows detecting the source, estimating the source bearing, and filtering the useful signal from the noise. The results of the source detection, source bearing estimation, and noise filtering are presented within the framework of experimental data processing and numerical modeling.
A method for designing hydroacoustic navigation systems with ultrashort baseline (HANS USBL) for underwater robots is proposed. The possibility of their application for navigation support of underwater robots is shown. Estimation of the antennas and navigation signals used to determine their potential accuracy is presented. It is noted that high accuracy of angle measurements is attainable in the case of sparse antennas. A mathematical model for calculation of the random error component for various multielement antennas is described. The sources of systematic errors in real antennas are analyzed. The procedures and techniques for calibration of the HANS USBL accuracy based on accurate range measurement, as well as on the data of the onboard navigation system of an underwater robot and ship navigation equipment are discussed. An example of processing real data obtained during the system operation in deep sea is given. A conclusion is made about the feasibility of designing high-accurate HANS USBL using circular axisymmetric antennas with a small number of elements and statistical methods of signal processing.
The paper studies the use of multi-frequency signals in underwater acoustic positioning systems with an ultrashort baseline. Reception of a navigation acoustic signal by a circular array with linear dimensions equal to several wavelengths of the signal average frequency is analyzed. A model for measuring the time delays with array elements by determining the full phases at each frequency of a multi-frequency signal is proposed. It is shown that the accuracy of the angular position measurements of a navigating object can be improved.
1 January 2022 in Podvodnye issledovaniia i robototehnika
A technique for holographic processing of a noise signal from an underwater source is presented, which makes it possible to estimate its maximum detection range. An algorithm for determining parameters is presented holographic processing, realizing the maximum detection range. The results are given numerical experiment to determine the maximum detection range of a hybrid AUV in the “underwater glider” mode. As a receiving system, a single receiver and a linear antenna.
Acoustic monitoring of low-noise underwater sources is challenging for autonomous underwater vehicles (AUVs) in shallow water, where waveguide variability and platform self-noise reduce source detectability. This paper presents the design concept of a hybrid autonomous underwater vehicle (HAUV) for passive acoustic monitoring of such sources. The platform combines conventional AUV propulsion for deployment and transit, buoyancy-driven glider motion, and a low-noise receiving mode in which propulsion is switched off, the vehicle is anchored near the seabed, and a vector–scalar receiver (VSR) acquires the acoustic field. Functional and structural models specify the vehicle architecture, mode transitions, buoyancy and stability control, anchoring, navigation and communication, and onboard hydroacoustic processing. Holographic signal processing (HSP) transforms the frequency–time interferogram of the received field into a hologram in which the source energy is concentrated in a small region, whereas incoherent noise is spread over the hologram plane. This enables estimation of source kinematic parameters and reduces the data transmitted to a remote control center. The present work is limited to a conceptual system specification. The next steps toward implementation are hydrodynamic modeling and validation, measurement of platform self-noise, experimental validation of the hydroacoustic subsystem, embedded real-time benchmarking, and full-scale testing of the integrated platform.