Human exposure to Volatile Organic Compounds (VOCs) and their presence in indoor and working environments is recognized as a serious health risk, causing impairments of varying severities. Different detecting systems able to monitor VOCs are available in the market; however, they have significant limitations for both sensitivity and chemical discrimination capability. During the last years we studied systematically the use of Fourier Transform Infrared (FTIR) spectroscopy as an alternative, powerful tool for quantifying VOCs in air. We calibrated the method for a set of compounds (styrene, acetone, ethanol and isopropanol) by using both laboratory and portable infrared spectrometers. The aim was to develop a new, and highly sensitive sensor system for VOCs monitoring. In this paper, we improved the setup performance, testing the feasibility of using a multipass cell with the aim of extending the sensitivity of our system down to the part per million (ppm) level. Considering that multipass cells are now also available for portable instruments, this study opens the road for the design of new high-resolution devices for environmental monitoring.

We report on the far-infrared, temperature-dependent optical properties of a CrI${}_3$ transition metal halide single crystal, a van der Waals ferromagnet (FM) with a Curie temperature of 61 K. In addition to the expected phonon modes determined by the crystalline symmetry, the optical reflectance and transmittance spectra of CrI${}_3$ single crystals show many other excitations as a function of temperature as a consequence of the combination of a strong lattice anharmonicity and spin–phonon coupling. This complex vibrational spectrum highlights the presence of entangled interactions among the different degrees of freedom in CrI${}_3$.

Two-dimensional materials-based ultrafast spintronics are expected to surpass conventional data storage and manipulation technologies, that are now reaching their fundamental limits. The newly discovered van der Waals (VdW) magnets provide a new platform for ultrafast spintronics since their magnetic and electrical properties can be tuned by many external factors, such as strain, voltage, magnetic field, or light absorption for instance. Here, we report on the direct relationship between magnetic order and Terahertz (THz) electrodynamics in Fe_nGeTe₂ (n = 3, 5) (FGT) films after being illuminated by a femtosecond optical pulse, studying their ultrafast THz response as a function of the optical pump-THz probe temporal delay. In Fe₅GeTe₂, we find clear evidence that light-induced electronic excitations directly influence THz electrodynamics similarly to a demagnetization process, contrasting with the effects observed in Fe₃GeTe₂, which are characterized by a thermal energy transfer among electrons, magnons, and phonons. We address these effects as a function of the pump fluence and pump-probe delay, and by tuning the temperature across the magnetic ordering Curie temperature, highlighting the microscopic mechanisms describing the out-of-equilibrium evolution of the THz conductivity. Finally, we find evidence for the incoherent-coherent crossover predicted by the Kondo-Ising scenario in Fe₃GeTe₂ and successfully simulate its light-driven electrodynamics through a three-temperature model. As indicated by these results, FGT surpasses conventional metals in terms of modulating their properties using an optical lever.

Optical spectroscopy experiments on an important representative of kagome metals, FeSn, revealed the emergence of Dirac electrons dominating the low energy electrodynamics of the system, providing evidence for quasi-2D Dirac bulk states.

Copper-based alloys designed to combine high electronic and thermal conductivities with high mechanical strength find a wide range of applications in different fields. Among the principal representatives, strongly diluted CuAg alloys are of particular interest as innovative materials for the realization of accelerating structures when the use of high-gradient fields requires increasingly high mechanical and thermal performances to overcome the limitations induced by breakdown phenomena. This work reports the production and optical characterization of CuAg crystals at low Ag concentrations, from 0.028% wt to 0.1% wt, which guarantee solid solution hardening while preserving the exceptional conductivity of Cu. By means of Fourier Transform Infrared (FTIR) micro-spectroscopy experiments, the low-energy electrodynamics of the alloys are compared with that of pure Cu, highlighting the complete indistinguishability in terms of electronic transport for such low concentrations. The optical data are further supported by Raman micro-spectroscopy and SEM microscopy analyses, allowing the demonstration of the full homogeneity and complete solubility of solid Ag in copper at those concentrations. Together with the solid solution hardening deriving from the alloying process, these results support the advantage of strongly diluted CuAg alloys over conventional materials for their application in particle accelerators.