Moein Younesi Heravi

Mr. Moein Younesi Heravi

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 August 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Youjin JangYoujin Jang
Youjin Jang
Inbae JeongInbae Jeong
Inbae Jeong
MHMoein Younesi Heravi
Moein Younesi Heravi
SSSajib Sarkar
Sajib Sarkar
HSHyunKyu Shin
HyunKyu Shin
YAYonghan Ahn
Yonghan Ahn
As the use of construction robots continues to increase, ensuring safety and productivity while working alongside human workers becomes crucial. To prevent collisions, robots must recognize human behavior in close proximity. However, single, or RGB-depth cameras have limitations, such as detection failure, sensor malfunction, occlusions, unconstrained lighting, and motion blur. Therefore, this study proposes a multiple-camera approach for human activity recognition during human–robot collaborative activities in construction. The proposed approach employs a particle filter, to estimate the 3D human pose by fusing 2D joint locations extracted from multiple cameras and applies long short-term memory network (LSTM) to recognize ten activities associated with human and robot collaboration tasks in construction. The study compared the performance of human activity recognition models using one, two, three, and four cameras. Results showed that using multiple cameras enhances recognition performance, providing a more accurate and reliable means of identifying and differentiating between various activities. The results of this study are expected to contribute to the advancement of human activity recognition and utilization in human–robot collaboration in construction.

25 April 2024 in Buildings
Verified
Journal Article
Open access
PDF file
MHMoein Younesi Heravi
Moein Younesi Heravi
IDIsrat Sharmin Dola
Israt Sharmin Dola
Youjin JangYoujin Jang
Youjin Jang
Inbae JeongInbae Jeong
Inbae Jeong
Effective monitoring of road fixtures is essential for urban safety and functionality. However, traditional inspections are time-consuming, costly, and error prone, while current automated solutions struggle with high initial setup costs, limited flexibility preventing wide adaptation, and reliance on centralized processing that can delay response times. This study introduces an edge AI-based remote road fixture monitoring system which automatically and continuously updates the information of the road digital twin (DT). The main component is a small-sized edge device consisting of a camera, GPS, and IMU sensors designed to be installed in typical cars. The device captures images, detects the fixture, and estimates their location by employing deep learning and feature matching. This information is transmitted to a dedicated cloud server and represented on a user-friendly user interface. Experiments were conducted to test the system’s performance. The results showed that the device could successfully detect the fixture and estimate their global coordinates. Outputs were marked and shown on the road DT, proving the integrated and smooth operation of the whole system. The proposed Edge AI device demonstrated that it could significantly reduce the data size by 80–84% compared to traditional methods. With a satisfactory object detection accuracy of 65%, the system effectively identifies traffic poles, stop signs, and streetlights, integrating these findings into a digital twin for real-time monitoring. The proposed system improves road monitoring by cutting down on maintenance and emergency response times, increasing the ease of data use, and offering a foundation for an overview of urban road fixtures’ current state. However, the system’s reliance on the quality of data collected under varying environmental conditions suggests potential improvements for consistent performance across diverse scenarios.

6 August 2024 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Open access
ADAyenew Yihune Demeke
Ayenew Yihune Demeke
MHMoein Younesi Heravi
Moein Younesi Heravi
IDIsrat Sharmin Dola
Israt Sharmin Dola
Youjin JangYoujin Jang
Youjin Jang
Chau LeChau Le
Chau Le
DWDanling Wang
Danling Wang
Highway work zones are critical areas where accidents frequently occur, often because of the proximity of workers to heavy machinery and ongoing traffic. With technological advancements in sensor technologies and the Internet of Things, promising solutions are emerging to address these safety concerns. This paper provides a systematic review of existing studies on the application of sensor technologies in enhancing highway work zone safety, particularly in preventing intrusion and proximity hazards. Following the PRISMA (preferred reporting items for systematic reviews and meta-analyses) protocol, the review examines a broad spectrum of publications on various sensor technologies, including GPS (global positioning system), radar, laser, infrared, radio-frequency identification, Bluetooth, ultrasonic, and infrared sensors, detailing their application in reducing intrusion and proximity incidents. The review also assesses these technologies in relation to their accuracy, range, power consumption, cost, and user-friendliness, with a specific emphasis on their suitability for highway work zones. The findings highlighted the potential of sensor technologies to significantly enhance work zone safety. As there are a wide range of sensor technologies to choose from, the review also revealed that the selection of sensors for a particular application needs careful consideration of pertinent factors. Finally, although sensor technologies offer promising solutions for enhancing highway work zone safety, their effective implementation requires comprehensive consideration of various factors beyond their technological capabilities, including developing integrated, cost-effective, user-friendly, and secure systems, and creating regulatory frameworks to support the rapid development of these technologies.

27 July 2025 in Proceedings of the 37th International Symposium on Automation and Robotics in Construction (isarc)
Verified
Conference Paper
Open access
PDF file
MHMoein Younesi Heravi
Moein Younesi Heravi
Youjin JangYoujin Jang
Youjin Jang
Inbae JeongInbae Jeong
Inbae Jeong
IDIsrat Sharmin Dola
Israt Sharmin Dola
The real-time estimation of human activity level in indoor environments is crucial for thermal comfort prediction and optimizing HVAC systems, as well as supporting health monitoring and ergonomic assessments. Existing methods typically categorize activities into predefined types and therefore are not efficient for new activities. Furthermore, the transition between activities is not captured in these classification methods. To address these limitations, we propose a novel Activity Intensity Score (AIS) framework that provides a continuous, non-intrusive assessment of human activity intensity. The proposed AIS framework uses kinematic parameters derived from video-based pose estimation to calculate a dynamic intensity score. Key kinematic parameters, such as angular speed, angular acceleration, range of motion, movement frequency, and rotational energy, are extracted from pose landmarks using MediaPipe. These parameters are then normalized and combined to generate a continuous AIS that reflects real-time variations in movement intensity. The proposed approach was validated through controlled experiments with participants performing activities of varying intensities, including low (e.g., sitting), moderate (e.g., walking), and high (e.g., jumping jacks). Results showed that the AIS effectively distinguishes between different activity intensities, with higher AIS values corresponding to more intensive activities. The proposed method addresses the need for a more granular understanding of activity levels beyond simple categorical classification. This research contributes to real-time activity estimation, which has applications in optimizing indoor environmental conditions, health monitoring, and dynamic ergonomic assessments.

1 August 2025 in Journal of Construction Engineering and Management
Verified
Journal Article
Closed access
MHMoein Younesi Heravi
Moein Younesi Heravi
Youjin JangYoujin Jang
Youjin Jang
HCHardik Chauhan
Hardik Chauhan

27 July 2025 in Proceedings of the 37th International Symposium on Automation and Robotics in Construction (isarc)
Verified
Conference Paper
Open access
PDF file
IDIsrat Sharmin Dola
Israt Sharmin Dola
Inbae JeongInbae Jeong
Inbae Jeong
Youjin JangYoujin Jang
Youjin Jang
MHMoein Younesi Heravi
Moein Younesi Heravi
3D human joint estimation is essential for enabling effective human-robot interaction in construction automation, facilitating precise monitoring of worker movements to enhance safety, ergonomics, and operational efficiency. Vision-based systems utilizing multi-camera setups offer diverse perspectives to address challenges such as occlusions, projection ambiguities, and sensor noise. However, these systems depend heavily on accurate camera calibration to align views and synchronize measurements. Traditional manual calibration methods are timeconsuming, labor-intensive, and prone to human error, making them unsuitable for dynamic construction sites where frequent camera repositioning is required due to shifting conditions and tasks. This study proposes a novel framework that leverages external marker detection for real-time, automated camera calibration, eliminating the need for manual intervention. This approach significantly reduces setup time, minimizes errors, and ensures reliable performance in rapidly changing environments. Furthermore, the framework integrates an Extended Kalman Filter (EKF) to fuse 2D joint locations from multiple cameras, effectively handling sensor noise and the nonlinear nature of human motion. By combining marker-based calibration with EKF-based fusion, the proposed framework delivers a robust and automated solution for 3D human joint estimation, enhancing safety, efficiency, and adaptability in construction automation applications.