The COVID-19 pandemic has highlighted the critical need for scalable, rapid, and cost-effective diagnostic solutions, especially in resource-limited settings. In this study, we developed a sustainable magnetic electrochemical biosensor for the mass testing of SARS-CoV-2, emphasizing affordability, environmental impact reduction, and clinical applicability. By leveraging recycled materials from spent batteries and plastics, we achieved a circular economy-based fabrication process with a recyclability rate of 98.5%. The biosensor employs MnFe2O4 nanoparticles functionalized with anti-SARS-CoV-2 antibodies, integrated into a 3D-printed electrochemical device for decentralized testing. Advanced characterization confirmed the biosensor's robust performance, including high sensitivity (LOD: 3.46 pg mL-1) and specificity, with results demonstrating a 95% correlation to RT-PCR gold standard testing. The cost of materials used per biosensor test is only USD 0.2, making it highly affordable and suitable for large-scale production using additive manufacturing. Key features include simple preparation, rapid response, and reusability, making it ideal for point-of-care diagnostics. Beyond COVID-19, this platform's modularity allows for adaptation to other viral diseases, offering a versatile solution to global diagnostic challenges. This work highlights the potential of integrating electrochemical sensing with sustainable practices to address healthcare inequities and reduce environmental impact.
26 August 2024 in ACS Applied Materials & Interfaces
Additive manufacturing (AM) is emerging as an eco-friendly method for minimizing waste, as the demand for responsive materials in IoT and Industry 4.0 is on the rise. Magnetoactive composites, which are manufactured through AM, facilitate nonintrusive remote sensing and actuation. Printed magnetoelectric composites are an innovative method that utilizes the synergies between magnetic and electric properties. The study of magnetoelectric effects, including the recently validated piezoinductive effect, demonstrates the generation of electric voltage through external AC and DC magnetic fields. This shift in magnetic sensors, utilizing piezoinductive effect of the piezoelectric polymer poly(vinylidene fluoride), PVDF, eliminates the need for magnetic fillers in printed devices, aligning with sustainability principles, essential for the deployment of IoT and Industry 4.0. The achieved sensitivity surpasses other studies by 100 times, showcasing linear outputs for both applied AC and DC magnetic fields. Additionally, the sensor capitalizes on the linear phase shift of the generated signal with an applied DC magnetic field, an unprecedented effect. Thus, this work introduces a remarkable magnetoactive device with a sensitivity of ST = 95.1 ± 0.9 μV Oe-1 mT-1, a significantly improved performance compared to magnetoelectric devices using polymer composites. As a functional proof of concept of the developed system, a magnetic position sensor has been demonstrated.
Next-generation high-performance polymers require consideration as sustainable solutions. Here, to satisfy these criteria, we propose to combine high-performance styrenic block copolymers, a class of thermoplastic elastomer, with cellulose derivatives as a reinforcing agent with the aim of maintaining and/or improving structural and surface properties. A great advantage of the proposed blends is, besides their biocompatibility, a decrease in environmental impact due to blending with a natural polymer. Particularly, we focus on identifying the effect of different blending compounds and blend ratios on the morphological, structural, thermal, mechanical, electrical and cytotoxic characteristics of materials. This research provides, together with novel material formulations, practical guidelines for the design and fabrication of next-generation sustainable high-performance polymers.
This work presents the development and characterization of 3D‐printed mechanically driven giant magnetoresistance (GMR) sensors using self‐compliant spring structures and piezoresistive materials. Fused deposition modeling 3D printing has been employed to fabricate sensors from conductive and magnetic polylactic acid composite materials, enabling low‐cost and highly customizable designs. Three sensor topologies were fabricated to optimize magnetoresistive and piezoresistive responses. Electromechanical and magnetic characterizations showed that the self‐compliant spring arm width influences the device mechanical stiffness, piezoresistive response, and magnetoresistive sensitivity. Sensitivities up to 0.34%/mm for piezoresistive sensors with a 3‐mm arm under direct mechanical deformation and 0.77%/mT for the magnetoresistive sensors with a 1‐mm arm were obtained, with a response 10 times higher in sensitivity than other printed spin‐dependent GMR devices in the literature. The applicability was demonstrated in pressure sensing and noncontact magnetic position detection, integrated in a Bluetooth low energy application. The sensors showcased reliable performance under dynamic conditions at a frequency range of 0.1, 0.25, and 0.5 Hz, highlighting their potential in automotive, robotics, and consumer electronics. This work establishes self‐compliant structural design as an effective tool for fabricating mechanically driven GMR‐like sensors using low‐cost, additive manufacturing techniques, allowing further integration of geometry‐driven devices into increasingly interconnected IoT networks.
A multiscale understanding of the structure of ionogels – nanoparticle‐free polymer composites incorporating ionic liquids – is essential for enhancing their macroscopic functional properties and unlocking their potential in critical applications such as energy storage, sensing, and actuation. We establish a complete picture of the nano‐ and microstructuration of an ionic liquid within the matrix of a practically relevant electroactive copolymer poly(vinylidenefluoride‐ co ‐trifluoroethylene), by combining neutron scattering with cryogenic scanning electron tomography assisted by focused ion beam milling and cryogenic transmission electron microscopy with elemental analysis. We show that the ionic liquid is primarily located in the polymer amorphous phase and forms nanostructures with 10–12 nm size. It does not penetrate into the crystalline lamellae or the polymer amorphous phase confined between them, and it does not affect the polymer degree of crystallinity nor its complete crystallization in the highly electroactive β‐phase. Saturation of the unconfined amorphous phase with ionic liquid is identified as the key factor enabling high ionic conductivity while preserving mechanical integrity. At high ionic liquid concentrations, its excess microphase‐separates during the composite processing and accumulates in predominantly interconnected micrometer‐sized pores, providing the magnetoelectric response and further increasing the ionic conductivity.