Zhixuan Ma

Prof. Zhixuan Ma


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 March 2024 in Metals
Verified
Journal Article
Open access
PDF file
HCHualin Cai
Hualin Cai
ZMZhixuan Ma
Zhixuan Ma
Jiayi ZhangJiayi Zhang
Jiayi Zhang
LQLiang Qi
Liang Qi
JHJinbing Hu
Jinbing Hu
JZJiayi Zhou
Jiayi Zhou
Vacuum electron-beam welding (EBW) was used to join the precipitation-strengthened GH4169 superalloy and a new nickel-based superalloy IC10 to fabricate the turbine blade discs. In this study, a solid solution (1050 °C/2 h for GH4169 and 1150 °C/2 h for IC10) and different heat-exposure temperatures (650 °C, 750 °C, 950 °C and 1050 °C/200 h, respectively) were used to study the high-temperature tensile properties and microstructure evolution of welded joints; meanwhile, the formation and evolution of the second phases of the joints were analyzed. After EBW, the welded joint exhibited a typical nail morphology, and the fusion zone (FZ) consisted of columnar and cellular structures. During the solidification process of the molten pool, Mo elements are enriched in the dendrites and inter-dendrites, and that of Nb and Ti elements was enriched in the dendrites, which lead to forming a non-uniform distribution of Laves eutectic and MC carbides in the FZ. The microhardness of the FZ gradually increased during thermal exposure at 650 °C and reached 300–320 HV, and the γ′ and γ″ phases were gradually precipitated with size of about 50 nm. Meanwhile, the microhardness of the FZ decreased to 260–280 HV at 750 °C, and the higher temperature resulted in the coarsening of the γ″ phase (with a final size of about 100 nm) and the formation of the acicular δ-phase. At 950 °C and 1050 °C, the microhardness of FZ decreased sharply, reaching up to 170~190 HV and 160~180 HV, respectively. Moreover, the Laves eutectic and MC carbides are dissolved to a greater extent without the formation of γ″ and δ phases; as a result, the absent of γ″ and δ phases are attributed to the significant improvement of segregation at higher temperatures.

15 July 2024 in Materials
Verified
Journal Article
Open access
PDF file
HCHualin Cai
Hualin Cai
ZMZhixuan Ma
Zhixuan Ma
Jiayi ZhangJiayi Zhang
Jiayi Zhang
JHJinbing Hu
Jinbing Hu
LQLiang Qi
Liang Qi
HWHebin Wang
Hebin Wang
Nickel-based superalloys have been widely used in the aerospace industry, and regulating the reinforcing phases is the key to improving the high-temperature strength of the alloy. In this study, a series of aging treatments (650 °C, 750 °C, 850 °C and 950 °C for 8 h) were designed to study different thermal deformation behaviors and microstructure evolutions for a novel nickel-based superalloy. Among the aged samples, the 950 °C aged sample achieved the peak stress of ~323 MPa during the thermal deformation and the highest microhardness of ~315 HV after thermal compression, which were the greatest differences compared to before deformation. In addition, the grains of the 950 °C sample exhibit deformed fibrous shapes, and the grain orientation is isotropic, while the other samples exhibited isotropy. In the 850 °C and 950 °C high-temperature aging samples, the γ′ precipitate (about 20 nm in size) is gradually precipitated, which inhibits the movement of dislocation in the grain during compression, thus inhibiting the occurrence of dynamic recrystallization and improving the high-temperature mechanical properties of the alloy.