Lignocellulose is the most abundant biomass on Earth, with an estimated 181.5 billion tonnes produced annually. Of the 8.2 billion tonnes that are currently used, about 7 billion tonnes are produced from dedicated agricultural, grass and forest land and another 1.2 billion tonnes stem from agricultural residues. Economic and environmentally efficient pathways for production and utilization of lignocellulose for chemical products and energy are needed to expand the bioeconomy. This opinion paper arose from the research network “Lignocellulose as new resource platform for novel materials and products” funded by the German federal state of Baden‐Württemberg and summarizes original research presented in this special issue. It first discusses how the supply of lignocellulosic biomass can be organized sustainably and suggests that perennial biomass crops (PBC) are likely to play an important role in future regional biomass supply to European lignocellulosic biorefineries. Dedicated PBC production has the advantage of delivering biomass with reliable quantity and quality. The tailoring of PBC quality through crop breeding and management can support the integration of lignocellulosic value chains. Two biorefinery concepts using lignocellulosic biomass are then compared and discussed: the syngas biorefinery and the lignocellulosic biorefinery. Syngas biorefineries are less sensitive to biomass qualities and are technically relatively advanced, but require high investments and large‐scale facilities to be economically feasible. Lignocellulosic biorefineries require multiple processing steps to separate the recalcitrant lignin from cellulose and hemicellulose and convert the intermediates into valuable products. The refining processes for high‐quality lignin and hemicellulose fractions still need to be further developed. A concept of a modular lignocellulosic biorefinery is presented that could be flexibly adapted for a range of feedstock and products by combining appropriate technologies either at the same location or in a decentralized form.

Chitin, and especially its deacetylated variant chitosan, has many applications, e.g. as carrier material for pharmaceutical drugs or as a flocculant in wastewater treatment. Despite its versatility and accessibility, chitin, the second most abundant polysaccharide on Earth, has so far been commercially extracted only from crustaceans and to a minor extent from fungi. Insects are a viable alternative source of chitin, but they have not been exploited in the past due to limited availability. Today however, for the sustainable production of animal feed, insect farming is being developed substantially. The availability of large quantities of insect biomass and chitin‐rich side products such as exuviae and exoskeletons has been increasing. This review provides an overview of recently published studies of chitin extraction from insects, its subsequent conversion into chitosan and the primary analytical methods used to characterize insect‐based chitin and chitosan. We have discovered a large number of research articles published over the past 20 years, confirming the increased attention being received by chitin and chitosan production from insects. Despite numerous publications, we identified several knowledge gaps, such as a lack of data concerning chitin purification degree and chitosan yield. Furthermore, analytical methods used to obtain physicochemical characteristics, structural information and chemical composition meet basic qualitative requirements but do not satisfy the need for a more quantitative evaluation. Despite the current shortcomings that need to be overcome, this review presents encouraging data on the use of insects as an alternative source of chitin and chitosan in the future. © 2020 The Authors. Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI).

Chitin and its derivatives are attracting great interest in cosmetic and cosmeceutical fields, thanks to their antioxidant and antimicrobial properties, as well as their biocompatibility and biodegradability. The classical source of chitin, crustacean waste, is no longer sustainable and fungi, a possible alternative, have not been exploited at an industrial scale yet. On the contrary, the breeding of bioconverting insects, especially of the Diptera Hermetia illucens, is becoming increasingly popular worldwide. Therefore, their exoskeletons, consisting of chitin as a major component, represent a waste stream of facilities that could be exploited for many applications. Insect chitin, indeed, suggests its application in the same fields as the crustacean biopolymer, because of its comparable commercial characteristics. This review reports several cosmetic and cosmeceutical applications based on chitin and its derivatives. In this context, chitin nanofibers and nanofibrils, produced from crustacean waste, have proved to be excellent cosmeceutical active compounds and carriers of active ingredients in personal care. Consequently, the insect-based chitin, its derivatives and their complexes with hyaluronic acid and lignin, as well as with other chitin-derived compounds, may be considered a new appropriate potential polymer to be used in cosmetic and cosmeceutical fields.

Purpose: Chitin purification from remains (pupal exuviae after metamorphosis to adult flies) of Hermetia illucens farming was optimized performing demineralization, deproteinization and bleaching under different conditions. The optimal parameters to obtain high-purity chitin were determined. Methods: Dried and ground pupal exuviae, whose composition was initially determined, were demineralized using six different acids. Proteins were removed with a NaOH treatment in which temperature, molarity and duration were varied in a randomized experiment. Bleaching was carried out testing ten different chemicals, including NaOCl, H₂O₂, solvent mixtures and enzymes. The efficiency of each step was determined to assess the optimal conditions for each of them. The resulting chitin was subjected to spectroscopic characterization. Results: The highest demineralization efficiency (90%) was achieved using 0.5 M formic acid for 2 h at 40 °C, confirming the validity of organic acids as a more sustainable alternative to inorganic acids. The treatment with 1.25 M NaOH at 90 °C for 4 h showed the highest deproteinization efficiency, removing 96% of the proteins. Temperature and NaOH concentration were the significant parameters for deproteinization efficiency. The most efficient bleaching treatment was with 6% NaOCl at 60 °C for 1 h (67% efficiency). H₂O₂ could also be a valid alternative to avoid environmental risk related to chlorine-containing compounds. At the end of the purification process 17% of the original biomass was retained with a chitin content of 85%, corresponding to a chitin yield of 14% related to the initial biomass. Solid-state nuclear magnetic resonance showed that the purified chitin had a degree of acetylation of 96% and X-ray powder diffraction gave a crystallinity index of 74%. Conclusion: This investigation shows an optimized method for extraction of high-purity chitin from H. illucens pupal exuviae, supporting the validity of insect-farming remains as source of this versatile biopolymer. Graphical