Microplastics (MPs), defined as plastic particles measuring less than 5 mm, are considered an emerging pollutant. Their presence in the water cycle and their interaction with ecological processes pose a significant environmental threat. As groundwater (GW) represents the primary source of drinking water, monitoring MPs in GW and investigating their potential sources and pathways is of urgent importance. This article offers a comprehensive overview of the primary contamination pathways of MPs from surface water, seawater, and soil into the GW. Moreover, it presents an examination of the occurrence of MPs in GW and identifies the challenges associated with their monitoring in GW. This study also discusses the difficulties associated with comparing research results related to MPs in GW, as well as indicating the need for implementing standardised techniques for their sampling and detection. On the basis of our experience and the literature review, we highlight the importance of understanding the specific hydrogeological and hydrogeographic conditions, collecting representative samples, using sampling devices with comparable specifications and comparable laboratory techniques for MP identification, and preventing contamination at all stages of the monitoring process. This review offers valuable insights and practical guidelines on how to improve the reliability and comparability of results between studies monitoring MPs in GW.

Waste management in Europe has improved in recent years, reducing the amount of waste disposed at landfills. However, there are still many landfills in the countries. It is well known that landfills that do not have measures in place to control leachate entering groundwater can contaminate groundwater long after the landfill is closed. Collecting monitoring results from all landfills allows permitting and management agencies to improve action plans. This relies on a synoptic risk assessment that allows prioritization and milestones to be set for required actions. The developed method of synoptic risk assessment is based on a conceptual model of the landfill and the results of chemical groundwater monitoring tested at 69 landfills in Slovenia. The study confirms that most landfills have a direct or indirect impact on groundwater quality. All landfills were classified into three priority classes on the basis of the synoptic risk assessment. The results show that a total of 24 landfills have a clearly pronounced impact on groundwater. A total of 31 landfills have a less pronounced impact due to the favorable natural attenuation capacity of the soil or the technically appropriate design of the landfill itself. A total of 14 landfills have a less pronounced or negligible impact on groundwater.

With increasing exploitation of groundwater resources and implementation of various activities in their recharge areas, it is vital to conduct a comprehensive assessment of aquifers to ensure their conservation and sustainable management. In the present study, we used a comprehensive approach to conceptualise and identify the functioning of two connected aquifer systems in north-eastern Slovenia: the Quaternary porous aquifers Dravsko polje and Ptujsko polje. The study presents the conceptual models of both aquifers and their interconnectedness using separate mathematical-numerical models with the aim of ensuring an integrated management of these alluvial aquifer systems. It also highlights the importance of understanding connections between such systems for simulating groundwater flow and transport of different contaminants. To describe the entire aquifer system, the study defines its three essential elements: the geometry of the aquifers, their recharge by precipitation, and other boundary conditions. The geometry of the Quaternary aquifers was defined using Sequential Indicator Simulation (SIS) with the ESRI’s ArcMap software. Next, LIDAR was used for determining their surface geometry. The hydrogeologic model was designed using the Groundwater Modelling System (GMS) developed by AQUAVEO. We used the MODFLOW 2000 calculation method based on the finite difference method (FDM). The model was calibrated with the PEST module, which was used to calibrate hydraulic conductivity and hydraulic heads between the measured and modelled data. Finally, the model was validated using the Nash–Sutcliffe (NSE) efficiency coefficient. In addition, the model results estimated using the PEST tool were validated with the hydraulic conductivities determined at the pumping sites (pumping tests), each belonging to water protection zones that define the maximum travel time of the particles. This was performed using the MODPATH method. The paper also presents the possibility of modelling heterogeneous but interdependent aquifers in a groundwater body. Modelling the connection between the two aquifers, which are the most important ones in the region, is essential for a comprehensive management of the entire system of water resources. The models allow for a better understanding of groundwater flow in both aquifers. Moreover, their interconnectedness will be used for further studies in this field, as well as for integrated water management.

Legislation addressing the quality of groundwater and increasing concerns over public health calls for the development of analytical methods that can produce accurate and precise results at the ppt level. Passive sampling has been recognised as a helpful tool in identifying various organic pollutants in groundwater, even when their presence had not yet been identified through conventional groundwater quality monitoring. The article presents an analytical method involving a simple and cost-effective passive sampling device using Zorflex^® activated carbon fibres (ACFs) for the qualitative monitoring of a broad range of organic pollutants in water in a single run. The applicability of the method developed was tested in three hydrogeological studies. In the first case, we present a non-targeted qualitative screening and a list of 892 different contaminants detected in the groundwater in Slovenia. In the second case, we discuss the presence and origin of organic compounds in the groundwater from a pilot area of the urban aquifer, Ljubljansko polje. The third case presents a comparison of results between passive and grab sampling. Passive sampling with ACFs confirmed the presence of a pollutant, even when it had not been previously detected through a quantitative method.