The spectral bidirectional reflectance distribution function (BRDF) of metals plays an important role in industrial processing involving laser-surface interaction. In particular, in laser metal machining, absorbance is strongly dependent on the radiation incidence angle as well as on finishing and contamination grade of the surface, and in turn it can considerably affect processing results. Very recently, laser radiation is also used to structure metallic surfaces, in order to produce many particular optical effects, ranging from a high level polishing to angular color shifting. Of course, full knowledge of the spectral BRDF of these structured layers makes it possible to infer reflectance or color for any irradiation and viewing angles. In this paper, we present Vis-NIR spectral BRDF measurements of laser-polished metallic, opaque, flat samples commonly employed in such applications. The resulting optical properties seem to be dependent on the atmospheric composition during the polishing process in addition to the roughness. The measurements are carried out with a Perkin Elmer Lambda 950 double-beam spectrophotometer, equipped with the Absolute Reflectance/Transmittance Analyzer (ARTA) motorized goniometer.
1 January 2017 in Journal of Physics: Conference Series
In this paper we present new experimental results on local heat transfer characteristics of a forced air-flow through a 12-mm-height, rectangular channel of 1:10 aspect ratio, with square-cross-section ribs mounted onto the lower surface. Data are collected on a completely redesigned test section. Specifically, the electric heater is made of very thin copper tracks, in direct contact with the air flow and covering at 97.5% the channel lower surface to guarantee a very uniform heat flux. The copper tracks are laminated onto a 2-mm thick board of FR-4 glass epoxy to provide negligible heat conduction inside the plate and heat losses from its sides. Finally, the channel walls are in XPS and, into the upper one, a double glazing consisting of two 120 mm x 120 mm Germanium windows is mounted to allow optical access to the IR camera and to reduce local heat dispersions. Data here presented refer to convection over 4 mm x 2 mm ribs in transverse configuration for Reynolds numbers, based on the duct hydraulic diameter, ranging between 700 and 8000. Preliminary tests show how the new apparatus has significantly improved the quality, the ease and the quickness of the measurements.
This paper details the thermal design and the mechanical assessment procedures for an additively manufactured AlSi10Mg heat pipe, incorporating lattice structures as a wick for the cooling of a satellite power unit’s electronics. To optimize thermal performance, various lattice structures were experimentally investigated, focusing on properties, such as capillary rise, permeability, and heat removal capabilities. The best-performing lattice structure was further analyzed for its static and fatigue properties. A fatigue life model, comprising the experimental data on the lattice and SN diagrams for the bulk material obtained from propagation law, is presented. A sample representative of the heat pipe was designed and experimentally tested to validate the predictive capability of the fatigue life model and to assess the structural integrity of the heat pipe against the loading conditions experienced during a space launch. The heat pipe design demonstrated the ability to remove 24 W at 0 $$^\circ$$ inclination, a near-isothermal functioning at 18 W up to an inclination of 15 $$^\circ$$ angle, corresponding to a 34 mm height counter-gravity. The component demonstrated the capability to withstand the stresses resulting from nine repetitions of the space launch, confirming the model’s predicting capability. Graphical
1 September 2016 in Journal of Physics: Conference Series
The investigation of ribbed surfaces for the enhancement of heat transfer in forced convection allowed to observe that different geometries may lead to comparable performances. Due to the lack of an underlying structure of the data, a novel method for data clustering is introduced here, to assess to what extent comparable performances can be achieved using different rib geometries. The clustering method is an agglomerative technique, based on the inclusion of each configuration in another ones bounding box, whose size depends dynamically on the Nusselt number and the pumping power. The method is applied to a large database experimentally obtained at ThermALab of Politecnico di Milano, in order to identify the Nusselt number and the friction factor for diverse-rib configurations in a large-aspect ratio channel with low-Reynolds flows. The clusters are determined, and the resulting families of configurations are used to assess the possible effects of the rib geometry on the thermal and fluid-dynamic performances. The clustering analysis results suggest interesting considerations.
In this paper, we critically reconsider and discuss the models used in one of our previous work to calculate the local convective heat flux for forced air-flows inside narrow rectangular channel, in order to evaluate the limitations which may be inherent with them. To this end, several numerical FEM models have been developed in COMSOL™ and used to analyze in depth previous data processing procedures; furthermore, experimental tests are made on the channel materials, to determine their thermal conductivities and radiative properties. Here, the results of this analysis are presented and discussed.