The utilization of plant oils as a renewable resource for the production of polyurethane adhesives presents a promising way to improve sustainability and reduce environmental impact. This review explores the potential of various vegetable oils, including waste oils, in the synthesis of polyurethanes as an alternative to conventional petroleum-based raw materials. The investigation highlights the environmental challenges associated with conventional polyurethane production and highlights the benefits of switching to bio-renewable oils. By examining the feasibility and potential applications of vegetable oil-based polyurethanes, this study emphasizes the importance of further research and development in this area to realize the full potential of sustainable polyurethane adhesives. Further research and development in this area are key to overcoming the challenges and realizing the full potential of plant-oil-based polyurethanes in various industrial applications.
This study evaluates the compatibility and innovative applications of unmodified vegetable oils, including rapeseed, sunflower, linseed, castor, and used cooking oils, in the production of sustainable polymeric materials, particularly polyurethane adhesives. Fatty acid composition was characterized using GC-MS, functional groups were identified by FTIR, and physicochemical properties, such as hydroxyl value, acid value, viscosity, and density, were measured using conventional analytical techniques. The results highlight significant differences in the properties of the oils, influencing their suitability for specific industrial applications. Castor oil, with its high ricinoleic acid content and hydroxyl value, was identified as the most suitable option for bio-based polyols and polyurethane production. Compatibility tests confirmed that unmodified oils can be effectively blended with polyols, ensuring stability and homogeneity without chemical modification. This approach simplifies production, reduces reliance on petrochemical feedstocks, and advances the development of environmentally friendly polyurethane adhesives. Future research will focus on optimizing formulations and assessing the long-term performance of adhesives incorporating unmodified vegetable oils.
This work compares reactive (castor) and non-reactive (rapeseed, sunflower, linseed, and used cooking) oils, each at a dosage of 10 wt%, when incorporated into an in-house two-component polyurethane (PU) parquet adhesive. A commercial market adhesive was tested only as an external benchmark and was not modified. Mechanical properties were evaluated according to EN ISO 17178, inorganic leaching according to EN 12457-4, and volatile organics were screened by headspace GC–MS (not comparable to ISO 16000-9 chamber protocols). All in-house formulations met the EN ISO 17178 acceptance limits. The sunflower oil variant showed the highest shear strength, whereas rapeseed and castor oils provided stable tensile performance. HS-GC-MS did not yield high-confidence VOC identifications; therefore, no regulatory emission claim is made. The formulation with used cooking oil exhibited the largest variability and elevated leaching of Zn and Sb, underscoring the need for feedstock quality control. At 10 wt% loading, standard-compliant performance was obtained with both reactive and non-reactive oils, suggesting that physical modification can be sufficient, while castor oil may additionally react. In contrast to derivatized oils reported elsewhere, our approach employs unmodified oils, thereby avoiding extra reaction steps—such as epoxidation, hydroxylation, and transesterification—that typically increase the carbon footprint, while still meeting relevant standards. Full VOC chamber testing and LCA are beyond the scope of this study.
This study aimed to evaluate the effect of replacing chalk with fly ash in a two-component polyurethane (2C PU) adhesive on its physicochemical, mechanical, and environmental properties, as a practical application of circular economy principles. Six adhesive formulations were prepared, each containing a chalk-to-fly ash ratio as a filler. The study evaluated rheological, mechanical, thermal, and environmental parameters. Mechanical tests confirmed cohesive failure within the bonded material, indicating that the bond strength at the adhesive–substrate interface exceeded the internal strength of the substrate. The highest contaminant elution levels recorded were 0.62 mg/kg for molybdenum and 0.20 mg/kg for selenium, which represent only 6.2% and 40% of the regulatory limits, respectively. Dissolved organic carbon (DOC) and total dissolved solids (TDS) did not exceed 340 mg/kg and 4260 mg/kg, respectively. GC-MS analysis did not reveal the presence of prominent volatile organic compound emissions. Initial screening suggests possible compatibility with low-emission certification schemes (e.g., A+, AgBB, EMICODE®), though confirmation requires further quantitative testing. The results demonstrate that fly ash can be an effective substitute for chalk in polyurethane adhesives, ensuring environmental compliance and maintaining functional performance while supporting the principles of the circular economy.