The food product industry is increasingly looking for foods with nutritional properties that can provide health benefits. Additionally, a challenge for the food industry is the use of all raw materials. For these reasons, banana peel that is a raw material from Banana (Musa spp.) fruit emerges as potential for new food product development. Here, we developed powder blends using a lyophilization process for the preparation of flour to potential use in cookies, bread, and pasta products. Three formulations were designed; the main difference in the formulations was the use of banana peel concentration. Our results showed that blends produced with banana peel presented physical–chemical properties considered suitable for use in food industry. Moreover, the evaluated morphological parameters reveal the properties of the powders. The blends formulated with banana peel have more antioxidant properties, showing that the banana peel may be an attractive option to generate powders with high antioxidant properties.

Among the vegetables that stand out for their high concentration of anthocyanins, red cabbage appears as one of the most-used sources of these pigments in food production and it is considered a suitable raw material for the extraction of natural dye. Therefore, the objective was to carry out the production of natural extracts from red cabbage, under different conditions, varying the solvent, type of pre-treatment, pH range, and processing temperature during the concentration of the extracts. The anthocyanins were extracted from red cabbage using the following solvents: distilled water, 25% ethyl alcohol, and 70% ethyl alcohol. The raw material was divided into two groups, the first was subjected to a drying pre-treatment at 70 °C for 1 h and for the second group, the extraction was performed with the raw material in natura. Two pH ranges of 4.0 and 6.0 and extraction temperatures of 25 °C and 75 °C were used in the extracts, resulting in 24 formulations. The extracts obtained were analyzed for colorimetric parameters and anthocyanins. The results of anthocyanins show that the methodology that uses 25% alcohol, pH 4.0, and processing temperature of 25 °C produces a reddish extract and better results in the extraction, presenting average values of 191.37 mg/100 g of anthocyanins, being 74% higher compared to the highest values obtained in the other extracts where the same raw material was used and the solvents differed.

The residue generated from the processing of Tacinga inamoena (cumbeba) fruit pulp represents a large amount of material that is discarded without proper application. Despite that, it is a raw material that is source of ascorbic acid, carotenoids and phenolic compounds, which are valued in nutraceutical diets for allegedly combating free radicals generated in metabolism. This research paper presents a study focused on the mathematical modeling of drying kinetics and the effect of the process on the level of bioactive of cumbeba residue. The experiments of cumbeba residue drying (untreated or whole residue (WR), crushed residue (CR) and residue in the form of foam (FR)) were carried out in a fixed-bed dryer at four air temperatures (50, 60, 70 and 80 °C). Effective water diffusivity (D_eff) was determined by the inverse method and its dependence on temperature was described by an Arrhenius-type equation. It was observed that, regardless of the type of pretreatment, the increase in air temperature resulted in higher rate of water removal. The Midilli model showed better simulation of cumbeba residue drying kinetics than the other models tested within the experimental temperature range studied. Effective water diffusivity (D_eff) ranged from 6.4890 to 11.1900 × 10⁻⁶ m²/s, 2.9285 to 12.754 × 10⁻⁹ m²/s and 1.5393 × 10⁻⁸ to 12.4270 × 10⁻⁶ m²/s with activation energy of 22.3078, 46.7115 and 58.0736 kJ/mol within the temperature range of 50–80 °C obtained for the whole cumbeba, crushed cumbeba and cumbeba residue in the form of foam, respectively. In relation to bioactive compounds, it was observed that for a fixed temperature the whole residue had higher retention of bioactive compounds, especially phenolic compounds, whereas the crushed residue and the residue in the form of foam had intermediate and lower levels, respectively. This study provides evidence that cumbeba residue in its whole form can be used for the recovery of natural antioxidant bioactive compounds, mainly phenolic compounds, with the possibility of application in the food and pharmaceutical industries.

The highly nutritional caja fruit (Spondias mombin L.) is an accessible source of vitamins and antioxidants that are indispensable for the human diet. The objective of the present work was to study the production of a probiotic caja pulp using Bifidobacterium animalis ssp. lactis B94. Firstly, a kinetic study was performed on the fermentation of the caja pulp with Bifidobacterium animalis ssp. lactis B94 to determine the optimum conditions of the process. Growth kinetics revealed that the ideal time for ending the fermentation would be at 22 h because it corresponds to the end of the exponential phase. Both the whole pulp and the probiotic pulp were characterized for pH, acidity, total soluble solids, water content, phenolic content, reducing carbohydrates, ascorbic acid, and total carotenoids. Physicochemical characterization revealed similar results between the whole and the probiotic pulp. The stability test demonstrated that the probiotic pulp is stable and preserved the probiotic attributes of the final product. In conclusion, our results reveal that caja pulp can be considered a favorable medium for the Bifidobacterium animalis ssp. lactis B94 growth and consequently can be explored biotechnologically for new food products.

This study investigated the effects of fermenting plum pulp with Bifidobacterium animalis ssp. lactis (BAL) on its physicochemical and bioactive properties, as well as the optimization of the freeze-drying (FD) process to develop a fruit-based probiotic delivery system. Fermentation significantly reduced the pH and total acidity of the pulp, achieving a cell viability of 11 log CFU/mL. The FD process was optimized using a factorial design, with maltodextrin concentration (3, 5, and 7%) and freezing temperature (−150, −100, and −50 °C) as variables. The P2 experiment, which used 7% maltodextrin and freezing at −150 °C, showed the best results in terms of yield (25.67%), cell viability (8 log CFU/g), and probiotic survival rate (97.66%). Samples P5, P6, and P7, prepared with 5% maltodextrin and freezing at −100 °C, exhibited the highest levels of bioactive compounds and antioxidant activity (p < 0.05). During 28 days of storage, all samples maintained cell viability without significant logarithmic reduction. In summary, probiotic plum powders offer an excellent plant-based alternative for probiotic consumption, providing safe levels of beneficial bacteria and bioactive compounds with antioxidant action, meeting health and nutrition needs.

Fruit mixed pulp has the objective of improving the nutritional and sensorial characteristics, as well as the development of new flavours and aromas. Different methods of drying (e.g., spray-drying, spouted bed drying, and freeze-drying) can influence the quality of the final product. The objective of this study was to select the drying method that enables the production of acerola-ceriguela mixed pulp (ACMP) with higher quality. For this selection, the powder pulps were evaluated for their physicochemical characteristics (water activity, moisture, soluble solids (SS), titratable acidity (TA), SS/TA, and instrumental colour), retention of the bioactive compounds (ascorbic acid, total carotenoids, and phenolic compounds), and sensory evaluation (acceptance, check-all-that-apply (CATA), and intent to purchase). The physicochemical characteristics of the freeze-dried and spray-dried ACMP were nonsignificant but differed significantly from spouted bed powder. ACMP freeze-drying powder resulted in higher retention of ascorbic acid, total carotenoids, and phenolic compounds. The powder obtained by spray-drying showed higher retention of bioactive compounds compared to the spouted bed drying. Therefore, this study suggests that powder obtained by freeze-drying resulted in greater sensorial acceptance.