Electrohydrostatic actuators (EHAs), as a class of pump-controlled hydraulic actuators, are known for energy efficiency and easy maintainability. Thus, they can be widely used in the situations where actuating pressure/force control of hydraulic actuators is essential. Examples are automotive active suspension, deep-drawing press, molding machine, and vibration isolation. However, a leaky piston seal in an EHA system can be especially problematic as it is not visually detectable, but causes internal leakage flowing across actuator chambers impairing the performance. This paper employs quantitative feedback theory (QFT) to design a robust fixed-gain linear actuating pressure controller that is tolerant to actuator internal leakage. Since QFT captures uncertainties by templates, representing frequency responses of the plant on Nichols chart, the first step, to design a QFT controller, is to establish plant templates. In doing so, a set of offline parametric system identifications are implemented, and the family of identified models, providing frequency responses, are used to design the QFT fault-tolerant controller. The controller also satisfies the prescribed design tolerances on tracking, stability and sensitivity (disturbance rejection at plant output) under different conditions, including various levels of actuator internal leakage, environmental stiffnesses, and load masses. The ability of the controller to maintain actuating pressure within the acceptable response envelope is demonstrated in experiments. The experimental results show that the system specifications are satisfied despite internal leakage up to 12 L/min.
15 September 2022 in Mathematical Problems in Engineering
Single-rod cylinders are generally employed in electro-hydrostatic actuators (EHAs). A condition that is difficult to detect and could degrade the performance in single-rod EHAs, is the faulty cylinder piston seal. It causes internal leakage from one chamber of the actuator to another. In this work, a position controller with tolerance to actuator internal leakage is synthesized for a single-rod EHA using quantitative feedback theory (QFT). The controller is also robust to different loading and environmental stiffnesses. The ability of the controller is compared with another QFT controller that is synthesized without considering leakage fault. The simulation results show that the QFT fault-tolerant controller can meet prescribed specifications despite internal leakage up to 8.6 L/min.
The mechanical performance of pure copper can be significantly strengthened by adding graphene without greatly sacrificing its electrical and thermal conductivity. However, it is difficult to observe the deformation behavior of Cu/graphene composites efficiently and optically using experiments due to the extremely small graphene size. Herein, Cu/graphene composites with different graphene positions and layers were built to investigate the effect of these factors on the mechanical performance of the composites and the deformation mechanisms using molecular dynamics simulations. The results showed that the maximum indentation force and hardness of the composites decreased significantly with an increase in the distance from graphene to the indentation surface. Graphene strengthened the mechanical properties of Cu/graphene composites by hindering the slip of dislocations. As the graphene layers increased, the strengthening effect became more pronounced. With more graphene layers, dislocations within the Cu matrix were required to overcome higher stress to be released towards the surface; thus, they had to store enough energy to allow more crystalline surfaces to slip, resulting in more dislocations being generated.
In practical engineering applications, the vibration is often generated in various directions and can be harmful to the engineering equipment. Thus, it is necessary to develop vibration isolators that can reduce vibration in multiple directions. In this paper, we propose a planar two-dimensional vibration isolator based on compliant mechanisms. The proposed mechanism consists of two negative stiffness-compliant modules and two positive stiffness-compliant modules, which leads to the quasi-zero stiffness (QZS) property in the mechanism. The dynamic model is established by using the third-order Taylor expansion and the harmonic balance method. Based on the dynamic model, the influence of different parameters on the displacement transmissibility is discussed, including damping ratio, system stiffness, and excitation amplitude. Finally, we conducted the vibration isolation experiments and obtained the displacement transmissibility of the isolator. The results verify that the proposed isolator has good isolation performance for low-frequency vibration.
This study presents a compound control algorithm that enhances the servo accuracy and disturbance suppression capability of direct drive components (DDCs). The servo performance of DDCs is easily affected by external disturbance and the deterioration of assembly characteristics due to a lack of deceleration device. The purpose of this study is to compensate for the impact of external and internal disturbances on the system. First, a linear state space model of the system is established. Second, we analyzed the main factors restricting the performance of DDCs which includes sensor noise, friction and external disturbance. Then, a fractional-order proportional integral (FOPI) controller was used to eliminate the steady-state error caused by the time-invariable disturbance which can also improve the system’s anti-interference capability. A state-augmented Kalman filter (SAKF) was proposed to suppress the quantization noise and compensate for the time-varying disturbances simultaneously. The effectiveness of the proposed compound algorithm was demonstrated by comparative experiments, demonstrating a maximum 89.34% improvement. The experimental results show that, compared with the traditional PI controller, the FOPISAKF controller can not only improve the tracking accuracy of the system, but also enhance the disturbance suppression ability.