Yoonjin Cho

Ms. Yoonjin Cho

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
TLTaehun Lee
Taehun Lee
HKHaeIn Kim
HaeIn Kim
YCYoonjin Cho
Yoonjin Cho
SLSANGWOO LEE
SANGWOO LEE
WLWon-Yong Lee
Won-Yong Lee
JJJaewon Jang
Jaewon Jang
Yttrium oxide (Y2O3) resistive random-access memory (RRAM) devices were fabricated using the sol–gel process on indium tin oxide/glass substrates. These devices exhibited conventional bipolar RRAM characteristics without requiring a high-voltage forming process. The effect of current compliance on the Y2O3 RRAM devices was investigated, and the results revealed that the resistance values gradually decreased with increasing set current compliance values. By regulating these values, the formation of pure Ag conductive filament could be restricted. The dominant oxygen ion diffusion and migration within Y2O3 leads to the formation of oxygen vacancies and Ag metal-mixed conductive filaments between the two electrodes. The filament composition changes from pure Ag metal to Ag metal mixed with oxygen vacancies, which is crucial for realizing multilevel cell (MLC) switching. Consequently, intermediate resistance values were obtained, which were suitable for MLC switching. The fabricated Y2O3 RRAM devices could function as a MLC with a capacity of two bits in one cell, utilizing three low-resistance states and one common high-resistance state. The potential of the Y2O3 RRAM devices for neural networks was further explored through numerical simulations. Hardware neural networks based on the Y2O3 RRAM devices demonstrated effective digit image classification with a high accuracy rate of approximately 88%, comparable to the ideal software-based classification (~92%). This indicates that the proposed RRAM can be utilized as a memory component in practical neuromorphic systems.

16 March 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YCYoonjin Cho
Yoonjin Cho
SLSANGWOO LEE
SANGWOO LEE
SHSeongwon Heo
Seongwon Heo
Jin-Hyuk BaeJin-Hyuk Bae
Jin-Hyuk Bae
IKIn Man Kang
In Man Kang
JJJaewon Jang
Jaewon Jang
Herein, sol–gel-processed Y2O3 resistive random-access memory (RRAM) devices were fabricated. The top electrodes (TEs), such as Ag or Cu, affect the electrical characteristics of the Y2O3 RRAM devices. The oxidation process, mobile ion migration speed, and reduction process all impact the conductive filament formation of the indium–tin–oxide (ITO)/Y2O3/Ag and ITO/Y2O3/Cu RRAM devices. Between Ag and Cu, Cu can easily be oxidized due to its standard redox potential values. However, the conductive filament is easily formed using Ag TEs. After triggering the oxidation process, the formed Ag mobile metal ions can migrate faster inside Y2O3 active channel materials when compared to the formed Cu mobile metal ions. The fast migration inside the Y2O3 active channel materials successfully reduces the SET voltage and improves the number of programming–erasing cycles, i.e., endurance, which is one of the nonvolatile memory parameters. These results elucidate the importance of the electrochemical properties of TEs, providing a deeper understanding of how these factors influence the resistive switching characteristics of metal oxide-based atomic switches and conductive-metal-bridge-filament-based cells.

31 August 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
HKHaeIn Kim
HaeIn Kim
TLTaehun Lee
Taehun Lee
YCYoonjin Cho
Yoonjin Cho
SLSANGWOO LEE
SANGWOO LEE
WLWon-Yong Lee
Won-Yong Lee
JJJaewon Jang
Jaewon Jang
Herein, sol–gel-processed Y2O3–Al2O3 mixed oxide-based resistive random-access-memory (RRAM) devices with different proportions of the involved Y2O3 and Al2O3 precursors were fabricated on indium tin oxide/glass substrates. The corresponding structural, chemical, and electrical properties were investigated. The fabricated devices exhibited conventional bipolar RRAM characteristics without requiring a high-voltage forming process. With an increase in the percentage of Al2O3 precursor above 50 mol%, the crystallinity reduced, with the amorphous phase increasing owing to internal stress. Moreover, with increasing Al2O3 percentage, the lattice oxygen percentage increased and the oxygen vacancy percentage decreased. A 50% Y2O3–50% Al2O3 mixed oxide-based RRAM device exhibited the maximum high-resistance-state/low-resistance-state (HRS/LRS) ratio, as required for a large readout margin and array size. Additionally, this device demonstrated good endurance characteristics, maintaining stability for approximately 100 cycles with a high HRS/LRS ratio (>104). The HRS and LRS resistances were also retained up to 104 s without considerable degradation.

1 May 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SLSANGWOO LEE
SANGWOO LEE
YCYoonjin Cho
Yoonjin Cho
SHSeongwon Heo
Seongwon Heo
Jin-Hyuk BaeJin-Hyuk Bae
Jin-Hyuk Bae
IKIn Man Kang
In Man Kang
JJJaewon Jang
Jaewon Jang
In this study, a Y2O3 insulator was fabricated via the sol–gel process and the effect of precursors and annealing processes on its electrical performance was studied. Yttrium(III) acetate hydrate, yttrium(III) nitrate tetrahydrate, yttrium isopropoxide oxide, and yttrium(III) tris (isopropoxide) were used as precursors, and UV/ozone treatment and high-temperature annealing were performed to obtain Y2O3 films from the precursors. The structure and surface morphologies of the films were characterized via grazing-incidence X-ray diffraction and scanning probe microscopy. Chemical component analysis was performed via X-ray spectroscopy. Electrical insulator characteristics were analyzed based on current density versus electrical field data and frequency-dependent dielectric constants. The Y2O3 films fabricated using the acetate precursor and subjected to the UV/ozone treatment showed a uniform and flat surface morphology with the lowest number of oxygen vacancy defects and unwanted byproducts. The corresponding fabricated capacitors showed the lowest current density (Jg) value of 10−8 A/cm2 at 1 MV/cm and a stable dielectric constant in a frequency range of 20 Hz–100 KHz. At 20 Hz, the dielectric constant was 12.28, which decreased to 10.5 at 105 Hz. The results indicate that high-quality, high-k insulators can be fabricated for flexible electronics using suitable precursors and the suggested low-temperature fabrication methods.

27 July 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
TLTaehun Lee
Taehun Lee
HKHaeIn Kim
HaeIn Kim
YCYoonjin Cho
Yoonjin Cho
SLSANGWOO LEE
SANGWOO LEE
WLWon-Yong Lee
Won-Yong Lee
JJJaewon Jang
Jaewon Jang
Yttrium oxide (Y2O3) resistive random-access memory (RRAM) devices were fabricated using the sol–gel process on indium tin oxide/glass substrates. These devices exhibited conventional bipolar RRAM characteristics, without requiring a high voltage forming process. The effect of current compliance on the Y2O3 RRAM devices was investigated and revealed that as the set current compliance values increased, the resistance values gradually decreased. Consequently, intermediate resistance values were obtained, which are suitable for multi-level cell (MLC) switching. The fabricated Y2O3 RRAM devices were capable of functioning as an MLC with a capacity of 2 bits in one cell, utilizing three low resistance states and one common high resistance state. The potential of the Y2O3 RRAM for neural networks was further explored through numerical simulations. Hardware neural networks based on the Y2O3 RRAM demonstrated effective digit image classification with a high accuracy rate of approximately 88%, comparable to the ideal software-based classification (~92%). This suggests that the proposed RRAM has the potential to be utilized as a memory component in practical neuromorphic systems.

28 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
SHSeongwon Heo
Seongwon Heo
SCSoohyun Choi
Soohyun Choi
SLSANGWOO LEE
SANGWOO LEE
YCYoonjin Cho
Yoonjin Cho
Jin-Hyuk BaeJin-Hyuk Bae
Jin-Hyuk Bae
JJJaewon Jang
Jaewon Jang
In this study, Y2O3-based resistive random-access memory (RRAM) devices with a mono-ethanolamine (MEA) stabilizer fabricated using the sol–gel process on indium tin oxide/glass substrates were investigated. The effects of MEA content on the structural, optical, chemical, and electrical characteristics were determined. As the MEA content increased, film thickness and crystallite size decreased. In particular, the increase in MEA content slightly decreased the oxygen vacancy concentration. The decreased film thickness decreased the physical distance for conductive filament formation, generating a strong electric field. However, owing to the lowest oxygen vacancy concentration, a large electrical field is required. To ensure data reliability, the endurance cycles across several devices were measured and presented statistically. Additionally, endurance performance improved with the increase in MEA content. Reduced oxygen vacancy concentration can successfully suppress the excess formation of the Ag conductive filament. This simplifies the transition from the high- to the low-resistance state and vice versa, thereby improving the endurance cycles of the RRAM devices.