Shanshan Qin

Dr. Shanshan Qin

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2024 in Materials
Verified
Journal Article
Open access
PDF file
SQShanshan Qin
Shanshan Qin
CCChuyu Chen
Chuyu Chen
MZMing Zhang
Ming Zhang
This paper comprehensively summarizes moisture transport, ion transport, and mechanical damage models applied to concrete under sulfate attack and drying–wetting cycles. It highlights the essential aspects and principles of each model, emphasizing their significance in understanding the movement of moisture and ions, as well as the resulting mechanical damage within the concrete during these degradation processes. The paper critically analyzes the assumptions made in each model, shedding light on their limitations and implications for prediction accuracy. Two primary challenges faced by current models under sulfate attack and drying–wetting cycles are identified: the limited consideration of the coupled effects of chemical and physical attacks from sulfate, and the unclear mechanism of the sulfate attacks. Future research directions are proposed, focusing on exploring the transport mechanism of sulfate ions under various driving forces and further clarifying the crystallization process and expansion damage mechanism in concrete pores. Addressing these research directions will advance our understanding of sulfate attack under drying–wetting cycles, leading to improved models and mitigation strategies for enhancing the durability and performance of concrete structures.

20 November 2024 in Materials
Verified
Journal Article
Open access
PDF file
CZChaoqun ZENG
Chaoqun ZENG
SQShanshan Qin
Shanshan Qin
ZDZhijun Deng
Zhijun Deng
MZMiaochang Zhu
Miaochang Zhu
Debonding of the primary anode caused by anodic acidification is one of the major failure modes of the impressed current cathodic protection (ICCP) system in reinforced concrete structures. This study used 3D micro X-ray computed tomography (μ-XCT) to monitor the in situ evolution of the anodic acidification-affected zone. Samples were scanned after 0 to 40 days of the accelerated anodic acidification test. The anodic acidification-affected zone was identified in μ-XCT images using the gray level segmentation method. The total volume of this zone was measured using the 3D reconstruction method. It was found that detailed 3D information can be extracted using the 3D reconstruction method. The spatial heterogeneity was analyzed using this reconstructed volume information. The Faraday efficiency was calculated and found to increase after 20 days of operation. It was also found that the affected zone was proportional to the input electrical energy. The proposed model is useful for estimating the durability of an ICCP system.

27 November 2025 in Buildings
Verified
Journal Article
Open access
PDF file
YLYuqing Liu
Yuqing Liu
BHBokai Huang
Bokai Huang
Weijian DingWeijian Ding
Weijian Ding
SQShanshan Qin
Shanshan Qin
YWYuanxing Wang
Yuanxing Wang
YWYu WANG
Yu WANG
Ground granulated blast-furnace slag (GGBS) is a typical supplementary cementitious material that can delay the early hydration of cement. In this study, a novel integrated sensor was employed to continuously monitor the hydration process of cementitious materials and to characterize the influence of GGBS addition on hydration behavior. The monitoring results show that the signal parameters, including amplitude, energy, and frequency domain, varied significantly during hydration. For plain cement paste (0% GGBS), the maximum signal amplitude after 24 h decreased by 28.2% compared with that at 0 h. As the GGBS content increased to 5%, 10%, 20%, 30%, 40%, and 50%, the amplitude reduction ratios increased to 34.1%, 38.1%, 36.8%, 53.1%, 47.4%, and 59.0%, respectively. A similar trend was observed for the signal energy, with corresponding decreases of 34.3%, 41.5%, 39.3%, 44.5%, 53.1%, 47.0%, and 59.5%. These results clearly indicate that the incorporation of GGBS delays the early hydration of cement and suppresses the evolution of ultrasonic response. Short-time Fourier transform analysis further confirmed that the main frequency peak shifted toward a later time with increasing GGBS content, demonstrating the retarding effect of slag on hydration kinetics. This study verifies the feasibility of using integrated sensors for in situ monitoring of the hydration delay process in GGBS-blended cementitious materials.