In this work, Leptosphaerulina sp. (a Colombian native fungus) significantly removed three Isoxazolyl-Penicillin antibiotics (IP): oxacillin (OXA, 16000 μg L-1), cloxacillin (CLX, 17500 μg L-1) and dicloxacillin (DCX, 19000 μg L-1) from water. The biological treatment was performed at pH 5.6, 28 °C, and 160 rpm for 15 days. The biotransformation process and lack of toxicity of the final solutions (antibacterial activity (AA) and cytotoxicity) were tested. The role of enzymes in IP removal was analysed through in vitro studies with enzymatic extracts (crude and pre-purified) from Leptosphaerulina sp., commercial enzymes and enzymatic inhibitors. Furthermore, the applicability of mycoremediation process to a complex matrix (simulated hospital wastewater) was evaluated. IP were considerably abated by the fungus, OXA was the fastest degraded (day 6), followed by CLX (day 7) and DCX (day 8). Antibiotics biodegradation was associated to laccase and versatile peroxidase action. Assays using commercial enzymes (i.e. laccase from Trametes versicolor and horseradish peroxidase) and inhibitors (EDTA, NaCl, sodium acetate, manganese (II) ions) confirmed the significant role of enzymatic transformation. Whereas, biomass sorption was not an important process in the antibiotics elimination. Evaluation of AA against Staphylococcus aureus ATCC 6538 revealed that Leptosphaerulina sp. also eliminated the AA. In addition, the cytotoxicity assay (MTT) on the HepG2 cell line demonstrated that the IP final solutions were non-toxic. Finally, Leptosphaerulina sp. eliminated OXA and its AA from synthetic hospital wastewater at 6 days. All these results evidenced the potential of Leptosphaerulina sp. mycoremediation as a novel environmentally friendly process for the removal of IP from aqueous systems.

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible plastics. They are synthesized by a wide variety of microorganisms (i.e., fungi and bacteria) and some organisms such as plants, which share characteristics with petrochemical-based plastics. The most recent studies focus on finding inexpensive substrates and extraction strategies that allow reducing product costs, thus moving into a widespread market, the market for petroleum-based plastics. In this study, the production of polyhydroxybutyrate (PHB) was evaluated using the native strains,Bacillus megaterium,Bacillussp., andLactococcus lactis, and glycerol reagent grade (GRG), residual glycerol (RGSB) byproduct of biodiesel from palm oil, Jatropha oil, castor oil, waste frying oils, and whey as substrates. Different bacteria-substrate systems were evaluated thrice on a laboratory scale under different conditions of temperature, pH, and substrate concentration, employing 50 mL of broth in 250 mL. The bacterial growth was tested in all systems; however, theB. megateriumGRG system generated the highest accumulation of PHA. The previous approach was allowed to propose a statistical design optimization with RGSB (i.e., RGSB, 15 g/L, pH 7.0, and 25°C). This system reached 2.80 g/L of PHB yield and was the optimal condition tested; however, the optimal biomass 5.42 g/L occurs at pH 9.0 and 25°C, with a substrate concentration of 22 g/L.

The operating conditions of polyhydroxybutyrate (PHB) production processes are among the factors that most influence yields. In this study, we evaluated PHB production synthesized by Bacillus megaterium LVN01. Batch and fed-batch cultures were used to produce PHB from residual glycerol. For this, dry cell weight (DCW) and PHB productivity were analyzed at a preliminary stage by central composite design using batch systems under different temperature, C/N ratio, and fermentation time conditions. The maximum PHB productivity occurred at 30.8 °C, 44.9 mol mol-1, and 39.9 h. The same conditions were tested for studies in fed-batch culture. Fed-batch experiments were comparable to each other, where the DCW was around 1.9 g L-1, with PHB productivities of 29.5 mg L-1 h-1 and 35.6 mg L-1 h-1 for bioreactors of 5 L and 14 L, respectively. The PHB was characterized by NMR, FTIR, DSC, TGA, and DTG analys

The Bacillus megaterium LVN01 species native to Colombia has demonstrated the ability to metabolize different coproducts or industrial waste (such as fique juice, cane molasses, and residual glycerol) and accumulate polyhydroxybutyrate (PHB), giving it potential in the bioplastics industry. In this research, the potential of liquid digestate as a carbon source for the production of PHA polymers in fermentation processes with this bacterial strain was evaluated. Favorably, it was found that B. megaterium utilizes the nutrients from this residual substrate to multiply appropriately and efficiently synthesize poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Bench-scale aerobic batch fermentation, under the operational conditions of this research [volume: 3 L; temperature: 30.8 °C; agitation: 400 rpm; pH: 7.0 ± 0.2; dissolved oxygen: 100% saturation; antifoam: 10% (v/v)], generated maximum values of dry cell weight (DCW) (0.56 g cell L⁻¹) at 60 h, while the maximum PHBV yield (360 mg PHBV L⁻¹) occurred at 16 h, which is very favorable for sustainable degradable bioplastics production. Additionally, GC–MS and NMR analyses confirmed that the PHBV copolymer synthesized by B. megaterium is made up of the monomers 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV). Furthermore, the thermal properties determined by TGA (Tonset = 283.1 °C; Tendset = 296.98 °C; Td = 290.114 °C) and DSC (Tm = °C 155.7 °C; ΔHf = 19.80 J g⁻¹; Xcr = 18.17%) indicate that it is a thermally stable biopolymer with low percentages of crystallinity, providing flexibility that facilitates molding, adaptation, and application in various industrial sectors.