Viktor Moshchil

Dr. Viktor Moshchil

orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
TPTetiana Prikhna
Tetiana Prikhna
VSVladimir Sokolovsky
Vladimir Sokolovsky
VMViktor Moshchil
Viktor Moshchil
The intensive development of hydrogen technologies has made very promising applications of one of the cheapest and easily produced bulk MgB2-based superconductors. These materials are capable of operating effectively at liquid hydrogen temperatures (around 20 K) and are used as elements in various devices, such as magnets, magnetic bearings, fault current limiters, electrical motors, and generators. These applications require mechanically and chemically stable materials with high superconducting characteristics. This review considers the results of superconducting and structural property studies of MgB2-based bulk materials prepared under different pressure–temperature conditions using different promising methods: hot pressing (30 MPa), spark plasma sintering (16–96 MPa), and high quasi-hydrostatic pressures (2 GPa). Much attention has been paid to the study of the correlation between the manufacturing pressure–temperature conditions and superconducting characteristics. The influence of the amount and distribution of oxygen impurity and an excess of boron on superconducting characteristics is analyzed. The dependence of superconducting characteristics on the various additions and changes in material structure caused by these additions are discussed. It is shown that different production conditions and additions improve the superconducting MgB2 bulk properties for various ranges of temperature and magnetic fields, and the optimal technology may be selected according to the application requirements. We briefly discuss the possible applications of MgB2 superconductors in devices, such as fault current limiters and electric machines.

24 April 2002 in Physica C: Superconductivity and its Applications
Verified
Journal Article
Closed access
TPTetiana Prikhna
Tetiana Prikhna
WGW Gawalek
W Gawalek
ASA.B Surzhenko
A.B Surzhenko
VMViktor Moshchil
Viktor Moshchil
NSN.V Sergienko
N.V Sergienko
AVA.V Vlasenko
A.V Vlasenko

1 May 2019 in Ceramics International
Verified
Journal Article
Closed access
TPTetiana Prikhna
Tetiana Prikhna
PBP.P. Barvitskyi
P.P. Barvitskyi
AMA.V. Maznaya
A.V. Maznaya
VMV.B. Muratov
V.B. Muratov
LDL.N. Devin
L.N. Devin
VMViktor Moshchil
Viktor Moshchil

11 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
BRBoranbay Ratov
Boranbay Ratov
VMVolodymyr A. Mechnik
Volodymyr A. Mechnik
Miroslaw RuckiMiroslaw Rucki
Miroslaw Rucki
Edwin Spartak GevorkyanEdwin Spartak Gevorkyan
Edwin Spartak Gevorkyan
NBNikolai Bondarenko
Nikolai Bondarenko
ATArkadiusz Tofil
Arkadiusz Tofil
This paper presents the results of the experimental research on diamond-reinforced composites with WC–Co matrices enhanced with a ZrO2 additive. The samples were prepared using a modified spark plasma sintering method with a directly applied alternating current. The structure and performance of the basic composite 94 wt.%WC–6 wt.%Co was compared with the ones with ZrO2 added in proportions up to 10 wt.%. It was demonstrated that an increase in zirconia content contributed to the intense refinement of the phase components. The composite 25 wt.%Cdiamond–70.5 wt.%WC–4.5 wt.%Co consisted of a hexagonal WC phase with lattice parameters a = 0.2906 nm and c = 0.2837 nm, a cubic phase (a = 1.1112 nm), hexagonal graphite phase (a = 0.2464 nm, c = 0.6711 nm), as well as diamond grits. After the addition of zirconia nanopowder, the sintered composite contained structural WC and Co3W3C phases, amorphous carbon, tetragonal phase t-ZrO2 (a = 0.36019 nm, c = 0.5174 nm), and diamond grits—these structural changes, after an addition of 6 wt.% ZrO2 contributed to an increase in the fracture toughness by more than 20%, up to KIc = 16.9 ± 0.76 MPa·m0.5, with a negligible decrease in the hardness. Moreover, the composite exhibited an alteration of the destruction mechanism after the addition of zirconia, as well as enhanced forces holding the diamond grits in the matrix.

4 December 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TPTetiana Prikhna
Tetiana Prikhna
AKAiswarya Kethamkuzhi
Aiswarya Kethamkuzhi
RVRoxana Vlad
Roxana Vlad
MKMyroslav Karpets
Myroslav Karpets
RKRobert Kluge
Robert Kluge
Teresa PuigTeresa Puig
Teresa Puig
To study the possibility of overdoping with oxygen and, thus, an increase in the charge carrier density, nH(100 K), in RE123 layers (RE = Eu, Gd) with the aim of increasing the critical current density, Jc, oxygenation was carried out in the pressure range of pO2 = 1–160 bar and temperatures of TS = 300–800 °C during τ = 3–12 h of commercial EuBCO and GdBCO coated conductors (CC), from which the protective Cu layer and, in half of the cases, the Ag layer were chemically removed before oxygenation. The evidences of overdoping were observed about what were witnessed an increase of nH(100 K), reduction of c-lattice parameters of RE123 (RE = Eu, Gd) of superconducting layers, behavior of normalized resistivity before superconducting transition, and Jc variation, however, the conditions to achieve optimal doping were not found yet. Treatment under 100 bar of O2 for 3 h of GdBCO_CC (with Ag layer) at 600 °C led to an increase in Jc (77 K, 0 T) from 2.57 to 2.67 MA/cm2, nH(100 K) increased from 6.55 × 1021 to 6.91 × 1021 cm−3, and Jc(5 K, 0 T) = 28.94 MA/cm2 was observed after the treatment. The increase in Jc (77 K, 0 T) from 2.10 to 2.28 MA/cm2 for GdBCO_CC (without Ag layer) was observed after treatment at 300 °C under 100 bar of O2 for 3 h. In the both cases c-parameter of Gd123 decreased from 1.1735(1) to 1.1731(0) nm. For EuBCO_СС after treatment a decrease in c-parameters of Eu123 was observed: from 1.1738(8) to 1.1734(5) nm (for the Ag-coated sample under 100 bar O2 at 300 °C) and from 1.1740(2) to 1.1736(3) nm (for the sample without Ag under 160 bar O2 at 800 °C), but we failed to increase nH(100 K) and Jc of the studied samples. However, the studies are still ongoing.

17 April 2006 in Journal of Materials Processing Technology
Verified
Journal Article
Closed access
TPTetiana Prikhna
Tetiana Prikhna
WGWolfgang Gawalek
Wolfgang Gawalek
NNNikolay Novikov
Nikolay Novikov
YSYaroslav Savchuk
Yaroslav Savchuk
MZMatthias Zeisberger
Matthias Zeisberger
PNPeter Nagorny
Peter Nagorny