Matheus Zanghelini Teixeira

Mr. Matheus Zanghelini Teixeira

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 July 2025 in Buildings
Verified
Journal Article
Open access
PDF file
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
RTRodrigo Figueiredo Terezo
Rodrigo Figueiredo Terezo
CCCamila Alves Corrêa
Camila Alves Corrêa
SSSamuel da Silva Santos
Samuel da Silva Santos
HVHelena Cristina Vieira
Helena Cristina Vieira
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
This study investigates the potential of Eucalyptus benthamii wood from planted forests in southern Brazil for the production of cross-laminated timber (CLT) panels. The performance of E. benthamii CLT panels is compared to that of Pinus spp. panels and European commercial panels (KLH®), using the finite element method applied to a two-story building model. Class 2 of the Brazilian standard ABNT NBR 7190-2 was adopted as the reference for the physical and mechanical properties of Pinus spp., while the European commercial specifications from KLH® were used to represent European reference panels. The results indicate that E. benthamii wood exhibits superior mechanical properties, enabling reductions of 12.5% to 27.3% in panel thickness and a 20.7% decrease in wood volume when compared to Pinus spp., without compromising structural safety. Relative to the KLH® and ETA 06/0138 standards, E. benthamii wood demonstrates higher stiffness (modulus of elasticity of 15,325 MPa vs. 12,000 MPa) and greater flexural strength (109.11 MPa vs. 24 MPa), allowing for the use of thinner panels. Stress and displacement analyses confirm that E. benthamii CLT slabs can withstand critical loads (wind and vertical) within normative limits, with maximum displacements of 18.5 mm. The reduction in material volume (22.8 m3 versus 28.7 m3 for Pinus spp.) suggests potential benefits in terms of environmental impact and logistical efficiency. It can be concluded that E. benthamii represents a sustainable and efficient alternative for CLT panels, combining high structural performance with resource optimization and contributing to the decarbonization of the construction industry.

14 September 2024 in Journal of Adhesion Science and Technology
Verified
Journal Article
Closed access
CCCamila Alves Corrêa
Camila Alves Corrêa
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
PRPolliana D`Angelo Rios
Polliana D`Angelo Rios
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
GLGefferson Costa de Liz
Gefferson Costa de Liz

22 April 2025 in International Wood Products Journal
Verified
Journal Article
Closed access
CCCamila Alves Corrêa
Camila Alves Corrêa
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
MMMaísa Beatriz Koch Mattos
Maísa Beatriz Koch Mattos
HVHelena Cristina Vieira
Helena Cristina Vieira
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
PRPolliana D’aNgelo Rios
Polliana D’aNgelo Rios
Considering the high production of fossil-based waste, such as expanded polystyrene, this study aimed at producing medium-density particle boards (MDP) of Ochroma pyramidale (balsa) with the incorporation of expanded polystyrene (EPS) granules. For this, balsa wood particles, EPS granules (0%, 1%, 3%, and 5%), and urea-formaldehyde resin were used in the formulation. The physical and mechanical properties of the panels were tested according to the Brazilian standard. The addition of EPS provided improvement in the thickness swelling and internal bond properties. The results showed a strong potential to produce particle boards with 5% EPS, leading to a 39% reduction in thickness swelling compared to the control. These panels met the standard's requirements for most properties, except for the modulus of elasticity (MOE), being classified as type P2 panels (non-structural for use in indoor environments).

30 July 2025 in Wood Material Science & Engineering
Verified
Journal Article
Closed access
CCCamila Alves Corrêa
Camila Alves Corrêa
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
HVHelena Cristina Vieira
Helena Cristina Vieira
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
TCTarcisio Franscisco de Camargo
Tarcisio Franscisco de Camargo
RTRodrigo Figueiredo Terezo
Rodrigo Figueiredo Terezo

19 May 2024 in Forests
Verified
Journal Article
Open access
PDF file
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
RTRodrigo Figueiredo Terezo
Rodrigo Figueiredo Terezo
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
GTGustavo Faggiani Tomio
Gustavo Faggiani Tomio
HCHector Bovo Coelho
Hector Bovo Coelho
CCCamila Alves Corrêa
Camila Alves Corrêa
Cross Laminated Timber (CLT) is a structurally complex panel that poses challenges in analysis due to the anisotropic nature of wood and the orthotropic characteristics of the composite. Numerical modeling using the Finite Element Method (FEM) offers a viable solution for analysis, particularly for addressing boundary value problems that are analytically challenging. Therefore, it is crucial to validate the experimental properties to ensure accurate results. The objective of this study was to validate the physical and mechanical properties for structural modeling using FEM, based on the characterization of Eucalyptus benthamii Maiden & Cambage wood and CLT panels. For wood characterization, the basic and apparent density were determined, and mechanical tests, including static bending, parallel-to-grain compression, and shear tests, were conducted. Utilizing the same batch of wood, three-layer CLT panels were manufactured and subjected to a non-destructive three-point bending test. This test was simulated in RFEM finite element software, employing Mindlin’s theory, and the displacements obtained were compared with the experimental method. The results from a Student’s t-test at a 5% significance level indicated no significant difference between the experimental and numerical methods, suggesting that the properties of the experimental E. benthamii CLT panel can be accurately represented by FEM.

31 December 2023 in IMPACT projects
Verified
Journal Article
Open access
PDF file
UDUdesc
Udesc
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
SSSamuel da Silva Santos
Samuel da Silva Santos
RTRodrigo Figueiredo Terezo
Rodrigo Figueiredo Terezo
CCCamila Alves Corrêa
Camila Alves Corrêa
In search of sustainable development, engineered wood is an alternative for the Brazilian construction sector. The focus of the study is on Cross Laminated Timber (CLT), a panel composed of layers of structurally bonded lamellae that forms a rigid and self-supporting structural element, which is used as a wall, floor slab and roof slab. To ensure the quality of the physical-mechanical properties of CLT, studies have been conducted experimentally, analytically and/or numerically, including via numerical modeling by the Finite Element Method (FEM). This paper provides an updated literature review on the structural behavior of CLT by FEM, highlighting the main authors and the advantagesof the method. For this, information was exported from the Scopus® database to the VOSviewer® software and bibliometric maps were performed. The FEM proved to be efficient and reliable according to the referenced articles, besides being very versatile dueto its wide range of possibilities.