Camila Alves Corrêa

Mrs. Camila Alves Corrêa

Departamento de Engenharia Florestal, Universidade do Estado de Santa Catarina, Lages, Brazil

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 July 2025 in Buildings
Verified
Journal Article
Open access
PDF file
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
RTRodrigo Figueiredo Terezo
Rodrigo Figueiredo Terezo
CCCamila Alves Corrêa
Camila Alves Corrêa
SSSamuel da Silva Santos
Samuel da Silva Santos
HVHelena Cristina Vieira
Helena Cristina Vieira
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
This study investigates the potential of Eucalyptus benthamii wood from planted forests in southern Brazil for the production of cross-laminated timber (CLT) panels. The performance of E. benthamii CLT panels is compared to that of Pinus spp. panels and European commercial panels (KLH®), using the finite element method applied to a two-story building model. Class 2 of the Brazilian standard ABNT NBR 7190-2 was adopted as the reference for the physical and mechanical properties of Pinus spp., while the European commercial specifications from KLH® were used to represent European reference panels. The results indicate that E. benthamii wood exhibits superior mechanical properties, enabling reductions of 12.5% to 27.3% in panel thickness and a 20.7% decrease in wood volume when compared to Pinus spp., without compromising structural safety. Relative to the KLH® and ETA 06/0138 standards, E. benthamii wood demonstrates higher stiffness (modulus of elasticity of 15,325 MPa vs. 12,000 MPa) and greater flexural strength (109.11 MPa vs. 24 MPa), allowing for the use of thinner panels. Stress and displacement analyses confirm that E. benthamii CLT slabs can withstand critical loads (wind and vertical) within normative limits, with maximum displacements of 18.5 mm. The reduction in material volume (22.8 m3 versus 28.7 m3 for Pinus spp.) suggests potential benefits in terms of environmental impact and logistical efficiency. It can be concluded that E. benthamii represents a sustainable and efficient alternative for CLT panels, combining high structural performance with resource optimization and contributing to the decarbonization of the construction industry.

14 September 2024 in Journal of Adhesion Science and Technology
Verified
Journal Article
Closed access
CCCamila Alves Corrêa
Camila Alves Corrêa
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
PRPolliana D`Angelo Rios
Polliana D`Angelo Rios
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
GLGefferson Costa de Liz
Gefferson Costa de Liz

23 November 2022 in Ciência Florestal
Verified
Journal Article
Open access
PDF file
KMKarina Soares Modes
Karina Soares Modes
CCCamila Alves Corrêa
Camila Alves Corrêa
MVMagnos Alan Vivian
Magnos Alan Vivian
MJMario Dobner Júnior
Mario Dobner Júnior
A Cunninghamia lanceolata (Lamb.) Hook. é descrita na literatura como uma espécie com boa forma de fuste e rápido crescimento, sendo uma alternativa potencial para implantação de novos povoamentos florestais no Brasil. O estudo teve como objetivo avaliar as propriedades físicas e mecânicas da madeira de C. lanceolata em crescimento no estado de Santa Catarina, Brasil, a fim de delinear o seu potencial aos 24 anos como fonte de matéria-prima para a produção de madeira serrada de pequenas dimensões e finalidade estrutural. Foi realizado o abate de três árvores para a determinação da massa específica básica e aparente (12%, 0% e da madeira verde), bem como da estabilidade dimensional e propriedades mecânicas em flexão estática, cisalhamento e compressão paralela à grã. A madeira de C. lanceolata apresentou densidade básica classificada como leve e inferior à registrada para indivíduos da mesma espécie em crescimento na China. Já os parâmetros relacionados à estabilidade dimensional da madeira foram similares. De maneira geral, a espécie plantada no Brasil apresentou resistência e rigidez ao ensaio de flexão estática inferior e resistência à compressão e ao cisalhamento paralelo superior à apresentada pela mesma espécie de plantios na China. As diferenças observadas em relação aos estudos utilizados para comparação com a mesma espécie podem ser atribuídas, além do local de cultivo, as maiores densidades de plantios utilizados nos povoamentos implantados no país de origem.

1 February 2024 in OBSERVATÓRIO DE LA ECONOMÍA LATINOAMERICANA
Verified
Journal Article
Open access
PDF file
CCCamila Alves Corrêa
Camila Alves Corrêa
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
ASAngela Silva dos Santos
Angela Silva dos Santos
JTJoão Luiz Tambosi
João Luiz Tambosi
PRPolliana D`Angelo Rios
Polliana D`Angelo Rios
A espécie Paulownia fortunei, originária da China, vem despertando interesse da indústria devido ao seu rápido crescimento, curta rotação e boa adaptabilidade a condições climáticas adversas, sendo apontada como uma alternativa potencial para implementação de povoamentos florestais no Brasil. O estudo teve como objetivo avaliar as propriedades físicas e mecânicas da madeira de Paulownia fortunei em crescimento no Estado de Santa Catarina - Brasil, visando determinar o seu potencial aos 4 anos de idade como fonte de matéria-prima para a produção de produtos sólidos. Para a caracterização física, as condições do ensaio foram definidas de acordo com a norma ASTM D- 143 (1995) e para mecânica utilizou-se as normas COPANT 30: 1-006 (1972), COPANT 30: 1-007 (1971), COPANT 30: 1-009 (1971) e NBR 7190 (2022). Os resultados mostraram que a madeira de Paulownia fortunei apresenta densidade básica classificada como leve, com estabilidade dimensional intermediária e baixa resistência mecânica. Com base nessas propriedades, a espécie Paulownia fortunei em curtas rotações apresenta potencial para diversos usos, principalmente para produção de pequenos objetos de madeira e aplicações em que a baixa densidade seja a característica de interesse, sendo uma opção viável em aplicações não estruturais ou situações que não requerem resistência a esforços excessivos.

22 April 2025 in International Wood Products Journal
Verified
Journal Article
Closed access
CCCamila Alves Corrêa
Camila Alves Corrêa
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
MMMaísa Beatriz Koch Mattos
Maísa Beatriz Koch Mattos
HVHelena Cristina Vieira
Helena Cristina Vieira
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
PRPolliana D’aNgelo Rios
Polliana D’aNgelo Rios
Considering the high production of fossil-based waste, such as expanded polystyrene, this study aimed at producing medium-density particle boards (MDP) of Ochroma pyramidale (balsa) with the incorporation of expanded polystyrene (EPS) granules. For this, balsa wood particles, EPS granules (0%, 1%, 3%, and 5%), and urea-formaldehyde resin were used in the formulation. The physical and mechanical properties of the panels were tested according to the Brazilian standard. The addition of EPS provided improvement in the thickness swelling and internal bond properties. The results showed a strong potential to produce particle boards with 5% EPS, leading to a 39% reduction in thickness swelling compared to the control. These panels met the standard's requirements for most properties, except for the modulus of elasticity (MOE), being classified as type P2 panels (non-structural for use in indoor environments).

19 May 2024 in Forests
Verified
Journal Article
Open access
PDF file
Matheus Zanghelini TeixeiraMatheus Zanghelini Teixeira
Matheus Zanghelini Teixeira
RTRodrigo Figueiredo Terezo
Rodrigo Figueiredo Terezo
ACAlexsandro Bayestortff da Cunha
Alexsandro Bayestortff da Cunha
GTGustavo Faggiani Tomio
Gustavo Faggiani Tomio
HCHector Bovo Coelho
Hector Bovo Coelho
CCCamila Alves Corrêa
Camila Alves Corrêa
Cross Laminated Timber (CLT) is a structurally complex panel that poses challenges in analysis due to the anisotropic nature of wood and the orthotropic characteristics of the composite. Numerical modeling using the Finite Element Method (FEM) offers a viable solution for analysis, particularly for addressing boundary value problems that are analytically challenging. Therefore, it is crucial to validate the experimental properties to ensure accurate results. The objective of this study was to validate the physical and mechanical properties for structural modeling using FEM, based on the characterization of Eucalyptus benthamii Maiden & Cambage wood and CLT panels. For wood characterization, the basic and apparent density were determined, and mechanical tests, including static bending, parallel-to-grain compression, and shear tests, were conducted. Utilizing the same batch of wood, three-layer CLT panels were manufactured and subjected to a non-destructive three-point bending test. This test was simulated in RFEM finite element software, employing Mindlin’s theory, and the displacements obtained were compared with the experimental method. The results from a Student’s t-test at a 5% significance level indicated no significant difference between the experimental and numerical methods, suggesting that the properties of the experimental E. benthamii CLT panel can be accurately represented by FEM.