Yi-Kai Huang

Mr. Yi-Kai Huang

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 November 2024 in Photonics
Verified
Journal Article
Open access
PDF file
YHYi-Kai Huang
Yi-Kai Huang
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
A space-borne telescope is used for Earth observation at about 500 km above sea level in the thermosphere where the air density is very low and the temperature increases significantly during daytime. If the telescopes are aligned and characterized on the ground with standard temperature and pressure (STP) conditions, different from that of the thermosphere, their performance could drift during their mission. Therefore, they are usually placed in a thermal vacuum chamber during ground testing in order to verify the system can perform well and withstand the harsh environment such as a high vacuum level and large temperature variations before being launched. Nevertheless, it remains a challenge to build up an in situ optical measurement system for a large aperture telescope in a thermal vacuum chamber due to the finite internal space of the chamber, limited aperture size of the vacuum view port and thermal dissipation problem of the measuring instruments. In this paper, a novel architecture of an interferometer whose light path travels across a vacuum chamber and an atmospheric environment has been proposed to resolve all of these technical issues. The major feature of the architecture is the diverger lens being located within the vacuum chamber, leaving the rest of the interferometer outside. The variation of the interference fringe due to the relocation of the diverger lens has been investigated with optical simulations and the solutions for compensation have also been proposed. Together with a specific alignment procedure for the proposed architecture, the interferogram has been successfully acquired from a prototype testbed.

11 May 2024 in Photonics
Verified
Journal Article
Open access
PDF file
YHYi-Kai Huang
Yi-Kai Huang
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
A high-precision catadioptric telescope such as a space-borne telescope is usually tested with interferometer to check the optical quality in assembly. The coarse and fine alignment of the telescope are mainly based on the information from the coordinate measuring machine and the fringe pattern of the interferometer, respectively. In addition, further fine-tuning can be achieved according to the variation in wavefront error and Zernike data. The issue is that the vast majority of the catadioptric telescopes contain plural lens surfaces which could produce unwanted ghost fringes, disturbing the wavefront measurement. Technically, off-axis installation to shift away ghost fringes from central interferogram could be acceptable in some cases. Nevertheless, in this paper, the source of ghost fringe in interferometric measurement for catadioptric telescopes is investigated with light path simulation, and a solution of reducing the f-number of the diverger lens is proposed to eliminate the ghost fringe disturbance. Both simulation and experimental results verify the effectiveness of the proposed concept.