Cheng-Huan Chen

Prof. Dr. Cheng-Huan Chen

Department of Photonics, Institute of Electro-Optical Engineering, College of Electrical and Computer Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2025 in Sensors
Verified
Journal Article
Open access
PDF file
JYJui-Hsiang Yen
Jui-Hsiang Yen
SLShao-Jung Li
Shao-Jung Li
ZFZih-Ying Fang
Zih-Ying Fang
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
Flash LiDAR can be used to capture the depth information or contour profile of a target area in one shot and, therefore, has become an important feature in depth sensing devices. Current flash LiDAR devices still suffer from resolution issues due to difficulties in reducing the pixel size of the array sensor. In this paper, a solution has been proposed to resolve this resolution issue by introducing multi-view imaging optics into the flash LiDAR device. Together with scanning illumination over the target area and range image tiling, a fourfold increase in spatial resolution has been achieved, and the working concept can be further extended for resolution enhancement via array expansion. A calibration procedure and shielding mechanism have also been developed to compensate for the issues of crosstalk and stray light, ensuring the quality of the tiled range image. The prototype and corresponding experiment have demonstrated the feasibility of the proposed architecture as an optical solution for enhancing the resolution of flash LiDAR.

25 October 2025 in Photonics
Verified
Journal Article
Open access
PDF file
KWKUO-CHUAN WANG
KUO-CHUAN WANG
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
A star tracker lens works in the environment with the temperatures ranging from −40 °C to 80 °C (a range of 120 °C), which makes athermalization a crucial step in the design. Traditional approaches could spend quite an amount of iterative process in between the optimization for nominal condition and athermalization. It is highly desired that the optimization can start with a thermally robust layout to improve the design efficiency. This study takes the star tracker lens module with seven elements as the base for investigating the possible layout variation on dioptric power distribution and thermo-optic coefficient dn/dT of the material, which are the two major factors of the layout interacting with each other to influence the thermal stability of the overall lens module. All the possible layouts are optimized firstly for the nominal condition at T = 20 °C, and only those meeting the optical performance specifications are selected for thermal performance evaluation. A merit function based on a thin lens model which represents the focal plane drift over a temperature range of 120 °C is then used as the criteria for ranking the layout variations passing the first stage. The layouts at top ranking exhibiting low focal plane drift become potential candidates as the final solution. The proposed methodology provides an efficient approach for designing thermally resilient star tracker optics, especially addressing the harsh thermal conditions encountered in Low Earth Orbit missions.

8 September 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JYJui-Hsiang Yen
Jui-Hsiang Yen
ZFZih-Ying Fang
Zih-Ying Fang
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
Traditional non-destructive measurement of surface roughness exploits complete data of bidirectional reflective distribution function (BRDF). The instrument is normally bulky and the process should be conducted off-line, hence it is time-consuming. If only a part of BRDF data can be sufficient to determine the surface roughness, both the measurement equipment and processing time can be significantly reduced. This paper proposes a compact device capable of detecting multiple angular intensities of reflective scattering with different incident angles from different spatial points of the target object at the same time. It is used to evaluate the surface roughness of a standard specimen with arithmetic mean roughness (Ra) values ranging from 0.13 µm to 2.1 µm. The case of measuring two spatial points of the specimen is used for illustrating the calibration procedure of the device and how the data were searched and processed to increase the reliability and robustness for evaluating the surface roughness with reduced data of BRDF. Similar methodologies can be applicable for other real-time detection methods based on the scattering process.

11 May 2024 in Photonics
Verified
Journal Article
Open access
PDF file
YHYi-Kai Huang
Yi-Kai Huang
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
A high-precision catadioptric telescope such as a space-borne telescope is usually tested with interferometer to check the optical quality in assembly. The coarse and fine alignment of the telescope are mainly based on the information from the coordinate measuring machine and the fringe pattern of the interferometer, respectively. In addition, further fine-tuning can be achieved according to the variation in wavefront error and Zernike data. The issue is that the vast majority of the catadioptric telescopes contain plural lens surfaces which could produce unwanted ghost fringes, disturbing the wavefront measurement. Technically, off-axis installation to shift away ghost fringes from central interferogram could be acceptable in some cases. Nevertheless, in this paper, the source of ghost fringe in interferometric measurement for catadioptric telescopes is investigated with light path simulation, and a solution of reducing the f-number of the diverger lens is proposed to eliminate the ghost fringe disturbance. Both simulation and experimental results verify the effectiveness of the proposed concept.

9 April 2026 in Sensors
Verified
Journal Article
Open access
PDF file
KWKUO-CHUAN WANG
KUO-CHUAN WANG
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
Wide-swath longwave infrared (LWIR) imaging from Low Earth Orbit (LEO) demands fast optics and rectilinear (F-tan) mapping for thermal mapping and multi-frame registration. Achieving an F/1.2 aperture with a 112° diagonal field of view (FOV) and distortion within ±5% is challenging, as mapping constraints and field-dominant off-axis aberrations become strongly coupled at large chief-ray angles. The low-distortion target is not only a geometric specification, but also a practical requirement that reduces peripheral compression, helps maintain edge-detail consistency, and lowers digital de-warping effort in the processing pipeline. While traditional LWIR secondary imaging is predominantly restricted to narrow-field cooled systems for cold-stop constraints, the proposed architecture utilizes a curved intermediate image to effectively decouple mapping formation in the field-dominant front objective from aperture-dominant correction in the rear group. Using chalcogenide glasses, the lens achieves a 5.7 mm effective focal length within a 186.9 mm total track. Analysis over the 8–12 μm band confirms performance approaching the diffraction limit at the 50 lp/mm Nyquist frequency alongside stable geometric fidelity across the full field. Thermal analysis from −40 °C to 80 °C and Monte Carlo tolerance analysis demonstrate stable imaging performance and manufacturing feasibility, confirming the effectiveness of the proposed design approach.

30 April 2026 in Photonics
Verified
Journal Article
Open access
PDF file
HHHsin You Hou
Hsin You Hou
Cheng-Huan ChenCheng-Huan Chen
Cheng-Huan Chen
Light field displays offer promising autostereoscopic 3D visualization with continuous parallax, full-color reproduction, and natural depth cues. In practice, ray-tracing simulation is often employed to evaluate the effective viewing zone of light field systems. However, the actual viewing zone in conventional light field systems is significantly smaller than the simulated value, severely limited by narrow viewing angles due to crosstalk from adjacent elemental images. This study proposes an isolated microlens array (i-MLA) architecture incorporating a custom directional mesh (DM)—a 3D-printed light-blocking barrier grid with tapered pitch—to physically isolate each lenslet and completely suppress crosstalk. Combined with optimized extended coding pitch for a target viewing distance, ray-tracing simulations and experiments on a 13.3-inch 4K display with a 7 mm and 5.4 mm pitch MLA demonstrate dramatic improvement. The conventional light field system provides only a 3.4° margin, which is below the minimum angular separation required for binocular viewing, whereas the i-MLA system achieves a 7.4° margin—twice that of the conventional system. Compared with conventional systems, the i-MLA architecture does not increase overall volume; it simply replaces the glass gap with a single, simple optical element to achieve a wider viewing angle while preserving the compact form factor.