Two aluminum-coated silica adsorbents were evaluated using silica sand and microcrystalline silica as aluminum-oxide-based adsorbents with different crystalline silica base materials. The aluminum coating contained mainly amorphous aluminum oxides for both aluminum-coated silica adsorbents. The adsorption of fluoride onto both adsorbents was favorable according to the Langmuir and Freundlich adsorption equations, while the physical adsorption of fluoride occurred for both adsorbents according to the Dubinin–Raduskevish (D-R) equation. The adsorption of fluoride was stronger for aluminum-coated silica sand based on adsorption parameters from the Langmuir, Freundlich, and D-R adsorption equations, with the stronger binding of fluoride likely due to the observed greater specific adsorption. The adsorption capacity determined using the Langmuir equation was about 7 times greater for aluminum-coated microcrystalline silica primarily due to the 1.22-orders-of-magnitude-larger surface area of aluminum-coated microcrystalline silica, whereas the surface-normalized adsorption capacity was 2.4 times greater for aluminum-coated silica sand, possibly due to more aluminum being present on the surface of silica sand. Fluoride adsorption occurred over a broad pH range from 3 to 10 for both adsorbents, with nearly the same pHPZC of 9.6, while aluminum-coated microcrystalline silica displayed a higher selectivity for fluoride adsorption from different natural water sources.
Defluoridation of water was evaluated using a copper–magnesium (Cu-Mg) coated sand (CMCS) as a sustainable adsorbent containing binary metal oxides. The CMCS sorbent coating contained mostly amorphous copper and magnesium oxides in the Cu-Mg coating on the crystalline sand surface. Pseudo-second-order kinetics was observed where most fluoride was removed rapidly within an hour. Favorable adsorption occurred according to the Langmuir and Freundlich adsorption equations, while physisorption occurred according to the Dubinin–Radushkevich (D-R) adsorption equation. The adsorption capacity of the CMCS sorbent based on sorbent surface was similar to various other adsorbents with larger adsorbent surface areas, likely due to the efficacy of the Cu-Mg coating despite the CMCS sorbent’s much smaller surface area. Fluoride was adsorbed effectively from pH 3 to pH 11 through adsorption of anionic fluoride onto the CMCS sorbent’s protonated surface with a pHPZC of 10.5, indicative of electrostatic attraction as the main adsorption mechanism. The CMCS sorbent’s re-coating was conducive to successful recycling and reuse of the CMCS sorbent as a sustainable adsorbent for water defluoridation.
Defluoridation of water was investigated in an adsorption column study using Al-Mg-Ca-coated sand (AMCCS), a ternary metal oxide adsorbent with eco-friendly components that were shown to be effective for water defluoridation, in a batch adsorption study. A packed column of the AMCCS sorbent was evaluated as function of column flow rate, solution type, and sorbent recyclability. Adsorption column experiments included two column flow rates of 2 mL/min and 10 mL/min using two different solutions: deionized water and a synthetic solution representative of groundwater. Greater fluoride column adsorption capacity was obtained at the lower flow rate for both solutions, mainly due to longer contact times between solution and AMCCS sorbent. Adsorption of fluoride occurred through physical adsorption, which followed the Langmuir adsorption model and second-order kinetics for deionized water and synthetic solution. A lower AMCCS column fluoride adsorption capacity was observed for the synthetic solution due to the competition from adsorption of other ions in the synthetic solution, whereas fluoride adsorption by the AMCCS column was influenced by interphase mass transfer to a lesser extent using the synthetic solution than deionized water. The re-coating of spent AMCCS sorbent in the adsorption column resulted in effective recycling and reuse of the AMCCS adsorption column for both deionized water and the synthetic solution, rendering the AMCCS adsorption column a recyclable and sustainable flow through water defluoridation system.