Changning WEI

Dr. Changning WEI

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 February 2024 in Electronics
Verified
Journal Article
Open access
PDF file
ZJZhuoqiao Ji
Zhuoqiao Ji
GSGuang-Hua Sun
Guang-Hua Sun
KWKai-xu Wang
Kai-xu Wang
HWHang Wong
Hang Wong
ZYZhan Yu
Zhan Yu
PLPei Liu
Pei Liu
This work presents a design for a complementary antenna with circular polarization that has a wide operating bandwidth, stable broadside radiation, and stable gain for X-band applications. The proposed antenna consists of an irregular loop and a parasitic electric dipole, which work together to produce equivalent radiation from the magnetic and electric dipoles. By arranging the dipole and the loop in a specific geometry, this antenna effectively generates circularly polarized wave propagation. A substrate integrated coaxial line (SICL) is applied to feed the antenna through an aperture cutting on the ground. The proposed antenna achieves a wide axial ratio (AR) and impedance bandwidths of 27.4% (from 8.5 to 11.22 GHz, for the AR ≤ 3 dB) and 39.6% (from 7.5 to 11.2 GHz, for the reflection coefficient ≤ −10 dB), respectively. Moreover, the antenna maintains a stable broadside radiation pattern across the operating bandwidth, with an average gain of 10 dBic. This proposed antenna design is competitive for X-band wireless communications.

2 December 2025 in Symmetry
Verified
Journal Article
Open access
PDF file
Mingyuan HuMingyuan Hu
Mingyuan Hu
CWChangning WEI
Changning WEI
Lei ZhangLei Zhang
Lei Zhang
PWPing Wang
Ping Wang
DZDongjun Zhang
Dongjun Zhang
TXTongwei Xie
Tongwei Xie
Permanent Magnet Synchronous Motors (PMSMs) exhibit inherent symmetry in their electromagnetic structure yet behave as nonlinear and strongly coupled systems that are susceptible to internal parameter perturbations and external disturbances, posing challenges to effective control under dynamic operating conditions. To address these issues, this paper proposes a sliding mode control strategy for PMSMs that integrates a Novel Adaptive Reaching Law (NARL) and an Improved Terminal Fuzzy Sliding Mode Disturbance Observer (IFTSMDO), denoted as SMC-NARL-IFTSMDO. The NARL is designed with a state-dependent dynamic gain adjustment mechanism and terminal attractive factor characteristics: it increases the gain to ensure fast convergence when the system state is far from the sliding mode surface, and adaptively attenuates the gain to suppress chattering when approaching the sliding mode surface, thereby balancing the contradiction between convergence speed and chattering in traditional sliding mode control. The IFTSMDO constructs a composite sliding mode surface incorporating error derivatives, terminal power terms, and saturation functions, which enhances the sensitivity of disturbance estimation in the small-error stage, avoids high-frequency chattering caused by sign functions, and provides accurate feedforward compensation for the speed loop controller to improve the system’s anti-disturbance capability. Additionally, the asymptotic stability of the proposed control strategy is strictly proven using the Lyapunov stability theory, laying a solid theoretical foundation for its application. Experiments are conducted on a TMS320F28379D DSP-based platform, and quantitative results show that compared with the traditional sliding mode control (SMC-TRL), the proposed strategy reduces the no-load startup response time by 60%, the steady-state speed fluctuation by 60%, and the speed fluctuation under load disturbance by 81.5%, fully demonstrating its superiority in dynamic response and anti-disturbance performance.

20 May 2022 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Closed access
WWWen‐Jing Wu
Wen‐Jing Wu
程一峰 Cheng程一峰 Cheng
程一峰 Cheng
CWChangning WEI
Changning WEI
GWGaofeng Wang
Gaofeng Wang

30 April 2025 in International Journal of Microwave and Wireless Technologies
Verified
Journal Article
Closed access
PDF file
PYPengfei Yu
Pengfei Yu
CWChangning WEI
Changning WEI
LSLiguo Sun
Liguo Sun
ZJZhuoqiao Ji
Zhuoqiao Ji
FYFan Yu
Fan Yu
LWLei Wang
Lei Wang
This paper presents a millimeter-wave end-fire dual-polarized (DP) array antenna with symmetrical radiation patterns and high isolation. The DP radiation element is formed by integrating a quasi-Yagi antenna (providing horizontal polarization) into a pyramidal horn antenna (providing vertical polarization), resulting in a DP radiation element with a symmetrical radiation aperture. To efficiently feed the DP element while maintaining high isolation, a mode-composite full-corporate-feed network is employed, comprising substrate-integrated waveguide supporting the TE10 mode and substrate-integrated coaxial line supporting the TEM mode. This design eliminates the need for additional transition structures, achieving excellent mode isolation and a reduced substrate layer number. A 1 × 4-element DP array prototype operating at 26.5–29.5 GHz using low temperature co-fired ceramic technology was designed, fabricated, and measured. The test results indicate that the prototype achieves an average gain exceeding 10 dBi for both polarizations within the operating band. Thanks to the symmetrical DP radiation element and mode-composite full-corporate-feed network, symmetrical radiation patterns for both polarizations are observed in both the horizontal and vertical planes, along with a high cross-polarization discrimination of 22 dB and polarization port isolation of 35 dB.

3 March 2026 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
PLPeng Lei
Peng Lei
PCPei Chen
Pei Chen
ZYZheng-Gang Yan
Zheng-Gang Yan
Lei WangLei Wang
Lei Wang
CWChangning WEI
Changning WEI
XWXiaochuan Wang
Xiaochuan Wang
A novel shared-aperture antenna (SAA) integrating a fixed-beam reflectarray (RA) and a rapid-scanning leaky-wave antenna (LWA) is proposed. The proposed SAA element consists of two off-centered patches with embedded L -shaped slots for the RA on the top layer and a dual-slot radiator for the LWA on the bottom layer. By introducing a slow-wave (SW) structure in the substrate-integrated waveguide, the $-1$st spatial-harmonic radiation band of the LWA is adjusted to enable co-frequency operation with the RA. In addition, the enhanced dispersion introduced by the SW structure improves the beam-scanning capability, resulting in a 43% enhancement in scanning range with a scanning rate of $35.8^\circ$ /GHz. Measurements show that RA achieves a 22.7 dBi peak gain at 14.4GHz, with 1-dB gain bandwidth of 20.5% (12.2–15.0GHz) and 3-dB gain bandwidth exceeding 40% over 10 to 15GHz. The LWA scans from $-69^\circ$ to $+67^\circ$ across 10.7 to 14.5GHz with a peak gain of 24.4 dBi. Moreover, the measured RA–LWA isolation remains below $-33$ dB, and sidelobe levels remain below $-10$ dB across the operating band.

25 November 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YHYuxing He
Yuxing He
LXLunyong Xiao
Lunyong Xiao
CWChangning WEI
Changning WEI
XZXihua Zou
Xihua Zou
Lianshan YanLianshan Yan
Lianshan Yan
GMGiuseppe Macchiarella
Giuseppe Macchiarella
This work presents a direct synthesis methodology for realizing codesigned filters that integrate low-pass/multi bandpass or high-pass/multi bandpass responses within a unified network. The proposed approach enables independent control over each subband—such as order, bandwidth, and return loss—while supporting flexible placement of transmission zeros (TZs) for enhanced out-of-band selectivity. The synthesis is built upon a new class of characteristic polynomials defined in the nonnormalized $\omega $ -domain, which intrinsically realizes composite low-pass and multi bandpass filtering behavior without requiring frequency transformation. These polynomials are then mapped to a transversal prototype comprising low-pass and bandpass blocks, which can be corresponded to a high-pass/multi bandpass form via $\omega $ -to-1/ $\omega $ inversion. The obtained transversal networks are then simplified into practical topologies through matrix-based manipulations. A series of examples, including synthesis and experimental validations, confirms the effectiveness and flexibility of the method. The proposed technique establishes a legitimate approach toward the integration of complex codesigned filtering functions based on simple resonator and coupling models.