30 April 2025 in International Journal of Microwave and Wireless Technologies
This paper presents a millimeter-wave end-fire dual-polarized (DP) array antenna with symmetrical radiation patterns and high isolation. The DP radiation element is formed by integrating a quasi-Yagi antenna (providing horizontal polarization) into a pyramidal horn antenna (providing vertical polarization), resulting in a DP radiation element with a symmetrical radiation aperture. To efficiently feed the DP element while maintaining high isolation, a mode-composite full-corporate-feed network is employed, comprising substrate-integrated waveguide supporting the TE10 mode and substrate-integrated coaxial line supporting the TEM mode. This design eliminates the need for additional transition structures, achieving excellent mode isolation and a reduced substrate layer number. A 1 × 4-element DP array prototype operating at 26.5–29.5 GHz using low temperature co-fired ceramic technology was designed, fabricated, and measured. The test results indicate that the prototype achieves an average gain exceeding 10 dBi for both polarizations within the operating band. Thanks to the symmetrical DP radiation element and mode-composite full-corporate-feed network, symmetrical radiation patterns for both polarizations are observed in both the horizontal and vertical planes, along with a high cross-polarization discrimination of 22 dB and polarization port isolation of 35 dB.
27 May 2024 in Electronics Letters
This letter proposes a millimeter‐wave dual‐polarized (DP) end‐fire frequency scanning antenna utilizing low temperature co‐fired ceramic (LTCC) technology. The antenna features DP radiating elements, each comprising a quasi‐Yagi antenna for horizontal polarization (H‐pol) and a pyramidal horn antenna for vertical polarization (V‐pol). These elements are excited via a mode‐composited transmission line (MCTL), integrating substrate integrated coaxial line (TEM mode) with substrate integrated waveguide (TE 10 mode). To mitigate phase imbalances between polarizations during beam scanning, a delay line is embedded in each quasi‐Yagi element, ensuring consistent scanning ranges for the two polarizations. Furthermore, the implementation of amplitude weighting in the feeding networks contributes to the enhancement of antenna efficiency. A 1 × 8‐element prototype was fabricated and its performance is assessed. The results show closely matched beam scanning ranges for the two polarizations (±28° for H‐pol and −30° to +34° for V‐pol) across the 26–29 GHz frequency band, with a measured maximum peak gain exceeding 9.2 dBi for both polarizations. The proposed design emerges as a promising candidate for compact mmW frequency scanning front‐end antenna systems.