The incredible current density and high magnetic field generation possible with high-temperature superconductors (HTS) have the potential to revolutionize energy generation, e.g. high-power generators, and compact fusion energy devices. However, an open issue that limits the applications of this class of superconductors is the challenge of rapidly detecting a hot spot which can lead to a quench. Owing to the inherent advantages of fibre optic sensors, they are promising candidates to be integrated in HTS magnets for hot-spot detection. In this paper, closely spaced fibre Bragg gratings (FBG) with the same Bragg wavelength are used to establish an ultra-long FBG (ULFBG) for distributed hot-spot monitoring. We investigate the capability of a 10m ULFBG to detect a small temperature rise at the end of the sensor. The results show that a 10 m long ULFBG can rapidly detect a small hot spot within 1 K temperature rise at 80 K. It is expected that ULFBG can be wavelength-division multiplexed and integrated to superconducting coils to achieve long-distance hot-spot monitoring with extremely high spatial resolution and fast response.
5 April 2022 in Superconductor Science and Technology
The recent adoption of high-Tc superconductor (HTS) wires for ultra-high field magnet windings provide great promise for future applications, such as high-power generators and Tokamak fusion reactors. However, an open issue with the use of HTS is the challenge of rapidly detecting a hot spot which could lead to a quench. Optical fiber sensors have been shown to be promising alternatives to the voltage-based quench detection method. In this paper, we report on ultra-long fiber Bragg gratings (ULFBG) for hotspot detection at cryogenic temperatures using a new detection algorithm. This novel sensing system is suitable for applications in which solely the occurrence of a hotspot but not its precise location is of importance. This is the case e.g. for quench detection in HTS. The developed system provides the advantages of cost reduction and faster response time compared to conventional FBGs with wavelength-division multiplexing and continuous FBGs with time-division multiplexing, respectively. We demonstrate the functionality of the system for the ULFBG with a grating length of 100 mm and 500 mm at 77 K and 90 K respectively. The ULFBG is shown to respond as fast as conventional FBG, to a hot spot as small as 1 K temperature rise. Furthermore, using the proposed signal processing algorithm, ULFBG exhibits much higher signal to noise ratio than that from the conventional FBG. It is believed that artificial intelligence based technique can assist the signal processing algorithm in detecting a small hot spot more rapidly from the big spectral data in real-time.
13 June 2019 in Journal of Biomaterials Science, Polymer Edition
With the rapid development of wearable devices in recent years, stretchable strain sensors based on electrically conductive composites have attracted a great deal of attention owing to their good stretchability and piezoresistivity. However, due to the intrinsic restriction of these types of composites, the conventional stretchable strain sensors cannot do well in all aspect of sensing performance. A stretchable strain sensor based on carbon nanotubes/poly(dimethylsiloxane) composite with the serpentine shape was devised and fabricated. The sensor was readily manufactured through a molding technique. Not only can this sensor distinguish tension strain from transverse or longitudinal direction, but also exhibits good linearity of response to tensile strain. In terms of sensitivity, hysteresis and response time, the stretchable strain sensor showed significant performance. The sensing performance of this proposed stretchable sensor has been demonstrated to be good in this work and it also shows a good prospect for utilization in multifunctional wearable devices.
Optical fiber Bragg gratings (FBGs) are well suited for applications as temperature or/and strain sensors in harsh environments, e.g., detecting thermal hot spots in high-temperature superconductor (HTS) fusion energy magnets at cryogenic temperatures and high radiation environments. To maximize the signal-to-noise ratio (SNR) of the FBGs to a hot spot, we propose to have them mounted in V-shaped grooves of HTS’ copper former. To investigate the differences between different adhesives on transferring strain and heat in this configuration, five arrays of FBGs are mounted in the V-shaped grooves of a copper dog-bone using Scotch-Weld epoxy, Stycast 2850 FT, Apiezon N, and Loctite 5145 silicone. The copper is cycled through tensile forces in a modified universal tensile tester, subjected to a thermal cycle between 293 K and 77 K, and exposed to heat pulse propagations at 293 K and 80 K. The FBGs that are bonded using Stycast show the highest temperature and strain sensitivities at room and cryogenic temperatures. No major differences in the temperature and strain sensitivities have been found between Ormocer and polyimide coated FBGs. Apiezon N is found to transfer strain consistently well below 245 K, which is comparable with other bonding materials in the temperature range between 77 K and 110 K. The FBGs bonded with the four adhesives in the V-groove configurations are shown to have comparable SNRs to a temperature rise of 20 K at 80 K. This paper emphasizes the importance of maximizing the thermal strain transferred from the host material through the bonding agents to achieve high temperature sensitivity of FBGs.