Building collapse is a leading cause of casualties and economic losses during disasters. Accurate and timely assessment of building damage is critical for effective emergency response and recovery efforts. This paper provides a comprehensive review of 242 papers, summarizing the progress and challenges in using deep learning models with remote sensing images for building damage detection. The study specifically examines datasets, deep learning models, and applications. The paper highlights the scarcity of publicly available training datasets for hazard-damaged building detection, with only 13 datasets identified. This scarcity significantly limits the data accessible for deep learning training. Building damage detection models can be classified into single-temporal and bi-temporal methods. The majority of studies focus on single-temporal methods, which utilize post-event images and employ Convolutional Neural Network (CNN) algorithms. These methods have shown promising results in comprehensive performance evaluation. Building damage detection systems typically involve two levels (damaged or undamaged) or four levels (degree of damage) classification. The performance accuracy of these systems varies widely, ranging from 52.2% to 95.82% for two-level classification and 14% to 86.5% for four-level classification. The differences in accuracy can be attributed to both the detection methods and the classification systems used, illustrating the complexity of building damage detection. Based on the current research, challenges in building damage detection include the insufficiency of datasets and limited accuracy in classifying the four damage categories. Future studies could focus on improving detection accuracy by considering different damage categories and exploring the fusion of multi-source data.
Earthquake-induced landslides (EQILs) represent a serious secondary disaster of earthquakes, and conducting an effective assessment of earthquake-induced landslide susceptibility (ELSA) post-earthquake is helpful in reducing risk. In light of the diverse demands for ELSA across different time periods following an earthquake and the growing availability of data, this paper proposes using remote sensing data to dynamically update the ELSA model. By studying the Ms 6.2 earthquake in Jishishan County, Gansu Province, China, on 18 December 2023, rapid assessment results were derived from 12 pre-trained ELSA models combined with the spatial distribution of historical earthquake-related landslides immediately after the earthquake for early warning. Throughout the entire emergency response stage, the ELSA model was dynamically updated by integrating the EQILs points interpreted from remote sensing images as new training data to enhance assessment accuracy. After the emergency phase, the remote sensing interpretation results were compiled to create the new EQILs inventory. A high landslide potential area was identified using a re-trained model based on the updated inventory, offering a valuable reference for risk management during the recovery phase. The study highlights the importance of integrating remote sensing into ELSA model updates and recommends utilizing time-dependent remote sensing data for sampling to enhance the effectiveness of ELSA.
For the problem of remaining useful lifetime (RUL) prediction of nonlinear system, the existing methods have not systematically carried out the studies on nonlinear degradation modeling with measurement error and random effect, priori parameter estimation and the corresponding RUL prediction. In this paper, a nonlinear Wiener process is used to establish a nonlinear degradation model with the consideration of measurement error and random effect to describe the implicitness, personality difference and nonlinearity of degradation process of a class of device. The expectation maximum (EM) algorithm is used to obtain the estimates of the fixed coefficient and the priori distributions of the random coefficients in the degradation model. Using the current monitoring data of the target device, the posteriori distribution of random coefficients is iteratively updated based on Bayesian inference. Using the full-probability formula, the remaining useful lifetime distribution of device is derived based on the first hitting time (FHT) distribution. A simulation example is analyzed to verify the correctness and advantage of this method.
A simply structured distributed estimator is described for estimating the state of a continuous-time, jointly observable, input free, multi-channel linear system whose sensed outputs are distributed across a fixed multi-agent network. The estimator is then extended to non-stationary networks whose neighbor graphs switch according to a switching signal with a dwell time, or switch arbitrarily under appropriate assumptions. The estimator is guaranteed to solve the problem, provided a network-widely shared gain is sufficiently large. The lower bound of the gain is derived. This is accomplished by appealing to the “split-spectrum” approach and exploiting several well-known properties of invariant subspace. The proposed estimators are inherently resilient to abrupt changes in the number of agents and communication links in the inter-agent communication graph upon which the algorithms depend, provided the network is redundantly strongly connected and redundantly jointly observable.
31 March 2017 in International Journal of Multimedia and Ubiquitous Engineering
Accurate identification of building structural types (BSTs) is essential for seismic vulnerability assessment and disaster risk management. Traditional field survey methods are constrained by high costs, low efficiency, and limited scalability. Although remote sensing-based approaches offer strong potential for large area applications, they are often hindered by limited spatial resolution, spectral confusion, and difficulties in capturing information related to internal building structures. To address these limitations, this study proposes a BST classification approach that integrates remote sensing image features with multisource prior knowledge. In addition to conventional remote sensing features derived from building shape, spectral, and texture, multiple types of prior information are incorporated to compensate for the insufficient structural discriminative capability of remote sensing imagery alone. These include distance to roads, terrain conditions, building height, population, gross domestic product (GDP), and nighttime light intensity. Considering the limited number of labeled samples and the high dimensionality of features, fourteen mainstream machine learning algorithms are systematically evaluated. Through feature selection and model optimization, XGBoost is identified as the most effective classifier, achieving the highest weighted F1 score of 78.62%. The results demonstrate that, under the same machine learning model settings, models trained solely on remote sensing features consistently underperform those integrating multisource features combined with feature selection, confirming the effectiveness of synergistically fusing remote sensing features with prior knowledge for improving overall BST classification performance. Further analyses demonstrate that different groups of remote sensing features and prior knowledge are associated with reductions in misclassification between specific BSTs. Compared with approaches based exclusively on remote sensing imagery, the proposed method exhibits higher and more balanced classification performance across different BSTs, with particularly notable advantages for structure categories that are difficult to distinguish using single-source remote sensing features. This study provides the foundation for subsequent seismic vulnerability analysis and related risk studies.