In precision agriculture, after vegetable transplanters plant the seedlings, field management during the seedling stage is necessary to optimize the vegetable yield. Accurately identifying and extracting the centerlines of crop rows during the seedling stage is crucial for achieving the autonomous navigation of robots. However, the transplanted ridges often experience missing seedling rows. Additionally, due to the limited computational resources of field agricultural robots, a more lightweight navigation line fitting algorithm is required. To address these issues, this study focuses on mid-to-high ridges planted with double-row vegetables and develops a seedling band-based navigation line extraction model, a Seedling Navigation Convolutional Neural Network (SN-CNN). Firstly, we proposed the C2f_UIB module, which effectively reduces redundant computations by integrating Network Architecture Search (NAS) technologies, thus improving the model’s efficiency. Additionally, the model incorporates the Simplified Attention Mechanism (SimAM) in the neck section, enhancing the focus on hard-to-recognize samples. The experimental results demonstrate that the proposed SN-CNN model outperforms YOLOv5s, YOLOv7-tiny, YOLOv8n, and YOLOv8s in terms of the model parameters and accuracy. The SN-CNN model has a parameter count of only 2.37 M and achieves an mAP@0.5 of 94.6%. Compared to the baseline model, the parameter count is reduced by 28.4%, and the accuracy is improved by 2%. Finally, for practical deployment, the SN-CNN algorithm was implemented on the NVIDIA Jetson AGX Xavier, an embedded computing platform, to evaluate its real-time performance in navigation line fitting. We compared two fitting methods: Random Sample Consensus (RANSAC) and least squares (LS), using 100 images (50 test images and 50 field-collected images) to assess the accuracy and processing speed. The RANSAC method achieved a root mean square error (RMSE) of 5.7 pixels and a processing time of 25 milliseconds per image, demonstrating a superior fitting accuracy, while meeting the real-time requirements for navigation line detection. This performance highlights the potential of the SN-CNN model as an effective solution for autonomous navigation in field cross-ridge walking robots.

The rapid and accurate detection of broccoli seedling planting quality is crucial for the implementation of robotic intelligent field management. However, existing algorithms often face issues of false detections and missed detections when identifying the categories of broccoli planting quality. For instance, the similarity between the features of broccoli root balls and soil, along with the potential for being obscured by leaves, leads to false detections of “exposed seedlings”. Additionally, features left by the end effector resemble the background, making the detection of the “missed hills” category challenging. Moreover, existing algorithms require substantial computational resources and memory. To address these challenges, we developed Seedling-YOLO, a deep-learning model dedicated to the visual detection of broccoli planting quality. Initially, we designed a new module, the Efficient Layer Aggregation Networks-Pconv (ELAN_P), utilizing partial convolution (Pconv). This module serves as the backbone feature extraction network, effectively reducing redundant calculations. Furthermore, the model incorporates the Content-aware ReAssembly of Features (CARAFE) and Coordinate Attention (CA), enhancing its focus on the long-range spatial information of challenging-to-detect samples. Experimental results demonstrate that our Seedling-YOLO model outperforms YOLOv4-tiny, YOLOv5s, YOLOv7-tiny, and YOLOv7 in terms of speed and precision, particularly in detecting ‘exposed seedlings’ and ‘missed hills’-key categories impacting yield, with Average Precision (AP) values of 94.2% and 92.2%, respectively. The model achieved a mean Average Precision of 0.5 (mAP@0.5) of 94.3% and a frame rate of 29.7 frames per second (FPS). In field tests conducted with double-row vegetable ridges at a plant spacing of 0.4 m and robot speed of 0.6 m/s, Seedling-YOLO exhibited optimal efficiency and precision. It achieved an actual detection precision of 93% and a detection efficiency of 180 plants/min, meeting the requirements for real-time and precise detection. This model can be deployed on seedling replenishment robots, providing a visual solution for robots, thereby enhancing vegetable yield.

The operational performance of cereal seeding machinery influences the yield and quality of cereals. In this article, we review the existing literature on intelligent technologies for cereal seeding machinery, encompassing active controllable seeding actuators, intelligent seeding rate control, and intelligent seed position control systems. In this manuscript, (1) the characteristics and innovative structures of existing motor-driven seed-metering devices and ground surface profiling mechanisms are expounded; (2) state-of-the-art detection principles and applications for soil property sensors are described based on different soil properties; (3) optimal seeding rate decision approaches based on soil properties are summarized; (4) the research state of seeding rate measuring and control technologies is expounded in detail; (5) trajectory control methods for seeding machinery and seeding depth control systems are described based on measurement and control principles; and (6) the present state, limitations, and future development directions of intelligent cereal seeding machinery are described. In the future, more advanced multi-algorithm and multi-sensor fusion technologies for soil property detection, optimal seeding rate decisions, seeding rates, and seed position control are likely to evolve. This review not only expounds the latest studies on intelligent actuating, sensing, and control technologies for intelligent cereal seeding machinery, but also discusses the shortcomings of existing intelligent seeding technologies and future developing trends in detail. This review, therefore, offers a reference for future research in the domain of intelligent seeding machinery for cereals.

To improve the seedling-picking efficiency of the vegetable transplanter and reduce the damage rate of the seedling pot, a reciprocating seedling-picking device driven by full air pressure was designed. In this paper, the structure and working principle of the pneumatic seedling-picking device are introduced. Through the mechanical analysis between the seedling-picking claw and the seedling pot, working parameters such as the stroke and driving force of the pneumatic seedling-picking claw clamping cylinder were determined. According to the action sequence of the seedling-picking mechanism, which is horizontally dispersed and longitudinally conveyed, the pneumatic control scheme of the seedling-picking and -dropping system was formulated. The simulation model for the control loop of the longitudinal cylinder was created with AMESim simulation software, and the simulation analysis was carried out. The Box–Behnken response surface design optimization method was used to determine the best operating parameters of the cylinder. The optimized peak value of shock vibration at the end of the cylinder was optimized from −65.64 mm·s⁻² to 35.41 mm·s⁻², proving that the optimization of pneumatic working parameters has a positive effect on the success rate of seedling picking. The bench test of the seedling-picking mechanism was conducted on 72-hole plug seedlings with two picking frequencies of 120 plants·min⁻¹ and 144 plants·min⁻¹, respectively, and the average seedling leakage rate, seedling damage rate, and seedling pot damage rate at different picking frequencies were counted. The experimental results show that under the two seedling-picking frequencies, the average success rate of seedling picking and throwing after optimization is increased from 96.4% and 92.4% to 97.9% and 95.3%, respectively. This is in line with the requirements of high-speed seedling picking and confirms the rationality of the seedling-picking mechanism design.

To address the inefficiency and instability of automatic transplanting machines, a dual-row seedling pick-up device and its corresponding control system were developed. Existing seedling end-effectors are primarily mechanically controlled, and the seedling needles can easily cause damage to the interior of the bowl. In order to reduce the damage inflicted by the end-effectors to the bowl, this paper conducted a mechanical analysis of the end-effector. At the same time, a buffer optimization analysis was conducted on the operation of the end-effector, and a flexible pneumatic end-effector for seedling picking was designed. The control system combined the detection of multiple sensors to monitor the process of seedling picking and throwing. By coordinating the lifting cylinder and clamping cylinder, the system effectively reduced seedling pot damage while improving seedling picking efficiency. By setting the operating parameters of the servo motor, the goal of low-speed and high-efficiency seedling picking was achieved. To evaluate the performance of the control system, the linear displacement sensors and acceleration testing systems were used to analyze the performance of the seedling throwing. The results showed that the seedling picking efficiency could reach 180 plants min⁻¹, with no significant difference between the actual measured moving distance and the theoretical setting distance. The positioning error remained stable between 0.5 and 0.9 mm, which met the requirements for seedling picking accuracy. The buffer optimization design reduced the peak acceleration of the end-effector from −22.1 m/s² to −13.4 m/s², and the peak value was reduced by 39.4%, which proved the significant effectiveness of the buffer design. A performance test was conducted using 128-hole seed trays and 33-day-old cabbage seedlings for seedling picking and throwing. When the planting frequency reached 90 plants/row·min⁻¹, the average success rate of picking and throwing seedlings was 97.3%. This indicates that the various components of the designed seedling pick-up device work in good coordination during operation, and the control system operates stably. Technical requirements for the automatic mechanical transplanting of tray seedlings were achieved, which can provide reference for research on automatic transplanting machines.

This study is situated against the background of shortages in the agricultural labor force and shortages of cultivated land. In order to improve the intelligence level and operational efficiency of agricultural machinery and solve the problems of difficulties in recognizing navigation lines and a lack of real-time performance of transplanters in the crop-free ridge environment, we propose a crop-free-ridge navigation line recognition method based on an improved YOLOv8 segmentation algorithm. First, this method reduces the parameters and computational complexity of the model by replacing the YOLOv8 backbone network with MobileNetV4 and the feature extraction module C2f with ShuffleNetV2, thereby improving the real-time segmentation of crop-free ridges. Second, we use the least-squares method to fit the obtained point set to accurately obtain navigation lines. Finally, the method is applied to testing and analyzing the field experimental ridges. The results showed that the average precision of the improved neural network model using this method was 90.4%, with a Params of 1.8 M, a FLOPs of 8.8 G, and an FPS of 49.5. The results indicate that the model maintains high accuracy while significantly outperforming Mask-RCNN, YOLACT++, YOLOv8, and YOLO11 in terms of computational speed. The detection frame rate increased significantly, improving the real-time performance of detection. This method uses the least-squares method to fit the 55% ridge contour feature points under the picture, and the fitting navigation line shows no large deviation compared with the image ridge centerline; the result is better than that of the RANSAC fitting method. The research results indicate that this method significantly reduces the size of the model parameters and improves the recognition speed, providing a more efficient solution for the autonomous navigation of intelligent carrier aircraft.