In a flat plate boundary layer, perturbed with streaks, breakdown occurs due to a secondary instability acting on the streaks. An experimental study using a water channel with static turbulence grid revealed the presence of a sinuous secondary instability mode in the bypass transition process. Five sinuous instabilities are investigated in detail in the horizontal plane. The streamwise length scale of the sinuous instability is around 40δ300* and the spanwise scale equals around δ300*. Four main features are found in the underlying streak configuration and developing streak-streak interactions. Firstly, all instabilities arise in a streak configuration where two low-speed streaks are located at a small spanwise distance from each other. Patches of low-speed fluid (forming a discontinuity in the streak pattern) are present in the high-speed streaks surrounding the unstable low-speed streak. As a consequence of the streak-streak interactions at the discontinuities, vortices arise in a staggered configuration. Finally, the vortices develop into three-dimensional structures after which the flow falls apart into smaller three-dimensional flow regions.

Microfluidic devices and micro-pumps are increasingly necessitated in many fields ranging from untethered soft robots, to pharmaceutical and biomedical technology. While realization of such devices is limited by miniaturization constraints of conventional actuators, these restrictions can be resolved by using smart material transducers instead. This paper proposes and investigates the first ionic polymer metal composite (IPMC) actuator-driven linear peristaltic pump. With the aim of designing a monolithic device, our concept is based on a single IPMC actuator that is etched on both sides and cut with kirigami-inspired slits by laser ablation. Our pump has a planar configuration, operates with low activation voltages (< 5 V) and is simple to manufacture and thus miniaturize. We build proof-of-principle prototypes of an open and closed design of our proposed pump concept, model the closed design, and evaluate both configurations experimentally. Results show the feasibility of the proposed IPMC-driven pump. Without any optimization, the open pump achieved pumping rates of 669 pL/s, while the closed pump configuration attained a 4.57 Pa pressure buildup and 9.18 nL/s pumping rate. These results indicate feasibility of the concept, and future work will focus on design optimization.

Paper reports a numerical study on vaneless diffuser flow instability performed for the purpose of better understanding of rotating stall mechanism in radial vaneless diffusers. This analysis is restricted to the two-dimensional flow where effect of wall boundary layers is neglected. Numerical results reveal that a two-dimensional rotating flow instability similar to rotating stall occurs when critical flow angle is exceeded. They also show that the stability limit and the structure of a two dimensional rotating instability are influenced by the configuration geometry and inlet and outlet flow conditions. Good agreement with data from the literature is found for the stability limit and number and speed of propagating cells. Number of cells and their speed is somewhat higher than observed in experiments from literature. This might imply that inception point is caused by the core flow instability and that wall boundary layers are more determinative for the structure of rotating instability.