Yingxin Tang

Dr. Yingxin Tang

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2024 in Metals
Verified
Journal Article
Open access
PDF file
ZYZhu-wen Yan
Zhu-wen Yan
SPShuaizhen Pan
Shuaizhen Pan
YTYingxin Tang
Yingxin Tang
WCWenjun Cao
Wenjun Cao
A three-dimensional elastic–plastic finite element model of a six-roll cold rolling mill has been developed using the finite element software ABAQUS. The actual parameters of the rolling mill have been incorporated into the finite element model, with the working conditions applied as boundary constraints and load conditions. Subsequently, a non-symmetrical bending force is introduced to the finite element model. Through simulation calculations, this study analyzes the patterns of change in the transverse pressure of the rolling mill and roller pressure during non-symmetrical bending, as well as the variations in strip thickness, crown, edge drop, and flatness. Additionally, the regulating function of the bending force is examined. Each adjustment of 5 t in the asymmetric bending force results in an increase of approximately 0.01 mm in the thickness of the positive bending side of the strip while causing a decrease of about 0.01 mm in the thickness of the negative bending side. Therefore, the application of asymmetric bending forces proves to be effective in controlling the shape of lateral wave defects on the edges of steel strips.

11 April 2024 in Coatings
Verified
Journal Article
Open access
PDF file
HBHenan Bu
Henan Bu
TYTeng Yang
Teng Yang
HBHenan Bu
Henan Bu
XZXianpeng Zhu
Xianpeng Zhu
ZGZikang Ge
Zikang Ge
YTYingxin Tang
Yingxin Tang
In recent years, the defect image classification method based on deep transfer learning has been widely explored and researched, and the task of source and target domains with the same painting defect image class has been solved successfully. However, in real applications, due to the complexity and uncertainty of ship painting conditions, it is very likely that there are unknown classes of painting defects, and the traditional deep learning model cannot identify a few classes, which leads to model overfitting and reduces its generalization ability. In this paper, a zero-shot Image classification method for ship painting defects based on IDATLWGAN is proposed to identify new unknown classes of defects in the target domain. The method is based on a deep convolutional neural network combined with adversarial transfer learning. First, a preprocessed ship painting defect dataset is used as input for the domain-invariant feature extractor. Then, the domain invariant feature extractor takes domain invariant features from the source and target domains. Finally, Defect discriminators and domain alignment discriminators are employed to classify the known categories of unlabeled defects and unknown categories of unlabeled defects in the target domain and to further reduce the distance between the edge distributions of the source and target domains. The experimental results show that the proposed model in this paper extracts a better distribution of invariant features in the source and target domains compared to other existing transfer learning models. It can successfully complete the migration task and accurately recognize the painting defects of known categories and new unknown categories, which is a perfect combination of intelligent algorithms and engineering practice.

20 March 2024 in Coatings
Verified
Journal Article
Open access
PDF file
HBHenan Bu
Henan Bu
XZXianpeng Zhu
Xianpeng Zhu
ZGZikang Ge
Zikang Ge
TYTeng Yang
Teng Yang
ZYzhu-wen Yan
zhu-wen Yan
YTYingxin Tang
Yingxin Tang
Ship painting, as one of the three pillars of the shipping industry, runs through the whole process of ship construction. However, there are low scheduling efficiency and excessive carbon emissions in the segmental painting process, and optimizing the scheduling method is an important means to achieve the sustainable development of the ship manufacturing industry. To this end, firstly, a low-carbon scheduling mathematical model for the segmented painting workshop is proposed, aiming to reduce carbon emissions and improve the painting efficiency of the segmented painting workshop. Second, an artificial bee colony algorithm designed based on a decomposition strategy (MD/ABC) is proposed to solve the model. In the first stage, five neighborhood switching methods are designed to achieve the global search employed for each solution. In the second stage, the Technique of Ordering the Ideal Solutions (TOPSIS) improves the competition mechanism through the co-evolution between neighboring subproblems and designs the angle to define the relationship between neighboring subproblems to enhance the localized search and improve population quality. The solution exchange strategy is used in the third stage to improve the efficiency of the algorithm. In addition, a two-stage coding method is designed according to the characteristics of the scheduling problem. Finally, the algorithm before and after the improvement and with other algorithms is analyzed using comparative numerical experiments. The experimental results show the effectiveness of the algorithm in solving the low-carbon scheduling problem of ship segmental painting and can provide reliable guidance for the scheduling program of segmented painting workshops in shipyards.


30 October 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
ZYZhu-Wen Yan
Zhu-Wen Yan
YTYingxin Tang
Yingxin Tang
SPShuai-Zhen Pan
Shuai-Zhen Pan
WCWen-Jun Cao
Wen-Jun Cao
JWJia-Wei Wu
Jia-Wei Wu
During the acceleration phase of continuous cold rolling mill production, transient transitions in rolling speed can lead to dynamic imbalance in the rolling force field. This imbalance induces fluctuations in strip thickness and shape distortions (such as edge waves, center waves, and other defects), which have become critical bottlenecks restricting the quality of high-end cold-rolled products and production line efficiency. Based on the ABAQUS platform, this study constructs a three-dimensional elastoplastic finite element model of a six-roll continuous cold rolling mill, systematically revealing how Work Roll Bending (WRB) and Intermediate Roll Bending (IRB) couple to affect the dynamic response of strip thickness distribution, flatness evolution, cross-sectional crown, and rolling force field. The results demonstrate that increasing WRB shifts the strip thickness distribution from “thick center, thin edges” to “thin center, thick edges,” significantly improving secondary wave defects. Increasing IRB promotes more uniform thickness distribution, but its control capability over quaternary wave defects is relatively weaker. Bending force effectively suppresses shape fluctuations by adjusting rolling force distribution and inter-roll pressure. For the acceleration process, a composite control strategy integrating dynamic bending force compensation and tension cooperative control is proposed, and a segmented speed interval optimization model is established. Simulations show that through segmented speed interval optimization and dynamic compensation, edge wave defects during the acceleration phase are reduced, and thickness uniformity is improved. Optimizing the strip production process during acceleration can effectively enhance production efficiency and reduce production losses. The research outcomes, by establishing a multi-objective coordinated dynamic shape control system, provide theoretical support and engineering implementation pathways for the intelligent process optimization of continuous cold rolling mills during acceleration.

5 June 2025 in Research Square
Verified
Preprint
Open access
PDF file
ZYZhuwen Yan
Zhuwen Yan
YTYingxin Tang
Yingxin Tang
SPShuaizhen Pan
Shuaizhen Pan
WCWenjun Cao
Wenjun Cao
During the accelerated production process of continuous cold rolling mills, transient speed transitions induce dynamic imbalances in the rolling force field, leading to critical strip quality issues such as thickness fluctuations and shape defects (e.g., edge waves, center waves). These defects severely restrict the production efficiency and product quality of high-end cold-rolled strips. To address this challenge, this study establishes a three-dimensional elastoplastic finite element model of a six-roll cold rolling mill on the ABAQUS platform, systematically investigating the dynamic coupling mechanisms between work roll bending (WRB) and intermediate roll bending (IRB) forces on strip thickness distribution, flatness evolution, cross-sectional crown, and rolling force field. A composite control strategy integrating dynamic bending force compensation and tension cooperative control is proposed, supported by a segmented speed interval optimization model.Key findings reveal that increasing WRB shifts strip thickness distribution from a "thick center, thin edges" profile to a "thin center, thick edges" configuration, effectively suppressing secondary wave defects. Conversely, IRB enhances thickness uniformity but exhibits limited control over quaternary wave defects. Both bending forces stabilize the rolling force distribution and inter-roll pressure, with WRB demonstrating superior secondary crown reduction and IRB optimizing edge-to-center thickness gradients. Furthermore, segmented speed interval optimization combined with dynamic compensation reduces edge wave defects by 32% during acceleration and improves thickness uniformity by 18%. These results highlight the effectiveness of the proposed multi-objective dynamic shape control system in balancing production efficiency and product quality. The study provides theoretical insights and practical methodologies for intelligent process optimization in high-speed cold rolling applications.