Solar-boosted photo-technology stands out as a powerful strategy for photosynthesis and photocatalytic processes due to its minimal energy requirements, cost-effectiveness and operation under milder, environmentally friendly conditions compared to conventional thermocatalytic options. The design and development of photocatalysts have received a great deal of attention, whereas photoreactor development must be studied deeper to enable the design of efficient devices for practical exploitation. Furthermore, scale-up issues are important for this application, since light distribution through the photoreactor is a concurrent factor. This review represents a comprehensive study on the development of photoreactors to be used mainly for the photoreduction of CO2 to fuels, but with concepts easily transferable to other photosynthetic applications such as ammonia synthesis and water splitting, or wastewater treatment, photovoltaics combined to photoreactors, etc. The primary categories of photoreactors are thoroughly examined. It is also explained which parameters influence the design of a photoreactor and next-generation high-pressure photoreactors are also discussed. Last but not least, current technologies for solar concentrators are recalled, considering their possible integration within the photoreactor. While many reviews deal with photocatalytic materials, in the authors’ view, photoreactors with significant scale and their merged devices with solar concentrators are still unexploited solutions. These are the key to boost the efficiency of these processes towards commercial viability; thus, the aim of this review is to summarise the main findings on solar photoreactors for the photoreduction of CO2 and for related applications.
30 December 2024 in Industrial & Engineering Chemistry Research
Several Cu and Ni-based catalysts were synthetized over Ce-based supports, either pure or mixed with different amounts of alumina (1:2 and 1:3 mol/mol). Different metal loadings (10–40 wt%) and preparation methods (wet impregnation, co-precipitation, and flame-spray pyrolysis—FSP) were compared for the oxidative steam reforming of methanol. Characterization of the catalysts has been performed, e.g., through XRD, BET, XPS, TPR, SEM, and EDX analyses. All the catalysts have been tested in a bench-scale continuous setup. The hydrogen yield and methanol conversion obtained have been correlated with the operating conditions, metal content, crystallinity of the catalyst particles, total surface area, and with the interaction of the metal with the support. A Cu loading of 20% wt/wt was optimal, while the presence of alumina was not beneficial, decreasing catalyst activity at low temperatures compared with catalysts supported on pure CeO2. Ni-based catalysts were a possible alternative, but the activity towards the methanation reaction at relatively high temperatures decreased inevitably the hydrogen yield. Durability and deactivation tests showed that the best-performing catalyst, 20% wt. Cu/CeO2 prepared through coprecipitation was stable for a long period of time. Full methanol conversion was achieved at 280 °C, and the highest yield of H2 was ca. 80% at 340 °C, higher than the literature data.
26 March 2026 in ACS Sustainable Chemistry & Engineering
The photoreduction of carbon dioxide (CO2) into solar fuels and value-added chemicals is a promising strategy to address climate change and the energy crisis. However, the efficiency of heterogeneous semiconductor-based photocatalytic systems is often hindered by the rapid recombination of charge carriers (electrons and holes). This paper examines the crucial role of the sulfite ion (SO32–) as a hole scavenger during aqueous-phase photoreduction of CO2, achieving the unprecedented productivity of 58 to 67 mol/h kgcat. A new hybrid homogeneous/heterogeneous process has been developed, activated by UVA and UVC irradiation, never reported previously. Low-energy radiation is sufficient to induce the conventional photogeneration of charge carriers responsible for the well-known heterogeneous photocatalytic pathway of CO2 photoconversion to HCOOH. UVC radiation is able to activate a homogeneous direct photolysis of sodium sulfite, with the generation of solvated electrons as powerful reducing species. The synergistic action of both mechanisms demonstrated the possibility to achieve, for the first time, critically relevant amounts of HCOOH produced in a semipilot-scale reactor (ca. 1.5 L size). The effect of high-pressure operation seems also to be a determinant from a kinetic point of view to increase the concentration of available reacting species.
In this work, three catalysts, TiO2, WO3 and TiO2/WO3, have been synthesized through flame spray pyrolysis synthesis (FSP) and have been tested for CO2 photoreduction. The catalysts were fully characterized by XRD, DRS UV–Vis, N2 physisorption and SEM. Experimental tests were performed in a one-of-a-kind high-pressure reactor at 18 bar. TiO2 P25 was used as a benchmark to compare the productivities of the newly synthetized catalysts. The two single oxides showed comparable productivities, both slightly lower than the P25 reference value (ca. 17 mol/kgcat·h). The mixed oxide, TiO2/WO3, instead showed an impressive productivity of formic acid with 36 mol/kgcat·h, which is around 2.5 times higher than both of the single oxides alone. The formation of a type-II heterojunction has been confirmed through DRS analysis. The remarkable productivity demonstrates how FSP synthesis can be a crucial tool to obtain highly active and stable photocatalysts. This approach has already been successfully scaled up for the industrial production of various catalysts, showcasing its versatility and efficiency.